Best Pp r Copper Pipe

uxcell Refrigeration Tubing, 1/8\ OD x 5/64\ ID x 16 Ft Soft Coil Copper Tubing

  • 【1/8" OD X 5/64" ID X 16 FT】Refrigeration tube outer dia is 3mm, inner dia is 2mm, total length is 16Ft/5m long.
  • 【HIGH REFRIGERATION EFFICIENCY】Good heat dissipation and refrigeration capability,high strength at low temperature.Copper tubes are hollow,so has strong heat transfer capability.If you need refrigeration for refrigerators, freezers, air conditioners, this is a good choice.
  • 【 COPPER MATERIAL】Copper refrigerator tube has the features of high temperature resistance, corrosion resistance, oxidation resistance, durability, long service life.
  • 【SOFT & SHAPE CHANGEABLE】Because refrigeration copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle.
  • 【WIDELY APPLICATION】Refrigerator Tubing is not only used for refrigerator, freezer and air conditioner as refrigeration tubing coil, but also used as a HVAC system pipe..
Check Stock

Libraton Pipe Cutter, Tubing Cutter 3/16\ to 2\ Outer Diameter, Copper Pipe Cutter, Tube Cutter with Deburring Tool, Copper Cutter, Pipe Cutter Tool for Copper, and Thin Stainless Steel Tube with 2PCs

  • [High-quality Blade] Libraton pipe cutter blade is wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes. Also includes 2 replacement blades..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

RIDGID® 700 41935 Hand Held Power Drive Pipe Threading Machine (Renewed)

  • RIDGID 700 Power Drive 41935 Pipe Threading Machine (Renewed).
  • Hand-held power drive pipe threader will thread a variety of pipe..
  • Heavy-duty, cast-aluminum body provides long operating life..
  • Pipe Threading Capacity: 1/8 in. to 2 in. (3 mm to 50 mm).
  • Designed for use with RIDGID 12-R Die Heads..
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ...s with an outer diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutter features a solid ergonomic PVC knob located at the bottom, providing stability whil....
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

SharkBite U2016-0000LFA Check Valves, 3/4-Inch

  • For use with OD controlled copper, CPVC or PEX pipe.
  • No soldering, clamps, unions, or glue required..
  • Connects copper, PEX, and CPVC pipe in any combination..
  • Designed for vertical and horizontal installation.
Check Stock

California Bad Boy

  • The body made of aluinum alloy,be more strength.
  • The head can be Rotatable,be Portable Use.
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

LENOX Pipe Crimper, 3 Blade (22208C3)

  • The body made of aluinum alloy,be more strength.
  • The head can be Rotatable,be Portable Use.
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

Supply Giant DUFD0058 Copper Cap with Sweat Socket 5/8

  • For use with 5/8 inch Nominal size Copper pipe.
Check Stock

Pipe Cutter, Tubing Cutter Tool 1/8\ to 1-1/8\ Outer Diameter, Copper Pipe Cutter, Mini Tube Cutter for Thin Metal and PVC Pipe, Pipe Cutter Tool for Copper, Aluminum, Thin Stainless Steel Pipe

  • High hardness blade: The blade of this pipe cutter is made of high-strength manganese steel, which can cut metal thin tubes, and it is equipped with a standby blade..
  • Wide Application：The copper pipe cutter can be used to cut copper pipe, aluminum pipe,galvanized pipe,corrugated tube,PVC and thin stainless steel tube..
  • Reasonable Design：The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • Sturdy and durable:The metal cutter tool is made of stainless steel except for the rotating handle made of plastic to ensure its durability..
  • Including deburring tools:There is a deburring tool attached with the pipe cutter tool, made of sturdy steel. It can deliver quick, clean and easy inside diameter reaming of different tubes..
Check Stock