Best Poe Power Supply

Mikrotik wAP 60Gx3 AP WLAN Access Point Power Over Ethernet (PoE) White

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

Mikrotik CRS328-24P-4S+RM 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case Dual Boot and PoE output 500W

  • Mikrotik CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
  • PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
  • CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in.
  • The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.
  • It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.
Check Stock

MikroTik CRS354-48G-4S+2Q+RM

  • The RB2011iL-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support..
  • It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license..
  • There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA..
  • RouterBOARD 2011iL-IN comes with desktop enclosure and power supply..
  • Wall mount kit for network closet is available for purchase as an optional accessory..
Check Stock

BV-Tech 5 Port PoE+ Switch (4 PoE+ Ports | 1 Uplink Port) – 65W – 802.3af/at – POE-SW501

  • 4 PoE+ Ports and 1 Uplink Port at 10/100Mbps each.
  • 65W Max Power (up to 30W per port) | IEEE 802.3af/at.
  • PD (Power Detection) will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • Compact Design with Internal Power Supply.
  • Lifetime Tech Support and 1 Year US-Based Warranty.
Check Stock

EnGenius Neutron IEEE 802.11n Wireless LAN Controller - 48 x Network (RJ-45) - PoE Ports - Rack-mountable

  • 16 Gigabit and 8 2.5-Gigabit PoE Ethernet Ports.
  • 802.3 at/af PoE+ Ready on All Ports with 410W PoE budget.
  • 4 10-Gigabit Dual-Speed SFP+ (fiber) uplink ports.
  • Real-Time System Metrics, Deep-Dive Analytics and Remote Configurations.
  • Quick-Scan Device Register, Remote Monitoring and Troubleshooting.
  • Continuous PoE Power – Steady supply of PoE power for camera during switch upgrades.
  • 802.3ad Link Aggregation (LACP) Supports Traffic Load Balancing.
  • Energy Efficient Ethernet (802.3az) improves energy savings when used with other compliant devices.
Check Stock

MikroTik Gigabit Ethernet Smart Switch with PoE-out and RouterOS L5 CRS112-8P-4S-IN

  • CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE.
  • Four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.
  • There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately).
  • CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices).
  • Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is [email protected] and [email protected].
Check Stock

Network Cable Tester, Poe Cable Tester for CAT5e/CAT6/CAT6a, Ethernet Network Tester with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR

  • ▶【Three scan modes】AC filter mode/ Analog mode/ PoE mode.
  • ▶【PoE testing】Test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard)..
  • ▶【Hub blink】Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • ▶【Length measurement】Cable length testing accuracy can be up to 98% and 200 m..
  • ▶【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V)..
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

Logitech Mevo Ethernet Power Adapter

  • WIRED RELIABILITY - A reliable wired connection delivers steady power and data to your camera for long-format streams..
  • POE-COMPATIBLE — Seamlessly integrates with Power-over-Ethernet enabled network switches and routers.
  • USB-POWERED — Power via external power supply (sold separately) for use with non-POE networks.
  • LOW-PROFILE DESIGN — The 1x1x3” (3x3x8cm) compact size and design of the Ethernet Power Adapter won’t add complexity or mess to your streaming....
Check Stock

TRENDnet 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch 4 x Gigabit PoE+ Ports Shared Gigabit Port RJ-45/SFP Dedicated SFP 120W Power Budget IP30 Lifetime Protection Black TI-PG62

  • ETHERNET PORT INTERFACE: 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45/ SFP), 1 x Dedicated SFP slot.
  • POE POWER & SWITCHING CAPACITY: The 6 Port Gigabit PoE+ DIN-Rail Switch has a 12 Gbps switching capacity and 120 Watt PoE+ power..
  • EXTREME TEMPERATURE SWITCH: This Gigabit PoE+ Switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • DIN-RAIL & WALL MOUNT KIT: This 6-port Gigabit PoE+ industrial switch comes with an integrated DIN-rail mount and mounting hardware..
  • REDUNDANT POWER: The 6 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S15052, TI-S24052, TI-S12048, TI-S24048, 48VDC3000).
Check Stock