Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)
【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus
1X crankshaft damper pulley holding tool.
Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
【 Must Have 】EWK harmonic balancer puller set applies equal pressure to the hub, helping to remove harmonic balances, crankshaft pulleys, and steering wheels safely..
【 Mutiple Use 】Includes 30 different bolts, a pressure screw, 3 adaptors, 18 washers, and a 4-slot yoke that allows you to use with flywheel, crankshaft, steering wheel, pulley and other two or three-hole applications..
【 Completely Kit 】This puller kit includes the most needful SAE and metric bolts sizes (1/4""-28, 5/16""-18, 5/16""-24, 3/8""-16, 3/8""-24, M8x1.25, and M10x1.5) and washers sizes (ID 6mm, ID 8mm, ID 10mm, ID 12mm)..
【 High Quality 】Crafted from heat treated carbon steel with oxide finishes ensures maximum strength, helping the tool withstand tough pulling jobs and resist rust..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
A-Team Performance - Steel Key-Way Power Steering Pump Pulley Single Groove - Compatible with 1955-72 GM Chevrolet SBC BBC Small and Big Block Chevy SBF Small Block Ford Black
Steel Key-Way Power Steering Pump Pulley Single Groove, Black.
Compatible with 1955-72 GM Chevrolet SBC BBC Small and Big Block Chevy SBF Small Block Ford.
V-belt Pulleys — Compatible with small and big block Chevy and small block Ford. A-TEAM'S steel pulleys provide affordable style and reliability, quality-tested to ensure trouble-free performance and durability.
Available in multiple finishes, A-TEAM'S got v-belt pulleys for small and big block Chevy and small block Ford.
Easy to install and helps restore power steering to proper functioning.
Mityvac MVA660 Universal Power Steering Adapter Assists in Removing Trapped Air from Automobile Power Steering Systems Cone Shaped Rubber Body for Tight Seal
Mityvac MVA660 Universal Power Steering Adapter is used for removing trapped air from automobile power steering systems..
Universal cone-shaped rubber body adapts to the varying diameters of many automotive power steering reservoirs (5/8 up to 1 5/8 inches)..
Fits snuggly in the neck of the reservoir to form an airtight seal when vacuum is applied.
Reduces bleed time following power steering repairs..
A handy upgrade for any Mityvac hand pump kit and a must have tool for any automotive repair shop..
19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines
【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
4,000 lbs synthetic rope winch inside a durable tool box mounted on a powder coated plate for portable usage.
Storage and carrying box making it completely convenient to store and carry.
Includes a 16,000 lb pulley block which allows the winch to pull up to 8,000lbs.
Quick connect cord with alligator clips for easy access to a battery power source.
Includes a three 20,000 lb D-shackles, two 8 foot heavy-duty straps rated for 8,000 lbs, one 16,000 lb pulley block, one 12 foot Hand Held remote, one....
Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set
[Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
[Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
[Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
[Built to Last] Heat-treated carbon steel ensures maximum strength.
Chrome and black oxide finishes resist rust and corrosion.
Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
[Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
