Aumox 5-Port Gigabit PoE Switch with 4 x PoE 78W, Upgraded Fast Network Switch, Durable Metal Casing, IEEE802.3At/Af, Traffic Optimization, Plug and Play Unmanaged Ethernet Switch.
【Fast 4-Port 78W Gigabit PoE Switch】Supporting 802.3at/af network standards, 10/100/1000 Mbps RJ45 ports, including 4x PoE Ports with 1 x Uplink Port. Providing up to 30W per port and total PoE power budget of 78W..
【Fanless Sturdy Metal Case】Fanless design will effectively reduce noise and keep quiet. With durable metal casing, Aumox ethernet PoE switch features excellent durability and heat dissipation..
【Easy Plug and Play Installation】Simple plug and play setup with no APP to install or configuration needed, automatically detect devices, just plug in the power cord and network cable..
【Compact Size for Easy Use】Aumox PoE ethernet switch has small size with 7.9×4.6×1.7 inches, easily positioned on your desktop or a wall, saving more space..
【One-Key VLAN】Support One-Key VLAN, Port 1-4 will be isolated respectively but can communicate with the 5 port. Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing..
Gigabit Ports: 48 gigabit ethernet ports, 4 gigabit SFP, switching capacity is 256Gbps, each port can reach 1G rate at the same time, with higher data throughput. 16K Mac address table, more devices can be connected and can be used in large networks.
High POE Power 600W: Ports 1-4 support IEEE802.3af/at/bt, max 90W. Ports 5-48 support IEEE802.3af/at, max 30W. Built-in power supply, the whole machine supports 600W. *Please note: it will not supply power to passive 24V PoE and NON-PoE devices.*..
Web Managed: Support POE port and Layer 2 management, such as VLAN, Port Aggregation/Mirroring/Isolation, Speed Limitation, Flow Control, Qos, Port Security, Spanning Tree, Multicast, DoS defend, Storm control, DHCP Snooping. Support WEB/Cli/SNMP..
Smart Heat Dissipation: Using 2 industrial-grade fans, intelligent design, automatic start and stop according to the power used, automatic adjustment of the speed, more energy saving and extended use time.
Widely Used: Support status query, port statistics, fault detection, easy to maintenance and management. Durable Metal housing, 1U rackmout, widely used in home/business/project PoE network. Any usage questions please contact our technical support.
24 Port Gigabit Ethernet PoE Switch with 2 Uplink Gigabit Port & 2 SFP Port, YuanLey Unmanaged 24 Port PoE+ Network Switch, Rackmout, Build in 400W Power, Support 802.3af/at, Plug and Play
【28 Port Gigabit PoE+ Switch】Total Max 400W internal power budget, up to 30W per PoE port, add-on 2 gigabit uplink port, 2 SFP port. IEEE802.3af/at compliant, automatically detects and identifies PD devices.Support AI Watchdog intelligent detection. Automatically restart the disconnection devices to make operation and maintenance more easier..
【VLAN Switch】PoE ports will be isolated respectively but can communicate with uplink port,Better Network Bandwidth up to 56 Gbps with higher Security. Ideal for PoE IP Camera, EAP, Access Point, IP Phone and other PD devices..
【6KV Lightning Design】Protect the product and equipment not be damaged even in bad weather. Sturdy Metal Housing supports Desktop or Rack Mount in many different usage scenarios..
【Unmanaged Plug-and-Play】Easy to use and simple set up with no software or configuration needed. Supports auto MDI/MDIX and Non-Blocking Data Forward..
【Customer Service&Technicoal Support】PoE switches are rigorously tested for reliability, quality, and performance. We supply a year warranty for whole products and lifetime technical support..
PORTS: This Inline PoE tester is equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PoE Device connection.
TESTING MODES: The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD.
USER FRIENDLY: The TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box.
COMPATABILITY: The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V..
STEP BUTTON: The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring..
TROUBLESHOOT IN REAL TIME: Troubleshoot PoE issues in real-time on-the-go and accurately test 4PPoE, PoE+, PoE, and passive PoE technologies with this compact and lightweight PoE testing tool..
The UniFi Switch 8-port models feature Gigabit Ethernet ports in a compact form factor. The switches are fully manageable, delivering robust performance and intelligent switching for your networks..
The US-8-60W is an 8-port gigabit switch with four 802.3af PoE ports. Its auto-sensing PoE ports deliver up to 15.4W of power per port..
The new 8-port models feature Gigabit Ethernet ports in a compact form factor. For its total, non-blocking throughput, each UniFi Switch supports up to 8 Gbps..
The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss, with a switching capacity of 16 Gbps..
Cudy 8 Port PoE+ Switch with 2 Gigabit Uplink Ports 120W , 8 10/100Mbps PoE+@120W, Extend/VLAN Mode, 802.3af/at Standard, Fanless, Watchdog, Plug and Play FS1010PG
120 Watts Reliable IEEE 802.3af/802.3at PoE+ switch. 8 10/100Mbps POE Port and 2 Gigabit Uplink Port. Ideal for small installations of 8 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)..
Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.
Extend function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
Plug&play, simple set up with no software or configuration needed. Port-Power-Prioritization technology guarantees continuous power supply of key nodes..
YuanLey 5 Port Gigabit PoE Switch with 4 Port PoE+ 1000Mbps, 802.3af/at 78W Built-in Power, Fanless Metal Unmanaged Plug & Play
[All Gigabit Ports] Includes 4 Gigabit POE ports, 1 Gigabit UpLink Ethernet port, all ports up to 100/1000Mbps speed, has excellent network performance..
[78W High PoE Power] Support IEEE 802.3af/at PoE power supply. The whole power is 78W, up to 30W per port. Suitable for poe power supply for multiple devices..
[Unmanaged Switch] All ports support PoE, and support automatic detection, can connect POE and non-POE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and Play, no configuration required, can be easy installed..
[Extend Function] When the extend mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety..
[Wide Applications] High Power, Built-in power supply. Compact design. Durable Metal. Bilateral heat dissipation. LED activity indicator lights. Can be widely used in security monitoring, computer networks, wireless coverage, office and home networks, etc.. Aslo we provide the best after-sale sevice, 100% Satisfaction..
TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102
ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).
