Best Portable Cold Cut Saws

Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw Blue

  • cuts metal with minimal heat or sparks and doesn't require coolant.
  • 1800 watt / 15 amp motor with high torque gearbox.
  • reduces motor load and improves steel cutting performance.
  • faster cutting & long blade life averages 1000 cuts in 2 in x 2 in mild steel.
  • cuts metal with minimal heat and burrs, leaving a workable finish.
Check Stock

CMT 256.050.10 ITK XTreme Industrial Combination Saw Blade, 10-Inch x 50 Teeth 4 ATB + 1 FLAT Grind with 5/8-Inch Bore

  • For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars

  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of....
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into....
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set....
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors....
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your....
Check Stock

Barb Drill Bit, Multiple Sizes Tapered Hole Drilling with Center Punch for Metal Plastic Wood Plates

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

Freud D0724PX Diablo ATB Framing and Ripping Carbide Circular Saw Blade with 5/8-Inch Arbor, 2-Pack

  • 7-1/4"x24 tooth framing and construction blade.
  • Blades have laser cut bodies, with perma-shield coating to prevent corrosion, and gumming. Will fit most 7-1/4" circular saws and worm drive saws..
Check Stock

Luomorgo 75mm/3 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 3 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience..
Check Stock

Luomorgo 100mm/4" Hole Saw, 1.4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 4 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a satisfied shopping experience..
Check Stock

Mercer Abrasives 718121 40-Tooth ATB Carbide Wood Cutting Blade with 8-1/2-Inch Diameter and 5/8-Inch Arbor, Fine Finish

  • One 8-1/2" blade with 5/8" arbor for cutting wood.
  • ATB Tooth configuration. Thin kerf for fast, clean and accurate cutting.
  • Use on Slide Miter Saws and Miter Saws. Max RPMs 9,000.
  • Noise reduction anti-vibration vents reduce noise and vibration while stabilizing the blade producing a smoother, cleaner cut and longer blade life.
  • Heat expansion slots allow the blade to expand due to heat build up while keeping the cut accurate and controlled.
Check Stock

HAUTMEC Professional Bi-Metal Steel Mini/Junior Hacksaw Blades 6 inch, High Speed Steel Grounded Medium Teeth, Pack of 10, HT0150-CT

  • Four ATB teeth and one raker with deep gullets allow for deeper cuts and improved chip-flow.
  • For cross cutting and ripping soft and hardwoods, plywood, and particleboard.
  • On table saws, sliding table saws and cut-off saws.
Check Stock