LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case
...clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE ....
Huacomm 8 Port PoE Switch with Full PoE+ Ports Plug-and-Play Desktop for IP Camera Access Points IP Phone Metal Housing Ethernet Extended Unmanaged IEEE 802.3af/at 96W HC1709P
The new and powerful upgrade for HC1709P: Power consumption upgrade from 65W to 96W + Human oriented design of power usage + Build-in power supply..
8 PoE+ Ports plus 1 Uplink Port 10/100Mbps PoE Switch, Supports PoE power up to 30W for each PoE port, 96W for all PoE ports, full IEEE802.3af/at....
Security&Reliable. Smart PoE Power Supply, automatically identification, never destroy the front equipment. One-by-one port start function, avoid....
This PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access points, IP phones, offices, office access control systems, and other....
LIMITED LIFETIME WARRANTY and 24/7 Technical Support..
PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies
Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
TRENDnet 6-Port Fast Ethernet PoE+ Switch, 4 x Fast Ethernet PoE Ports, 2 x Fast Ethernet Ports, 60W PoE Budget, 1.2 Gbps Switch Capacity, Metal, Lifetime Protection, Black, TPE-S50
ETHERNET PORT INTERFACE 4 x Fast Ethernet PoE+ ports and 2 x Fast Ethernet ports.
POE POWER BUDGET & SWITCH CAPACITY: This PoE+ switch supports both PoE (802.3af) and PoE+ (802.3at) devices with a 60 W PoE power budget that delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. The 6-port fast Ethernet PoE+ network switch provides 1.2 Gbps switching capacity to support edge network installations..
COMPACT FANLESS DESIGN With a compact and lightweight rugged metal housing design this desktop switch is well-suited for desktop installations Its fanless design is ideal for quiet environments that require silent operation.
DATA TRANSFER RATE Ethernet 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet 100 Mbps (half duplex) 200 Mbps (full duplex).
OPERATING TEMPERATURE This 6-port fast Ethernet PoE+ network switch is rated with an operating temperature range of 0 – 40 °C (32 - 104 °F).
TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee..
iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps
Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
StarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)
2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.
AVMATRIX VS0605 6CH SDI/HDMI Multi-Format Live Production Video Switcher Mixer with Recorder
AVMATRIX VS0605 6CH SDI/HDMI Multi-Format Video Switcher Multiformat Input:SD, HD,FHD.
The video switcher is an all-in-one 6-channel video switcher that allows video switching, audio mixing, and video recording..
Camera Control:CAM1 and CAM2 buttons are for Camera 1, Camera 2. ZOOM IN and ZOOM OUT to adjust the size of the picture. Press the button, the button LED will be turned on to indicate that the manual mode is enabled. Then the camera can be controlled via the Joystick..
Audio Mixer: CH1 ON / CH2 ON / CH3 ON buttons are for SDI1 / SDI2 / SDI3 / SDI4/ VIDEO5 / VIDEO6 / XLR / RCA / MIC audio source selection. Master for output the mixing audio to program. The audio faders are for adjusting the audio volume..
Audio Mixer CH1 ON / CH2 ON / CH3 ON buttons are for SDI1 / SDI2 / SDI3 / SDI4/ VIDEO5 / VIDEO6 / XLR / RCA / MIC audio source selection. Master for output the mixing audio to program. The audio faders are for adjusting the audio volume..
POE Extender RJ45 4-Port 10/100M IEEE802.3at Power-in to IEEE802.3af Power-Out for Ethernet/PoE Power AP IP Camera IP Telephone and Other Network equipments
A PoE-powered PoE-sourcing ethernet switch. Used for network equipment with PoE signal function, as relay equipment to achieve signal extension. Total....
Applicable Range: A Used with AP, IP camera, IP telephone and the other network equipments in the situation of the lack of power line or far away from....
Network Medium: Cat5 or better UTP cables(less than 120m).
【24 Gigabit PoE+ Ports for Powerful Connectivity】Equipped with 24 PoE+ (802.3af/at) 10/100/1000Mbps RJ45 ports, providing up to 30W per port with a total PoE power budget of 250W for a seamless network experience..
【High-Speed Uplinks & SFP Expansion】Features 2 Gigabit Ethernet Uplink ports and 2 SFP Uplink ports (100/1000 Base-X) for high-speed connections, enhancing overall network performance and flexibility..
【Wide Compatibility with 48V Active PoE】This 48V active PoE switch is designed for compatibility with a broad range of devices, but please note that it is NOT compatible with Ubiquiti devices that require 24V Passive PoE..
【Reliable BV-Tech Premium Series】Trust in the quality and performance of our Made-in-Taiwan, NDAA Compliant PoE Switch for your networking needs..
【100% Satisfaction Guarantee】Our 30-day Money-Back Guarantee and 1-Year Warranty ensure your peace of mind when choosing our premium, Taiwan-made, NDAA Compliant PoE Switch..
