UCTRONICS for Raspberry Pi 4 Rerouting Board with POE Functionality, OLED Display, Power Switch and SD Adapter Board
You Will Be Getting: 1pcs rerouting board with PoE function, 1 pcs power switch, 1 pcs OLED display, 1 pcs SD card adapter, 1pcs screen sticker, and 1 pack of screws..
Power Over Ethernet HAT for Raspberry Pi 4: This rerouting board with PoE functionality Support PoE Network and can be used with UCTRONICS ultimate 1U rack (ASIN: B091GGQDL2)..
Re-locate: This RPi 4 rerouting board makes all IO ports on one side, easy to connect the cables and access the SD card, improve the cable management..
Simple to Turn On & Off: This kit includes an easy-to-use on/off switch that allows you to do a safe shutdown without plugging the power cable..
Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device
VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
DORHEA 5PCS ESP32 ESP-32S WiFi Development Board Unassembled NodeMCU-32S Microcontroller Processor Integrated Chip CP2102 Compatible with IDE
Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board..
Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with Arduino IDE..
ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold..
SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω
The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64
Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
Installation Video refer to Geekworm WiKi search X820.
Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..
Pedal Board,With Completely Isolated Power Supply ,19*5 Inch 1.8 LB Aluminium Alloy Guitar Pedalboard, Included Carrying Bag , Pedal Cable,Charger,40*1.2 Inch Self Adhesive Hook Loop Tape,Cable Ties
ISOLATED POWER SUPPLY:The pedal board is equipped with a completely isolated power supply, which is more convenient to use, eliminating the trouble of carrying an additional power supply,Just need to connect the pedalboard and pedals..
INDEPENDENT SHORT CIRCUIT PROTECTION:includes 7 ways 9V 200mA, 1 way 12V 200mA, 1 way 18V 200mA, 1 way USB 5V 500mA.One output is short-circuited, other outputs can still work.The guitar pedals board power supply has a noise reduction function and direct current increases the stability during use..
ALUMINIUM ALLOY MATERIAL:High-strength aluminum alloy integrated die-casting guitar effects pedal board,which is solid to hold and protect the pedals nicely and durable to use..
PERFECT DETAILS DESIGN:Slight incline design more comfortable for you to step pedals on the board and the frosted surface offers no worries for scratches.Rubber feet make the pedal is quite stable..
ALL IN SUITE ACCESSORIES:The whole piece of customized hook surface velcro and professional grade adhesive backed hook-and-loop for securing pedals. Coming with pedalboard carrying bag , guitar pedal cable,Charger,40*1.2 Inch self adhesive hook loop tape,cable ties.
...to box folds into itself and can be carrying storage bag in which put adapter and other objects.
Flexible shooting AngleMultiple opening and closing ways enable camera to choose any photo shooting position. Professional particulate silver film reflective fabric inside diffuses light evenly and avoid vignette..
Safety Power AdapterBrightness adjusting rotary knob adjusts brightness easily without extra setting. Aluminum shell light plate has good heat dissipation and high life expectancy. Attached diffuser cloth and 4 PVC backgrounds( black,white, gray, orange) are easy and convenient to set studio scene and save PS processing.
Package & warrantyPackage List: 1XLED shooting tent kit. 1XLED power adapter inside the mesh pocket. 1X diffuser cloth. 4X PVC background panel(black, white,gray, orange). Instruction and user manual can be downloaded in Product information -Technical Specification. ESDDI provides 12-month warrantyDescriptionESDDI light tent, foldable design, very easy to storage, carry and open..
120 LED light is soft and even, save photo processing time..
ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection. New Version
ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
