Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
CR Magnetics CR5211-100 DC Hall Effect Current Transducer with Single Element, DC, 003e=2K Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, +/-10 VDC Output Range
Output signal DC: 0-5V / 0-10V /4-20mA three forms are available. The outer casing is made of self-extinguishing material, safe and durable..
The measured current AC: 0-10A / 20A / 50A can be selected. Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions..
Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output. It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
Through-heart structure design, isolation withstand voltage up to 2000V AC. It is suitable for various applications requiring current and voltage conversion..
Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement. It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Monosaudio 4Pcs 40x20mm Speaker Isolation Feet Speaker Spike Pads with Non-Slip Rubber Rings for Audio,Speakers, Subwoofers, Home Theater, Turntable DAC Feet Pad (Black Color)
【Material】Monosaudio isolation feet made of Aluminum,speaker isolation feet padwith removable Non-slip Rubber Ring,with High Hardness,High Density,low harmonic vibration point and high damping.Each speaker feet can support 100kg/220lb,so one speaker feet pads set can support around 400kg/880lb.Middle Hole:4.5mm(0.17inch).
【Applicable objects】Subwoofer feet,audio equipment feet,amplifier feet,speaker feet,turntable isolation feet pads,CD/DAC/AMP/DVD players&cassettes deck,recorders,amplifier feet,home audio riser pads,isolating speakers,subwoofer isolation feet,pc case feet,audio isolation feet and Other Audio Equipment..
【Reduct Vibration】Using Monosaudio isolation feet for audio can suspend acoustic feedback from your speakers or sub-woofer isolation for vibration.Subwoofer feet offer an effective solution for optimizing the true sound of stereo equipment.Subwoofer feet isolation effectively reduce vibration for all sensitive equipment.The music will be more focused with less noise..
【CNC Machined】Monosaudio turntable feet no need to make holes and no need to use double-sided adhesive,turntable isolation feet can absorbing the harmful vibration from the supporting surface and internal reflection,eliminate the pollution between the groun....
SVS PB-1000 Pro Ported 12-Inch Subwoofer Bundle with SVS SoundPath Subwoofer Isolation System (4-Pack) - Black Ash
This bundle includes (1) SVS PB-1000 Pro Ported 12-Inch Subwoofer and (1) SVS SoundPath Subwoofer Isolation System (4-Pack)..
325 Watts RMS and 820+ Watts Peak Power Sledge STA-325D Amplifier combines massive high current output of discrete MOSFETs with Class D efficiency. Boasting vanishingly low distortion, the unique design unleashes nearly limitless on-demand power while maintaining precise driver control..
High-Excursion 12-inch SVS Subwoofer Driver features dual ferrite magnet motor assembly with long-throw parabolic surround for extreme excursion that delivers massive output with finesse and accuracy, even at the most intense listening levels..
50MHz Analog Devices Audio DSP renders pinpoint accurate frequency response through advanced in-room tuning and powerful controls, while letting the subwoofer take control of a space with room-filling bass..
Isolation System: Affordable and discreet alternative to platforms and risers. - Works with any brand subwoofer which accepts screw-in feet. - Fewer complaints from house occupants and neighbors in apartments and townhouses. - Cleaner and tighter sounding bass with less floor boom and vibration. - Less buzz/rattle from objects in the room..
Nuer Car Taxi Isolation Film Plastic, 78.74 x 55.1inch PE Transparent Anti-Fog Full Surround Protective Car Shield Plastic Dividers for Cars
Transparent reusable plastic car taxi isolation film: This transparent car isolation film is made of light PE material, transparent material will not block the line of sight, safe, Anti-fog. Just act as Transparent Isolation Wall for Driver and Passenger. Set included 78.74 x 55.1inch taxi isolation film, 2 x Velcro, 40 x Reinforced needle beads.
Easy to use and install: Adopted self-adhesive design. Sticky hook and loop can ensure easy installation and removal without damaging the roof. Easy bonding. This taxi car protective isolation film comes with two high-adhesive velcro tapes and reinforced needle beads that will not fall and loose easily. The durable car taxi plastic film will not be damaged when it is torn open. Come with scissors, you can tailor the size according to your needs.
Materials: The PE taxi isolation film is non-toxic , , strong and durable. Products can be reused. But remember to disinfect after each use. It's great. After installing it, you can build a safe space for yourself, and it's transparent, super reliable, doesn't affect sight.
Safe and full surround protection: The front and rear spaces of the car are divided into separate spaces. Block isolation and divide the space, So as to improve the safety of both sides. To form effe....
SVS SB-1000 Pro Sealed 12-Inch Subwoofer Bundle with SVS SoundPath Subwoofer Isolation System 4-Pack - Black Ash
This bundle includes (1) SVS SB-1000 Pro Sealed 12-Inch Subwoofer and (1) SVS SoundPath Subwoofer Isolation System (4-Pack)..
325 Watts RMS and 820+ Watts Peak Power Sledge STA-325D Amplifier combines massive high current output of discrete MOSFETs with Class D efficiency.....
High-Excursion 12-inch SVS Subwoofer Driver features dual ferrite magnet motor assembly with long-throw parabolic surround for extreme excursion that....
50MHz Analog Devices Audio DSP renders pinpoint accurate frequency response through advanced in-room tuning and powerful controls, while letting the....
Isolation System: Affordable and discreet alternative to platforms and risers. - Works with any brand subwoofer which accepts screw-in feet. - Fewer....
Aquarium Fish Breeder Box, Fish Isolation Box, Hatching Box, Juvenile Fish Spawning Incubator, Water Isolation Net Hatchery (Green Square)
The large aperture fish breeder tank net is placed in the middle of Fish Isolation Box with the small aperture net. The female fish that is big with baby should be placed in aquarium fish tank breeder with the large aperture net. When the female fish gives birth, the small fish can swim to the small-aperture mesh breeder box through the large-aperture mesh. In this case, the female fish will not be able to eat the cubs in the small aperture net..
There is a bubble circle on the upper end of the fish hatching isolation net. The bubble circles are linked together with small wooden sticks. The purpose is to make the isolation net buoyant and not sink into the water. If the small wooden sign falls off during transportation or installation of the product, you only need to manually link the small wooden sign with the foam ring..
When using fish breeder tanks net, it is necessary to put stones in the large-aperture isolation net and the small-aperture isolation net, so that the isolation net can be opened to the maximum and the fish have more room for movement. If the stone in the breeder tank is not enough to make the product extender to the max, you can find some heavy objects similar to stones instead and then put them in the breeder box net in order to ma....
