West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.
West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.
GANSSIA 1 Inch White Buttons 25mm Flatback Resin Button for Garment Sewing DIY Craft Scrapbooking Pack of 50PCS
PACKAGE INCLUDES: 50 pieces of resin buttons, the diameter of this pack of buttons 1" (25mm) (The true product size will have an error of ±0.5mm).
QUALITY BUTTONS: these buttons are made of resin, the surface is smooth, waterproof and durable, can be attached using glue, tape, thread, ribbon and much more..
WIDE APPLICATIONS: They can be applied as replacement for kid's shirt, suitable for fine motor activities, button sorting game with kids, crafts making, clothes sewing and DIY projects, scrapbook decoration, etc. When your DIY craft by buttons being sent as a gift, your friend will love and admire your amazing idea..
Packaged in the Bead and Button Company header card packaging, great for a gift..
Note: small items, not suitable for children under 3 years old..
Resin Heart Tealight Candles Holders Mold Set, 2pc Heart Shape Candlestick Silicone Molds for Epoxy Casting DIY Wedding Party Home Decor Unique Valentine’s Day Gift Wedding Party Home Table Decoration
...ty crystal tealight and candle holder for different occasions and festival!.
High-Quality Silicone Molds: These heart-shaped silicone molds are made of high-quality silicone with advanced technology, which is flexible and durable. Compatible with most resins or other casting materials, such as epoxy resin, UV resin, polyester resin, and the surface of finished products is very smooth, glossy and no micro-bubbles, and the wooden support help you easily make a perfect candle holder without deformation.The inside of the mold is smooth and easy to demold.
Romantic Warm Gift :Express Your Love to express your special feeling to your best friend,mom,wife.Heart candlestick epoxy casting silicone molds can be a great DIY decoration or gift.
You can DIY elegant and unique resin ornaments which can add sophistication to your home decor and brightened up your life. Heart ornaments silicone mold can be a great present for Engagement, Wedding, Anniversary, Bridal Showers, Valentine’s Day, Birthdays, Mother’s Day, Christmas, or other special occasions.
Widely DIY Application:These candle holder molds are suitable for most resins or other casting materials such as gypsum,epoxy resin, cement concrete, etc. You can add dried glitters, flower,stone, rhinestones, seq....
LET'S RESIN Large Sphere Resin Molds,2.7&3&3.5 inch 3D Resin Ball Molds, Three Sizes Clear Round Silicone Molds for Resin Art, Epoxy Resin, Jewelry Making, Bath Bomb, Candle Wax, Soap DIY
...sy to disassemble. One-piece design, the resin is directly poured into the molds, the demolding is easier, and no need to polish the two-part mold interface. Not easy to deform, smooth surface. Can be used multiple times, durable..
Strong Compatibility: The round silicone resin molds are compatible with epoxy resin, polyester resin, clay, and other materials. It can also be matched with dried flowers, cute animals, and natural elements to make beautiful crystal lamp balls. There are more creative possibilities..
The Best Choice for DIY molds: They are suitable for resin art, gifts, bath bombs, home decoration, etc. It can also be made into beautiful gifts for family and friends..
Quality Service: LET'S RESIN attaches great importance to consumer experience and will continue to update and optimize products. If you encounter any problems when using LET'S RESIN products, please contact us in time. We will provide good service to ensure your shopping experience..
Resin Molds for Epoxy Resin Pendant Earring Jewelry Making, Silicone Casting Molds for Creating Art Dropping Glue Handmade Craft Crystal Epoxy DIY Supplies, 3Pcs
Jewelry making kits include 10 geometric earring molds.
Make varied styles of dangle or drop earring such as statement, fashion, boho style, minimalist etc.
Design your unique jewelry by adding embellishment, mini pearls, glitters, dried flowers and more..
Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more.
Transparent soft mold, you can check the buttom when process project. Easy to demold, gloss finish. Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit.
West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistant solid with excellent bonding and barrier coating properties.
West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistant solid with excellent bonding and barrier coating properties.
