Best Potentiometer For Arduino

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

  • 1. Using this Ethernet shield, your for Arduino board can be used to connect to the Internet and can be used as a server or client..
  • 2. This Arduino Ethernet shield based on Wiznet W5100 Ethernet chip provides you with a way to easily get Arduino Online, because it is directly supported by the official Arduino Ethernet library..
  • 3. It adds a micro-SD card slot, which can be used to store files provided through the network..
  • It is compatible with Arduino Duemilanove (168 or 328), Uno and Mega (1280/2560) and can be accessed using the SD library..
  • 4. Wiznet W5100 provides a network (IP) stack that can support both TCP and UDP..
Check Stock

Guyker 2Pcs Guitar Potentiometer Control Knobs for 6mm(0.24”) Dia. Shaft Pots - Knurled Volume and Audio Switch Knob Replacement for Electric Guitar or Precision Bass - Brass, CNC Machined (Golden)

  • The Inner hollow potentiometer shaft diameter is approx. 6 mm (0.24 inch). Outside diameter: approx. 21 mm (0.83 inch).
  • Total height: approx. 14.5 mm (0.57 inch)..
  • Two high-quality 6mm potentiometer knobs - solid brass - CNC machined. Durable and long-lasting use..
  • Brass knobs are for sound equipments or rotary potentiometer, for protection and easy control. The knobs have a knurled finish around their circumference..
  • Designed to fit most Tele, LP, Strat style electric guitar or precision bass instruments..
  • 2 Pcs rotary control CNC machined knobs..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

Feedback Control

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

Feedback Control

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

Taiss 2pcs 3590S Rotary Potentiometer 10k ohm Potentiometer 10-Turn Wire Wound Precision, Precision Multi Turn Wirewound Potentiometer+2pcs A03 knob (3590S-2-103L 10k ohm)

  • Shaft Diameter : 6.35 x 10mm/ 0. 25″ x 0. 4″(D*l).
  • Body Size(No Include Shaft) : 22 x 19mm/ 0.9″ x 0.7″ (D*H).
  • package content : 2 x Potentiometer + 2 x A03 knob.
Check Stock

Feedback Control Model

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

KEYESTUDIO Multi-Purpose Shield V1 with Buzzer LED Temp Light IR Receiver for Arduino Controller R3 and MEGA2560

  • 【2 in 1 Robot Kit and Electronics Kit】-This tank robot car kit is compatible with Arduino and Mixly ((block programming platform) , ideal for Arduino beginners and professionals to learn robotics, electronics and programming.Teenagers or adults can learn coding from Scratch to Arduino after assembly and get a lot of fun of making..
  • 【Automatically Drive/Motion Control】-Keyestudio robot kit has many excellent functions, detecting, avoiding and following obstacles.
  • using 8X16 LED panel to display the movement status. You can also use infrared remote control and Bluetooth APP to control it (support iOS and Android).Have fun in the process of learning Arduino..
  • 【Simple Assembly】-With a detailed tutorial for assembling it,and all parts are named and organization. Four cartoon animal heads have been added to the kit so that you can install them on the ultrasound module,assemble with your child, it will be a wonderful experience!.
  • 【Project-Based Tutorials for Coding】-This programmable robot supports Arduino IDE.15 detailed online projects, from simple to complex,easy to learn coding, robotics and electronics through games. Stimulate your creativity through hands-on experience..
  • 【KEYESTUDIO Technical Support】About this ....
Check Stock

Arduino Nano [A000005]

  • The Arduino Nano is one of the smallest Arduino boards available on the market.
  • Tiny form factor, complete, and breadboard-friendly board based on the ATmega328.
  • Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.
Check Stock