OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black
EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
You can save hundreds of dollars by using this one pilot puller.
VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
This blind hole bearing puller is built to last.
DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
[2 Pack] Mission Automotive Transfer Case Cable Bushing fits Jeep Wrangler JK 2007-2018 and More - Repair Your Jeep Transfer Case Linkage - Replacement 68064273ab Bushing - Easy Installation Bushings
Don't Get Stranded -- If you take your vehicle off-roading, its transfer case cable bushing can weaken over time and break. This will leave you stuck....
Exact Fit For -- The Mission Automotive transfer case shifter linkage bushing fits various Jeep Models. Compatibility includes Jeep Wrangler JK....
Easy Installation -- The Mission Automotive bushing compatible with the Jeep Wrangler transfer case bushing goes on without much effort. First, remove....
Don't Break The Bank -- Buying automotive parts can add up quickly. Get the best value by ordering the Mission Automotive part compatible with select....
2 Pack -- Driving your vehicle causes wear and tear on the transfer case cable bushing. They easily shatter over time. With this pack of 2 Mission....
Door Pin Guides & Door Bushing Removal Tool For Jeep Wrangler JK JKU JL JLU Sports Sahara Freedom Rubicon Unlimited & Gladiator JT 2/4-Door 2007-2021 Stainless Steel Hinge Bolts Guides Liners (17 Pcs)
Great Compatibility — Perfectly fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited & Gladiator JT 2-Door and 4-Door 2007-2021. (NOTE: Door Bushing Removal Tool did not fit TJ).
Superior Material — Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust. The heavy duty integral steel structure bushing removal tool has good rigidity, high precision and a long service life..
Effect — Help you line up the door pins against the hinge and put your doors back easily. Remove your corroded and worn out door hinge liners and replace the factory liners which are prone to rust with the new liners that rust and corrosion resistance..
Easy To Install — Use the door pin guides to align the top cap and lower the door so that the bottom is in place. Tap the door bushing removal tool with a hammer until the OE liners are totally removed..
100% Satisfaction Guarantee — If you're not 100% satisfied with our items, simply return it for a full refund ....
Dorman 38400 Door Hinge Pin And Bushing Kit - 1 Pins And 4 Bushings Compatible with Select Models
Direct replacement - this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution - this pin and bushing are reliable replacements for original components that have failed due to wear.
Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)
【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Dorman 38395 Door Hinge Pin And Bushing Kit - 1 Pin And 2 Bushings Compatible with Select Ford / Mercury Models
Direct replacement - this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution - this pin and bushing are reliable replacements for original components that have failed due to wear.
Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Dorman 38447 Front Door Hinge Pin And Bushing Kit - 2 Pins And 2 Nuts Compatible with Select Jeep Models
Direct replacement - this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution - this pin and bushing are reliable replacements for original components that have failed due to wear.
Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
TP-1934 - Cabinet Hardware Jig with Case - Accurate Drawer Knob Pull Drilling - Drill Template for Professional Hardware Mount Installation - Adjustable Door Tool - Made in USA - True Position Tools
QUICKLY INSTALL KITCHEN HARDWARE LIKE A PRO with the True Position Tools TP-1934 cabinet handle template tool, which is specifically designed to make hole alignment and handle installation a breeze! MADE IN USA.
EASY TO ALIGN EVEN IF YOU HAVE ZERO EXPERIENCE! No need to call costly professionals anymore. Use our adjustable, simple and highly-accurate cabinet knob template tool to install hardware 10x faster and more accurately..
NO MORE RUINED CABINET DOORS OR DRAWERS! Use our accurate hardware installation jig to drill holes and install cabinet or drawer pulls and handles with zero effort. Just set the hardware spacing, adjust the desired location, tighten and drill! Save time and money and get the job done right!.
NO CLAMP NEEDED. REVERSIBLE FOR SPEEDY INSTALLATION! Our precision cabinet hardware jig is designed for use without clamps and is reversible for quick drilling, simply flip the jig over for repeated settings on opposite doors. Marking holes is a thing of the past with our robust drill through design..
PERFECT FOR ALL PROFESSIONAL CABINET MAKERS & DIYERS! Our drawer pull template features replaceable 5mm case hardened steel bushings that make it ideal for heavy duty professional use. Lifetime bushing warranty, free replacement..
