MOTOR: Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity.
POWER: Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete.
APPLICATION: Great for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.
LIGHTWEIGHT: Only 14.1 lbs for less fatigue.
MODES: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob.
LOW VIBRATION: Only 18.8m/s2 (full load) for more comfortable operation in hand.
LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment.
SAFETY: Safety clutch shuts down rotation in the event of a bound bit for improved user protection.
HANDLE: Adjustable 360 degree side handle provides better control and can be removed easily.
2-Pack Electric Drill Dust Collector Hammer Dustproof Cover Rubber Scalable Bowl Device Power Tool Utility Accessories
...hich basically means that it will drill and cut through the most stubborn masonry, concrete, steel and wood quickly and effortlessly and with it's quality preset slip clutch, avoids overloading the machine and cuts power if you hit reinforcements, ensuring safe operation for the user..
【2-FUNCTIONS & CHUCK】: The rotary hammer drill has 2 modes for 2-Mode selector—hammering and Hammering-drilling.Hammering is for light chipping,chiselling and demolition applications,In this mode tool can also be used as a level to free a jammed drill bit.Hammering-drilling mode is for concrete and massonary drilling operations..
【COMPACT & COMFORT DESIGN】:Compact ergonomic 360-degree grip design brings maximum power thrust. More reasonable design of chute vent is applied to avoid the high temperature of the motor, gearbox Users feel more comfortable and suffer less fatigue thanks to vibration control through auxiliary handle and the SDS-plus chuck system..
【Carry Case】:Complete with auxiliary handle, depth gauge,robust carry case for safe storage and a spare set of brushes..
2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
ENEACRO 1-1/4 Inch SDS-Plus 13 Amp Heavy Duty Rotary Hammer Drill, Safety Clutch 4 Functions with Vibration Control Including Grease, Chisels and Drill Bits with Case
....5 feet /lbs(7.4 joules)impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision. Heat resistant copper wire motor allows long working time without burning the machine. Anti-dust bottom structure extend the hammer’s use life. ENRH3201 high-performance electric rotary hammer helps to increase your efficiency and makes a better life..
✔️【FOUR FUNCTIONS】 Four different functions of drill only(suitable for wood, steel , etc.), hammer only(suitable for concrete or brick) ,hammer drill(suitable for heavy duty work) function and chisel position adjustment adapt to variety of work scenarios which are easy to switch. You can quickly switch the functions by two different switches. Compared with single function switch design, double function switch design can extend 100% service life..
✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360° adjustable handle applies to different work and the upgraded double layer anti-vibration system with PU soft grip designed to decrease the vibration effectively, and reduce fatigue. Aluminum alloy housing design makes the rotary hammer very sturdy and durable, even if the ma....
2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Heywork Cordless Rotary Hammer Drill, 4 Modes Variable Speed and Adjustable Handle, SDS-Plus Chuck Hammer Drill with 21V 2*4.0Ah Li-ion Battery and Charger, Electric Hammer Drill for Wall, Concrete.
- The Hammer2203 uses a brushless motor, which eliminates the need to replace carbon brushes and allows the motor to run more efficiently. The high-performance motor enables the rotary hammer drill to provide up to 0-8000RPM, 0-4500BPM and 24J impact energy at no load, making it easy to drill holes in hard materials such as concrete, and you can spend the least effort and the fastest get the job done, we've stressed you're sweating while you work..
* & - Heywrok cordless otary hammer drill provides 2 pieces of 21V 4Ah batteries and fast charging, supports overload and overheating protection, and lasts longer. Using batteries instead of wires can work more freely. Others are still looking for sockets, and you've got to work ..
& - - The hammer drill has four modes, the rotary button you can quickly switch to drill only, hammer only, hammer & drill, and chisel position adjustment (to adjust the chisel angle before use). One-button slide chuck for SDS-Plus drill For quick and easy drill removal and installation. Heavy-duty hammer drills help you easily tackle a variety of difficult-to-drill holes in materials such as walls, concrete, granite, metal, wood....
BOSCH 4-Inch x 17-Inch x 22-Inch SDS Max Rotary Hammer Core Bit HC8555 , Gray
EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs..
POWER: With an integral shank, the HC8555 offers better power transmission and is designed to allow smaller hammers to drill larger holes..
VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block..
DIMENSIONS: The Bosch HC8555 SDS-max core cutter measures 4-inches in diameter. The useable length is 17-inches and the overall length is 22-inches..
Only for use with SDS-max rotary hammers.
The bit diameter is 4 inches, and the shank diameter is 0.71 inches..