Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module
FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Diymore 2pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module 20v to 12v Step Down
This step-down voltage module with a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current..
It is designed with 75V/80A large current dual MOS tube. Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output..
The efficiency can be up to 96%, measured at 20A, converting 24V to 12V. Wiring is convenient with these large current 30A screw terminals..
The buck module has 2 heat sink that could enhance heat dissipation, extending service life..
When there is a big difference between input and output voltage, please decrease power and current..
DROK 12v to 5v Buck Converter, LM2596 Adjustable DC Voltage Regulator 4-40V 24V Step-Down to 1.23-37V 12V Volt Reducer Board 3A Power Supply Transformer Module
Parameters: DROK buck converter input voltage range is DC 4-40V, adjustable output voltage range is DC 1.23-37V, max output current is 3A, conversion rate can up to 92%..
High Precision Potentiometer: the buck circuit adopts imported BI potentiometer, with high resolution, sensitivity, reliability..
Output Indicator: the volt transformer board is with a indicator light, which is green and the display is bright, clearly visible and not glare..
Safe Protection: the step down power supply module is designed with reverse connection protection, over current protection, overheat protection, short circuit protection..
Note: the dc-dc buck converter can work stably at 3A indoor (Test condition temperature is 29 ℃, and humidity is 50%). If it’s for long time work, it is recommended adding heat sink..
New Version AC to DC Converter, EAGWELL SMPS 110V AC to 12V DC Converter Power Supply Adjustable Switch Power Supply Transformer Max 50A 600W
【NEW VERSION AC TO DC CONVERTER】New Upgrade 600w converter build with Imported Aluminum alloy shell ,Built-in wire integrated design, Dual power connection methods, Very convenient for 12V devices with clamps, Eagwell's 50 amp power supply come with ul power cord ,12v converter with switch ,wire lugs,metal clip and screw.Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design of 12v dc power converter..
【ADJUSTABLE VOLTAGE】12 Volt Power Supply is AC to DC 12V Converter.Input voltage Support AC 110V-120V / 220V-240V , Output Range (12V 1A-5A, 12W-60W ) or (12V 10A-50A 120W-600W) ,voltage input will adjust automatically to SMPS Model ,Output current Mainly depends on your device, such as 10A 120W, 25A 300W, 40A 480W, Max current up to 50A,Power 600W..
【HOW TO CHOOSE】The peak power is 50A,600W. It does not mean 12v power supply can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..
Cablecc USB 3.0 to SATA 22pin 2.5 Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD Adapter Converter
USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF and mSATA SSD Adapter Converter.
The item included one cable and one PCBA..
Build in Mini PCI-e 52pin Female connector.
Build in M.2 (NGFF) B key Female connector.
Insert both M.2 and mSATA SSD on the PCBA,M.2 SSD is the first priority.mSATA won't work. Support SATA Reversion 3.2.
PCI Express M.2 Spec.Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec.1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode)/2KV Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket..
USB to CAN Converter Module for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Jetson Nano/Tinker Board and Any Single Board Computer Support Windows Linux and Mac OS
The USB to CAN Converter Module compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop..
The USB CAN Module support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel), Ubuntu..
Plug and Play USB CAN device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification..
Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins.120 Ohm resistor selectable jumper feature..
Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os(Big Sur)..
Tackston RCA to HDMI Converter, 1080P RCA Composite AV to HDMI Video Converter Cable Compatible with Wii NES N64 PS2 Xbox 360 Sega Genesis VHS VCR DVD Players to Modern TV
RCA to HDMI Converter - Converts RCA composite input to HDMI 720P/1080p (60Hz) output. The analog to digital conversion in this module employs 10 bits maximal 162MSPS sampling, which automatically detects and converts the composite signal to 1080p (60Hz) output, you can get all your old systems which output with RCA displayed onto TV/projector/monitor which only has HDMI!.
Plug and Play - Comes with free RCA coupler, no need to purchase additional HDMI cable and RCA cables, no need to install drivers. Please plug the USB power cord to 5V USB Power source when in use..
Wide Compatibility: Support source formats of PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N standard TV. Advanced signal processing with great precision, colors, resolutions..
New Life to Old RCA Output Devices - Widely applied to PS2, STB, VHS, VCR, DVD Players and other devices with standard composite AV output..
Unconditional 12-Month Warranty: Fast and easy-to-reach support solves problems within 24h. Any quality issue with this AV to HDMI converter, please contact us directly to get money back or free replacement, no need to return..
USB A Male to 12V Car Cigarette Lighter Socket Female Power Converter Cable,Fit for Driving Recorder, Electronic Dog, Car Charger and Other Automotive Electronic Equipment (1Ft/30cm)
【Product Introduction】Length：30cm/0.98ft，USB Input: 5V 2A, Cigarette Lighter Socket Output: 12V 8W Max, It is only to power small electronic devices or charge a cell phone(It's not support some high power electric device,such as tire inflator, car cleaner, car refrigerator etc).
【Multiple Intelligent Safety Protection】Boost module comes with over-voltage, short circuit and other multiple protection. Omni-directional protection of power supply equipment and electrical equipment safety..
【USB Port Power Converter】 Convert power from USB port to 12V car cigarette lighter socket.
【Convenience】Easy to power on your car electronic equipments by extra power(such like a power bank)，Easy to enable Parking Monitoring feature of your Car Dash Cam, don't worry to run out the battery of your car any more..
【Widely applicable】Fit for Driving recorder, electronic dog, car charger and other automotive electronic equipment.
