The most powerful impact wrench in its class on the market. Even with long impact extensions and universal sockets, the 1894 THOR has the torque to get the job done in a hurry..
Rated 940 ft-lbs traditional Max Torque (compare to 1,600+ ft-lbs nut-busting or bolt-breakaway). Patented oversized floating air motor and twin-hammer assembly put the weight over your hand for balance and allow for industry leading power at only 6.7" in length.
Includes rocking FWD/REV lever, handle located power adjustment wheel, and two-stage trigger for a power selection without tool adjustment.
For use with 3/8" to 1/2" air hoses & 1/4" or 3/8" NPT fittings (adapter for 1/4" included).
4.94lbs, 6.5 CFM continuous use, HI-FLO air fittings recommended on 1/4" & 3/8" fittings!.
Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10
Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
High Quality Material: The connector made of high quality plastic and stainless steel.
corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
GlowShift Diesel Gauge Package Compatible with Ford Super Duty F-250 F-350 6.0L 7.3L Power Stroke 1999-2007 - Tinted 7 Color 60 PSI Boost, 2400F EGT & Transmission Temp Gauges - Tan Triple Pillar Pod
...lor Matched Tan Triple Pillar Pod, Tinted 7 Color Series 3 Gauge Diesel Set, Boost MAP Line T-Fitting Adapter, 3 Gauge Power/Sensor Wiring Harness & an Installation Guide that Walks Users Through the Process of Installing the Gauges, Sensors & Pod Step-By-Step.
Includes 60 PSI Boost Gauge with 1/8-27 NPT Compression Fittings, 9' Nylon Boost Hose & Boost MAP Line T-Fitting Adapter - 2400°F Pyrometer EGT Gauge with 1/8-27 NPT EGT Probe with 3' of Wire, 6' Sensor Harness & 2' Power Harness - Transmission Temperature Gauge with 1/8-27 NPT Temperature Sensor & 2' Power/Sensor Harness - Tinted 7 Color Series Features a Black Dial, Tinted Lens, 7 Solid Color Modes & 2 Color Cycle Modes.
Factory Color Matched Tan Triple Pillar Pod for 1999-2007 Ford Super Duty 7.3L 6.0L Power Stroke F250 F350 Trucks Mounts 3 Gauges to the Truck's A-Pillar - Overlay Design Mounts Pod on Top of the Factory A-Pillar - Manufactured from ABS Plastic - UV Protected - Includes Mounting Hardware.
Includes Ford Super Duty 7.3L 6.0L Power Stroke Installation Guide Complete with Step-By-Step Instructions & Photos that Help Walk You Through the Process of Installing & Wiring this Diesel Gauge Package to Your Truck.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technica....
Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)
Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
Certified Appliance Accessories Ice Maker Water Line, 6 Feet, PVC Core with Premium Braided Stainless Steel
✔COMPATIBILITY: Compatible with water filter system or reverse osmosis with 1/4" or 3/8" plastic water line. Fits for iSpring, APEC Water Systems, Whirlpool, Express Water Reverse osmosis system, And Frizzlife MP99, Culligan, Brondell, Aquasana Water filtration system..
✔MULTI-USAGE: Provides pure water from your RO system or water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. The T fitting allows the system to function for both application with no loss in performance..
✔COMPLETE ICE MAKER WATER LINE KIT: 20feet NSF certified 1/4" tubing, TWO set compression fitting nut, 1/4" Tee fitting and 3/8" Tee fitting allow you to connect to both 1/4" and 3/8" water line water purifier system or RO system..
✔TOOL-FREE INSTALLATION: Push-in quick connect fittings offer easy DIY installation with no tools required..
✔HIGH QUALITY COMPONENTS & 100% SATISFACTION: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience..
Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP
25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP
42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
