Best Polycom Firmware

TONGVEO Video Conference PTZ Camera 20X USB/HDMI/SDI 1080P for Business Meeting Church Live Streaming Education

  • ✔PTZ CAMERA WITH 20X OPTICAL ZOOM - Our PTZ Camera has 3 video outputs: USB 2.0, HDMI and SDI. It is equipped with a 1/3 inch HD Color CMOS with....
  • ✔SMOOTH AND SILENT PTZ MOVEMENT - Our PTZ camera can rotate 350° horizontally (±175°) and 90° vertically (-35°～+55°). Quickly control camera....
  • ✔MULTIPLE VIDEO OUTPUTS - Plug & Play USB 2.0, and HDMI port are available to connect to TV/monitor, and SDI interface supports remote video....
  • ✔MULTIPLE APPLICATION COMPATIBILITY - Works with most video conferencing apps including Zoom, Skype for Business, polycom, Microsoft Lync, Cisco,....
  • ✔MULTIPLE MOUNTING OPTIONS AND 2-YEAR WARRANTY - Available to install on desk, monitor, wall, tripod, or up-side-down on the ceiling (including a....
Check Stock

TONGVEO Video Conference PTZ Camera 10X USB/HDMI/SDI 1080P for Business Meeting Church Live Streaming Education

  • ✔PTZ CAMERA WITH 10X OPTICAL ZOOM - Our PTZ Camera has 3 video outputs: USB 2.0, HDMI and SDI. It is equipped with a 1/2.9 inch HD Color CMOS with....
  • ✔SMOOTH AND SILENT PTZ MOVEMENT - Our PTZ camera can rotate 350° horizontally (±175°) and 90° vertically (-35°～+55°). Quickly control camera....
  • ✔MULTIPLE VIDEO OUTPUTS - Plug & Play USB 2.0, and HDMI port are available to connect to TV/monitor, and SDI interface supports remote video....
  • ✔MULTIPLE APPLICATION COMPATIBILITY - Works with most video conferencing apps including Zoom, Skype for Business, polycom, Microsoft Lync, Cisco,....
  • ✔MULTIPLE MOUNTING OPTIONS AND 2-YEAR WARRANTY - Available to install on desk, monitor, wall, tripod, or up-side-down on the ceiling (including a....
Check Stock

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

  • ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
  • ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
  • ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
  • ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
  • ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
Check Stock

Ultimate Ears MEGABOOM 3 Portable Bluetooth Wireless Speaker Waterproof Night Black Renewed

  • Remember to update the firmware on your speaker prior to using it!.
Check Stock

Surf Music Unplugged

  • Includes SNES Original Port and USB 2.4 GHz receivers. *Receivers update via Micro-USB (Not Included).
  • Features Additional ZL/ ZR shoulder buttons and Home and Screenshot buttons. Additional macros for versatile gameplay.
  • Compatible with SNES Nintendo Switch Online.
  • For Switch, "Pro Controller Wired Communication" must be enabled before pairing.
  • FIRMWARE UPDATE - Please check and update your controller to the latest firmware before use for best experience..
Check Stock

3DR 500MW Radio Telemetry Kit 915Mhz 915 Kit Air and Groud Data Transmit Module for APM2.6 APM2.8 PX4 Pixhawk

  • Upgraded version: From November 2021, data transmission will be upgraded from 100mw to 500mw. Support OTG of Android Cellphones,and computer OTG.....
  • 3DR telemetry 915mhz set for multiwii setting. PLUG AND PLAY. Pre-configered and tested to 115200 BAUD rate, and all other settings needed.
  • The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range and superior performance....
  • The radio is a 2-way half-duplex wireless communication system with a standard TTL UART interface, based on HopeRF's HM-TRP data link modules, and....
  • The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and radio firmware with configurable....
Check Stock

BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Sim Joystick Calibration - Mode 2 Left Throttle

  • ...RS radio controller. It comes with build-in ELRS 2.4G TX, which can achieve long-range flying with your drones.
  • 【BETAFPV Configurator】This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update.
  • 【Performance】This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz.
  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solv....
Check Stock

BIGTREETECH SKR Pro v1.2 32-bit Motherboard high-Frequency 3D Printer Control Board Support TMC5160 TMC2208 TMC2130 TFT28 TFT32 TFT35 12864LCD ect.

  • Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3....
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled..
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord.....
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem..
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical....
Check Stock

Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer

  • Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If....
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled..
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord.....
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem..
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical....
Check Stock

UNIDEN BCD536HP Bearcat Digital Base/Mobile Scanner

  • The TRX-2 detects and masks digital voice audio, and decodes RadioID/TalkgroupID data embedded in voice packets..
  • The Complete Radio Reference USA and Canada Database On Micro SD Card.
  • Upgradeable CPU Firmware, DSP Firmware and Library.
  • Uses Standard Micro SD Card, Supports Cards Up to 32GB.
Check Stock