20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module
How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)
Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
100A Battery Monitor, Waterproof with Hall Sensor, 0-500V Battery Voltage Meter,Detection Capacity Tester,for DC 12V/24V/36V/48V/96V/108V Li-ion/LiFePO4/AGM/Gel Battery in Golf Cart/RV/Solar System
Multifunctional Tester: multimeter panel is available to measure percentage and AH of remaining capacity, DC positive and negative bidirectional accumulated electric energy. Voltage measurement range is DC 0-500V, current measurement range is 0-100A/500A.
Wireless connection:Wireless connection between measurement module and display,The maximum distance is less than 10 meters without obstruction.
Easier to DIY :with hall sensor, No necessary to install with screws.just wire the cable through the hall sensor..
Easy To read:2.4 Inch Big Color LCD Display multiple electronic parameters, including Voltage, Current, Consumed Power, Battery Capacity,Temperature,and battery degradation rate with a customized brightness high-definition Backlight Display..
Fit for all battery:Compatible with various battery types, including Lead Acid (AGM, GEL), Lithium Iron Phosphate, Lithium-ion,LiFePO4, Nickel-metal hybrid..
DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply
output voltage range is DC 0.5-30V, can be arbitrary adjustable.
output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A.
max output power is 35W, if enhance dissipation, it can reach 50W.
LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default.
Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off.
Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection.
used as a high-power LED constant current driver module.
DIY a solar power controller, Battery Charging.
Output ripple is small and πfilter is available.Thick heat sink .Buck-boost Integrated.
DEVMO DP20V2A Constant Voltage Constant Current Programmable Control Step-Down Supply Power Module
The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one..
Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A..
The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extrac.
Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage wi....
Pomelotree LED Window Lights LED Module Lights Waterproof Storefront Lights Business Decorative Lights 12V 5050 LED Lights for Advertising LED Signs Business Store Light 100FT RGB (10 Packs)
... Self-Adhesive tape on the back of each module, which is convenient for you to install. There are sm-4p connectors on the end of each strand of LED module light. It will be much easier for you to connect the lights. Just plug. No need to crimp male female connectors any more. You should pay special attention to the positive and negative poles of the connectors to avoid short circuit..
【Type】- 5050 SMD module, 12V DC input voltage. With ABS plastic material, Waterproof led window lights can work in -20~60℃. Besides, the color of the plastic will not gradually become yellow after long-term using. You can cut it each led into the length you want, DIY your own LOGO or Lighted Store Signs..
【Energy-saving】- Low power consumption, high energy efficient. The business decorative window lights can make your signs attractive with less cost..
【Widely application】- The Storefront Lights can widely used in store, Restaurant, Coffee, Bar, Bank, Airport, Railway, public advertise and notice .Channel Letters Back lighting, Advertisement Signs, and Signage letters..
