Best Ppr Pe Pipe Machine

PVC Cutter, Cuts up to 2-1/2\ Pipe Capacity Ratcheting Cutter, One-Hand Tubing Cutte (PVC Cutter)

  • Cuts pipe volumes up to 2-1/2" (OD) with pipe thicknesses between 3-10mm.
  • Adopt ratchet drive technology and arch angle design, which greatly saves your strength.
  • For cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc.).
  • 2.8mm thick 4.0 manganese steel sharp blade designed for precise cutting.
  • 1/2" increments on the bottom of the handle for quick pipe measurement.
Check Stock

Reed Tool DEB1-2CTS Deburring Tool for Plastic 1-1/4 to 2-Inch CTS Pipe

  • Three sizes of pipe accommodated per DEB1 tool.
Check Stock

1 Pieces Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Pieces Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings

  • The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use.
  • Appropriate size: The punch size is 3 mm (0.118 inch), which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Both ends of the irrigation plug are of different sizes. One end is suitable for standard holes of 3 mm-6 mm, or one end of any 1/4 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole.
  • this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
  • Practical and durable: the punching tools are made of quality plastic and metal, practical and durable, not easy to rust and damage.
  • the plastic part of the punch allows you to hold it comfortably, and the punch has been polished, so it will not change It is blunt and can serve you for a long time.
  • the drip irrigation pipe plug is made of quality plastic, which is not easy to break or deform, sturdy and durable, waterproof, and can be applied outdoors in sunlight or rainy weather..
  • Scope of application: Irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles.
  • suitable for PE pipes with diameters o....
Check Stock

LiGuVCY Universal Hydraulic Pipe Expander Tool for Aluminum Copper HVAC Pipe with Pipe Expander and 7 Pcs Pipe Expander Heads 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8 Inch

  • Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe..
  • Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter..
  • Compact Design: It's compact enough to fit in your pocket or tool box so you can always have it on hand when you need it..
  • Shear Cutting: Use this PEX tool to create a clean and burr free cut for either Push to Connect PEX fittings or brass crimp fittings..
Check Stock

Reed Tool DEB1CTS Deburring Tool for Plastic 1/2 to 1-Inch CTS pipe

  • Three sizes of pipe accommodated per DEB1 tool.
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Ultima 3 Piece Embroidery Hoop Set for Brother Brother Simplicity & Innovis Embroidery Sewing Machines

  • Durable plastic hoops for machine embroidery. *Verify these will fit your machine before purchase*.
  • This set includes the following 3 hoop sizes: 1” x 2.5” (Brother SA431), 4” x 4” (Brother SA432) and 6.75” x 4” (Brother SA434).
  • Fits BROTHER HE1, HE-120, LB6770, LB6800PRW, LB6800THRD, PE-270D, PE-300S, PE-400D, PE500, PE525, PE540D, PE925, SE270D, SE-400, SE425, SE350 models.
  • Fits BROTHER SIMPLICITY SB7050E & SB7500 models.
  • Fits INNOVIS 500D, 540D, 900D, 950D & 990D models.
Check Stock

Watts 175C Ball-Type Copper Adapters for Solder or Hose Washing Machine Shutoff Valve, Bronze, 1/2 Inch

  • This washing machine shutoff valve requires no special tools and connects copper, PEX, CPVC, and PE-RT pipe in any combination.
  • Bronze body construction with 1/2 inch sweat copper ell adapters for copper tubing, 3/4 inch hose outlet connection, and O-rings for a water tight seal.
  • Rated to 200 PSI and 200 Degrees F for use in potable water and hydronic heating applications.
  • Single lever on-off and suitable for residential or commercial applications.
  • This water shutoff valve controls both hot and cold water simultaneously.
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
  • 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock

Longing Home 2 Pack Rain Gutter Downspout Extensions, Flexible Drain Down Spout Hose Extension Gutter Connector Rainwater Drainage Gutter Extender from 21 to 60 Inches - Black

  • ...sion is retractable and can easily be extended from 21 inches to 60 inches to direct rainwater to where you want it to go. Also it is easy to bend and hold various shapes to suit various situations at different home entrances..
  • 【Easy Installation】 Simply screw the pipe inlet to the extension tube, then screw it in after you have connected it to the gutter and you are done. A detachable adapter allows you to quickly and easily attach it to an existing downpipe..
  • 【Package】 2 x Downspout drainage extensions.
  • 2 x raw material straps. The raw material tape can be wrapped around the threads of the pipe connection and then screwed into the pipe inlet. This effectively prevents rainwater from leaking through the connection. Giving you a better experience of using the product..
Check Stock