DZS Elec 6pcs XL6009 DC-DC Booster Converter Module 3V-32V to 5V-35V 4A Adjustable Step-up Voltage Regulator 5V 9V 12V 24V Power Supply Module
XL6009 DC-DC Adjustable Booster Power Converter Module, High efficiency non-isolated booster module can be used for booster voltage stabilizer power supply, DIY adjustable mobile power supply, booster charger, etc..
Input Voltage: 3V-32V, The optimal operating voltage range is 5-32V.
Output Voltage: 5V-35V Continuing Adjust (Step-up module, output voltage is higher than input voltage).
Input Current: 4A (max) Non-Load 18mA (The higher voltage, the greater no-load current.).
The booster power board is equipped with 4A high-efficiency MOSFET switch tube, with the conversion efficiency up to 94%..
Ultra high switching frequency 400KHz, the filter capacitance with small capacity can achieve very good effect, smaller ripple and the volume..
Kungber DC Power Supply Variable, 30V 5A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads
High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
200W Bluetooth Amplifier Board TPA3116,DAMGOO 100W+100W Audio Amp Board with LC Filter Technique,Dual Channel DC8-24V,Password Free Connect to Phone Quietly
CHIP: DUAL TPA3116 HIFI Chip with AM Interference Suppression Function, 100W*2 Output Power.
WIDE INPUT VOLTAGE RANGE: DC 9V-24V with 5.5 * 2.1mm Interface, Laptop Power Supply Is a Good Choice.
BLUETOOTH & AUX INPUT:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the 3.5MM Headphone (Line in) Way.
PROTECTIVE FUNCTION:Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection, This means that the Bluetooth amplifier board is not easily damaged.
TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!.
Furman P-2400 AR Power Conditioner True RMS Voltage Regulation Delivers Stable Voltage Output
True RMS Voltage Regulation delivers a stable 120 volts of AC power to protect equipment from problems caused by AC lne voltage irregularities..
Surge Protection, Furman’s exclusive SMP technology provides the highest level of surge & spike protection available..
Noise Filtration, LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity..
Voltage Protection, Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions..
Diagnostic Lights, LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised..
Voltmeter / Ammeter, Large LED voltmeter/ammeter displays incoming voltage and output current draw ..
Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads
High Precision with 4-Digit and Power Display: Kungber 30V 10A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, The....
Songhe 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Voltage Adjustable Module Laptop Voltage Charger Board Car Power Board 6A (5pcs)
Output power: natural cooling 100 w (MAX), strengthen heat 150 w (MAX) real power use time more actual situation, please Decide whether to add fans, please be sure to ensure heat sink temperature not to exceed 80 degrees..
DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage..
Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need..
(1) continuous adjustable output voltage (12-35 v).
(2) fixed output (select) between 12-35 v, when buying, please tell the shopkeeper..
Input current: 16 a (MAX) (please strengthen heat, more than 10 a).
Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads
... Precision with 4-Digit and Power Display: Kungber 30V 10A lab DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
Compact and Various Application: This lab DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
Reliable and Safety: many safety measures are adopt in Kungber lab DC power supply - Grounding wire, Leakage p....
[24v 2.5a 60w power supply adapter Input Voltage :] AC 100 - 240Vac 50/60Hz, Output Voltage: DC 24V, Max Current 2.5A, Max Wattage 60W..
[60W Power Supply Adapter Safe Switching:]Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires....
[24v 2.5a power adapter Application: ](Should be 24V & not exceed 60W) LED Strip Lights, printer, LED display, speaker system, soundbar, humidifier,....
[24v power supply adapter How To Use]connect the power cord and the adapter, then connect the adapter with your device,very easy to use..
[24v 2.5a 60w power supply kit Package Include:] Length 1.2M/47.2IN US AC Power Cord*1, 24V 2500mA power adapter (with 1.2M DC cable and 5.5mm x 2.5mm....
Adjustable DC Power Supply (0-30 V 0-5 A) with Output Enable/Disable Button HANMATEK HM305 Mini Variable Switching Digital Bench Power Supply
【Auto Power Calculation】 - Intelligently calculates output voltage and current into power and displays the value on its large screen..
decimal point automatic carry & LED 4 digits display of voltage function displays.current and powe.
The keyboard can be locked to prevent misoperation..
【Output switch control】 - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause the instrument to burn out.,which often occurs in the maintenance.Output key is designed to solve this problem.By pressing the Output key, the required voltage and current can be adjusted without the actual output power,Which makes this DC power supply more secure and more energy efficient..
【Safe and Reliable to Use】 - Safety is our priority. The built-in fan low arc noise & low ripple,The power supply is durable and compact. Productive work since the power supply comes multiple protection of Over-voltage, over-current, over-power, over-temperature, short-circuit powerful protection function..
【Wide Application】 - Applied in production line test, electrical maintenance, aging products, battery charging, laboratories scientific research and teaching and all other need DC regulated power supply.....
Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer
【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
ultra-low input and output pressure difference..
【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
