Discrete R2R DAC: R-2R ladder DAC converts the digital signal to analog signal by switching resistors' array, it provides a more natural sound. However, this architecture needs precision resistors and deep development to archieve fine performance..
Native 1Bit DAC:support DSD 512 (via USB) and DSD 1024 (via IIS). The DSD streamdecoded by the independent 1 bit convertor without DSD to PCM converting.*Volume is fixed under this mode..
Clock synthesization: Replace the input signal' s clock with precision oscillators (local or external). Interference from the input source' s clock is avoided. Function off: IIs, AES, COAX, OPT, BT.
PCM NOS, 1 Bit Function on: USB & LAN K2, ultra-low noise clock synthesizer: provides precision clock from local oscillators or external clock in..
LPF is specifically designed for the D/A converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete....
Discrete R2R DAC: R-2R ladder DAC converts the digital signal to analog signal by switching resistors' array, it provides a more natural sound. However, this architecture needs precision resistors and deep development to archieve fine performance..
Native 1Bit DAC:support DSD 512 (via USB) and DSD 1024 (via IIS). The DSD streamdecoded by the independent 1 bit convertor without DSD to PCM converting.*Volume is fixed under this mode..
Clock synthesization: Replace the input signal' s clock with precision oscillators (local or external). Interference from the input source' s clock is avoided. Function off: IIs, AES, COAX, OPT, BT.
PCM NOS, 1 Bit Function on: USB & LAN K2, ultra-low noise clock synthesizer: provides precision clock from local oscillators or external clock in..
LPF is specifically designed for the D/A converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete....
Monolith Desktop Headphone Amplifier and DAC with THX AAA Technology Dual AKM 4493 DACs & Dual AAA-788 Modules
The worlds most linear amp technology: the THX achromatic audio amplifire (THX AAA) ensures the ultimate no-compromise Headphone audio experience.
True balanced operation: Each THX stereo amp module operates in a bridged configuration to maximize output power for each channel, each DAC operates....
Dual AKM 4493 DACs: new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a direct stream digital input of 2. 8/5. 6/11. 2....
Balanced & single ended Headphone output: Compatible with all headphones and items.
Tailor your sound: Use the powerful digital tools to tailor the sound to your personal preference. Does your headphone have a little sibilance? Set a....
Facmogu 4 PCS Stainless Steel Speaker Spike Shockproof 28-32mm Adjustable Isolation Feet Stand Cone Pad for Turntable Amplifier CD DAC Recorder with Adhesive
Material: 304 Stainless Steel, CNC machined. The weight bearing capability for 4 spikes is about 440 lbs (200kg)..
With 3M adhesive, it's easy to stick spikes to chassis' without drill holes..
Suitable for speakers, CD players, DAC, turntable, amplifier, DAC Recorder etc..
Height: 28mm - 32mm (adjustable), Diameter: 28mm, Mounting Screw hole: 8mm. Please make sure if the specification you need..
FiiO E10K-Type-C USB DAC and Headphone Amplifier Bundle with USB Wall Plug and Cables (4 Items)
Bundle Includes: FiiO E10K-Type-C USB DAC and Headphone Amplifier, Knox Gear Aluminum Headphone Stand for Desk with Solid Base Mount (Black), Panasonic RP-HD305 Premium Hi-Res Wireless Bluetooth Over The Ear Headphones (Black), Ubio Labs Silhouette 6,000mAh Portable Power Bank (Black), Kratos Power 20W USB Type-C PD Power Adapter, Knox Gear Hard EVA Travel Case for Sony WF-1000XM3 Wireless Earbuds (Black), Griffin USB-C to MFI Charge/Sync Lightning Cable (6-Feet, White) and Extension Cable.
Impeccable XMOS Decoding: The E10K-TC comes with the flagship XMOS XUF208 for better USB decoding. Compared to the original E10K, the USB Audio class has been upgraded to 2.0, and PCM is now supported up to 32 bit/384kHz sampling rates to better capture the details in your music.
Quality Chips to Delight your Ears: The DAC is the PCM5102, with improvements to the flatness and delays of the internal digital filter meaning better sound quality and less audio delay. A high current amp circuit ensures good output power with great transient response.
2 Gain Levels and BASS Boost: The E10K-TC comes with high/low gain adjustment as well as a bass boost. High gain is for higher impedance headphones that may need the extra volume, while the bass boost satisfies different list....
TempoTec V6 Hi-Res Digital Audio Music Player,HiFi Digital Audio Player DAP,Portable high Resolution Audio Player, Lossless DSD MQA, Dual ak4493SEQ, Two Way Bluetooth,4500mAh Battery, 4.4mm/3.5mm
♫(Dual DAC HiFi audio player) V6 portable android music player is equipped with 2 high performance AK4493SEQ dac chips, supports up to PCM 32bit/768kHz and native DSD512..
♫(High output power) V6 has output power [email protected]Ω/4.4 BAL PO,[email protected]Ω/3.5PO..
♫(Operating system) Android system with SRC bypass architecture on V6, you can download and install other music streaming apps such as Tidal,Spotify, Apple Music and enjoy music in lossless quality..
♫(WiFi and Bluetooth) V6 supports High resolution Bluetooth transmission protocol，LDAC,APTX,APTXHD,AAC,SBC. and 5GHz and 2.4GHz wifi..
♫(Multiple output ports) 4.4 BAL PO+ 3.5PO for earphones.
4.4 BAL LO+3.5 LP are line out for speakers.
USB-C on V6 is OTG port, can work as USB DAC(input)/ or connect with other USB DAC as a audio source.
Topping A90 Headphone Amplifier 4.4mm XLR Desktop HiFi Full Balanced Amplifier Pre-Amplifier Black
Full balanced + SE headphone output---A90 has three output headphone jacks of 4-pin-XLR，4.4 balanced and 6.35 SE to meet different usages..
A90 is provided with a wide range of adaptation to headphones.---The SE 25Vpp / balanced 49Vpp high output voltage along with high output current & less than 0.1 Ohm output impedance,.
A90 is equipped with three gain settings of -9.5dB/ 0dB / 9.5dB for SE and -35dB / 6.0dB / 15.5dB for balanced. The noise of merely 0. 2uVrms makes A90 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full sized over-ears..
It's a great companion of active monitors stacked with D90 DAC when A90 work as pre-amp application..
USB C to 3.5mm Headphone Adapter Type C 60W Fast Charge USB C to Audio Jack Extender Earphone Aux Converter for iPad Pro 2020/Air4/mini6 Google Pixel 6/5/4/3/2 XL,Samsung Galaxy S21/S20/Ultra/Note 20
✅【Wide Compatibility】This USB C to 3.5mm Headphone Adapter is Work for iPad Pro 2020 2018/Air4/mini6 Galaxy Note 10/10+S21 5G/S21 Plus 5G/S21....
✅【USB C to Audio Jack Extender】 Headphone Adapter Aux Converter has a built-in DAC chip and supports 60W PD fast charging. Easy remote control....
✅【Hi-Res DAC Chip】Built-in advanced DAC chip, high resolution support DAC up to 384khz-32bit, others are 16bit/48Khz. Can guarantee the....
✅【Type C 60W Fast Charge Output】USB C to 3.5mm Headphone Adapter support charge and play audio/phone at the same time.Aux Converter for iPad....
✅【Earphone Aux Converter】Lightweight and durable, compact and portable.This ipad pro headphone adapter uses sleek anodized aluminium,....
The Ikko ITM05 is an ultra-portable balanced DAC and headphone amplifier combo, integrating high-quality components in an extremely compact and lightweight package. It will thus advantageously accompany your smartphone to offer you the best sound reproduction, wherever you are. Practical, it fits easily in a pocket or bag..
Ikko designed its ITM05 to be a compact format that fits in a pocket, but made no concessions to the selected components and architecture to ensure a high level of performance. Thus, the symmetric DIGITAL/analog conversion level comes with a pair of Cirrus Logic CS43198 DAC chips, each of which manages one channel, ensuring high sound accuracy while greatly limiting power consumption..
ITM05 has a strong parameter base with 0.0008% THD and 122dB SNR. It is also capable of reading high resolution files up to PCM 32bit 384kHz and DSD256..
The ITM05 offers full compatibility with your favorite playback devices. The input is on a USB-C or Lightning port and the output is on an unbalanced 3.5mm jack or 2.5mm balanced jack connector. It can also accompany an Android or iOS smartphone, a computer running Windows or Mac OS and will connect just as well to a balanced headset as to classic headphones..
HiBy R3 Pro Saber, Hi-Res Music Player, Hi-Fi Lossless Audio Player, mp3 Player with Bluetooth and WiFi/Tidal&Qobuz Streaming/Dual ES9218P Chips/2.5mm Balanced Output/Full Touch Screen (Gray)
【Dual Dac ES9218P professional music player】HiBy R3 Pro Saber is the third generation hifi music player launched by HiBy Music. From a single DAC chip decoding to independent decoding of left and right channels, the player avoids power noise and crosstalk between components to a certain extent, and also further enhances the fidelity of the audio and the power of the output port, so that the player has obtained better sound quality..
【Hi-Res Music Player】DAC chips ES9218P, The core of SABRE DAC technology, with HyperStream ll modulator, supports native hardware DSD256 decoding, PCM playback at up to 32bit/384kHz. This music player brings out the edge in aggressive genres like metal, electro and ACG,Has obtained Hi-Res Audio (High Resolution Audio) & Hi-Res Wireless dual Accreditation..
【Operating system dedicated to music player】HiByOS is HiBy Music’s platform product. it is continually updated for the latest audio formats and features, The operation is smoother and the interface is more user-friendly. Using the HiByLink function, wireless remote control can be realized, and the mobile phone can control device playback, volume adjustment, and playli....
