Best Poe Switch 5 Port

Mikrotik CSS326-24G-2S+RM 24 port Gigabit Ethernet switch with two SFP+ ports

  • Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ port.
  • It gives you all the basic functionality for a managed switch, plus more.
  • Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
  • SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
Check Stock

Netgear Powerline 1000 Adapter Set Of 2 2x pl10

  • 【Convert Non-PoE to PoE】With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE150S.
  • 【High Speed Gigabit Ports】Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port.
  • 【802.3af PoE Compliant 】TL-PoE150S supplies power and data via one single ethernet cable to 802.3af PoE devices and expands network to areas with no power lines or outlets.
  • 【Plug and Play Installation】Easy setup with no software installation or configuration needed.
  • 【Long Range Transmission】Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas.
  • 【Auto Detect Power】With Auto Detect technology, TL-PoE150S determines and delivers the exact power supply to your devices wiith up to 15.4W power output..
Check Stock

TRENDnet 8-Port Gigabit GREENnet PoE+ Switch, TPE-TG81g, 8 x Gigabit PoE+ Ports, Rack Mountable, Up to 30 W Per Port with 110 W Total Power Budget, Ethernet Network Switch, Metal, Lifetime Protection

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, Internal Power Supply..
  • POE POWER & SWITCHING CAPACITY: The 8-Port Gigabit Switch has eight Gigabit PoE+ ports which supply up to 30W of power per port with a 110W PoE Budget and 16Gbps switching capacity. Reduces equipment cost by delivering data and power over existing network cables.
  • FANLESS DESIGN: The fanless design of the unmanaged switch lowers energy consumption and eliminates operating noise..
  • RACK MOUNTABLE: The network switch is rack mountable and comes with a rack mount kit for easy convenient installation..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..
Check Stock

Mikrotik CRS328-24P-4S+RM 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case Dual Boot and PoE output 500W

  • Mikrotik CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
  • PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
  • CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in.
  • The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.
  • It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.
Check Stock

PLUSPOE 2-Pack Wall PoE Injector 48V 24W Power Over Ethernet Adapter 802.3af for Security IP Camera, IP Voip Phones, AP and More,10/100Mbps

  • Simplify installations with a multi-port midspan injector PoE adapter. Our 8 port PoE injector features 8 Data In (LAN) ports with 8 Data + Power Out (PoE) ports. Includes a compatible PoE injector 48V 60W power supply..
  • Supply continuous Power over Ethernet for up to 8 passive 802.3af or 802.3at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification..
  • PoE injector compatible with IEEE 802.3af or at devices. Mode B Negotiation delivers power on pins 4,5(+) / 7,8(-). Passive “Always On” power means all devices receive the same voltage (48v)..
  • Plug and play. This midspan PoE injector is compatible with your 10/100 Mbps network switch or router, delivering Fast Ethernet standards with no loss of signal quality via 8 Data In ports and 8 Data + Power out ports..
  • All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

NOYAFA Advanced Network Cable Tester With PoE& NCV & Lamp For CAT5e/CAT6/CAT6a, Multifunction Wire Tracker Cable Tester For Tracker Underground Telephone Line Finder Home Repair

  • Main Function : Detecting PoE voltage, current, power, PSE standards Power supply modes, Verify RJ45 cables.
  • 1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode.
  • 2. Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP lan cable..
  • 3. Measure cable length accurately , the range is 120m..
  • 4. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • 5. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).
Check Stock

Cudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT

  • 8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
  • IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.
Check Stock

TRENDnet 5-Port Gigabit PoE+ Switch, Camera DIP Switch extends PoE+ 200m (656 ft.), 60W PoE Budget, Black, TPE-TG51g

  • Extend PoE+ signal up to 200m (656 ft.) at 10Mbps.
  • DIP switch supports VLAN port isolation and QoS.
Check Stock

MikroTik Cloud Router Switch Rack-mountable Manageable Switch with Layer 3 Features (CRS317-1G-16S+RM)

  • 11 Ports: Includes 6 (1-6) 802.3af/at POE ports(10/100Mbps), 2 (7-8) BT POE++ ports (1000Mbps), 2 Gb UpLink ports(10/100/1000Mbps) and 1 SFP Uplink port. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc..
  • High POE Power: Comply with IEEE 802.3af/at/bt standard, Maximum support 120W high output power,1-6 port single port MAX output power is 30W, 7-8 port single port MAX output power is 60W, Used for more kind of high-power devices such as PTZ, Wireless bridge, PoE LED etc..
  • Built-in Surge Protection: 6KV lightning protection, 8KV electro-static, surge protection, short-circuit protection, over-temperature protection, over-current protection..
  • PoE Watchdog AI Function: Automatic detection, automatic restart, detects the power receiving port automatically, detected the dead device and restarts the device after power failure..
  • IP65 Waterproof: Industrial housing design, integrated top cover, PC/ABS high polymer alloy material, extraordinary toughness, waterproof indoor and outdoor full-time, make sure the switch can be used in the bad weather..
Check Stock

4 Port in-Wall Gigabit PoE Extender with IEEE 802.3bt Uplink - Power Over Ethernet Switch Wall Plate with Full Passthrough VLAN Computer Network IP Camera Feed Internet Office VoIP

  • 4 PoE+ ports on one network cable run. 60 Watt max PoE+ switch powers up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source..
  • An in-wall PoE passthrough switch opens up opportunities. Our 4 port PoE switch lets you add devices and capacity anywhere on your network, without the cost of adding extra lines and expensive infrastructure..
  • Wall mount PoE switch fits flush to wall boxes for a clean, stylish install. Install this power over ethernet switch into any standard electrical wall box for complete integration into your home or office..
  • Mount the PoE extender in any remote office, dorm room, or hotel room. Functions as a network switch for office VoIP phone systems, multiple live IP camera feeds, and anywhere that needs a little extra power and network capacity..
  • Covered by an industry leading 1-year manufacturers warranty and lifetime technical support with a PoE Texas expert. Please email or call 512 479 0317.
Check Stock