Best Ppr Pipe Extruder

IdeaFormer-3D 3D Printer Upgraded Extruder Replacement Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • Material: Aluminum alloy. The CR10 extruder kit made of aluminum alloy material is more stable and durable during working than the original plastic.....
  • Upgraded: Our improved extruder kit has an adjustable bolt, which has a stronger pressure to push the filament into the printer nozzle and makes....
  • Easy Installation: The extruder hotend includes all the necessary screws & parts, you just need to remove the original extruder and install the new....
  • Application: This extruder feeder drive is compatible with CR10 3D printers. No need to change stepper motors or other mounting hardware. Compatible....
  • After-sales Service: If you have any problems with our product, please feel free to contact us. We will offer professional technical support to you..
Check Stock

Creality Ender 3 Original Extruder Assembled MK8 Hot End Kit for Ender 3 3D Pinter with Aluminum Heating Block and 0.4mm Nozzle

  • Creality 100% original and brand new Hot End Kit for Creality Ender 3, Ender 3X, Ender 3 Pro..
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles..
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V..
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)..
  • Suitable For Creality Ender 3, Ender 3X, Ender 3 Pro..
Check Stock

Arm Exerciser, Arm Muscle Training Machine, Adjustable Hydraulic Pressure 22-440lbs, Power Twister Bar Adjustable Fitness Equipment for Men and Women-Exercise Biceps, Pectoral Muscles,Red

  • The handle of the arm strength device is made of PPR imported material, absorbing sweat comfortable and non-slip. The handle is covered with a plastic ring protector for more security.
  • The Power Twister surface is made of double-plated spring steel, which is not easy to fall off paint for a long time. Thickened steel pipe wall, not easy to deform and bend, not broken and damaged, strong fatigue resistance.
  • Power Twister is used to exercise the arm muscles. Its main exercise muscles and chest auxiliary exercise wrist.Increase the muscle strength of upper limbs, including the pectoralis major shoulder elbow and wrist joints and other parts of the power.
  • The Power Twister Bar is a portable exercise device that is great for home, office ,gym or travel etc. Use.
  • If you find any problems or dissatisfaction after receiving the product. Please contact our store by order in time. We will solve the problem for you as soon as possible!.
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

Shimpo Handheld Extruder

  • Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
  • The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
  • Hollow die set available Product number: H-EXTRD-HDS.
  • The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
  • Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

FLASHFORGE Creator Pro 2 3D Printer with Independent Dual Direct Drive Extruder for 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Stable & Precise Printing with ABS, PLA, PETG, PVA, Hips

  • 【Independent Dual Extruder】Compared with traditional parallel extruders, the independent dual extruder structure can print copy and mirror models at the same time, and better supports soluble consumable printing. Higher printing efficiency.
  • 【Considerate Machine Design】Fully enclosed body with removable cover to meet the temperature requirements of different strands.
  • All metal frame body with stable structure.
  • Alloy material construction plates with 6.5mm thick alloy material which can be heated, resistant to transformation..
  • 【Residue Scraping Design】In the process of dual printing mode, the filament tends to overflow due to the continuous heating of the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, and get cleaner dual prints..
  • 【Widely Filament Compatibility】240℃ direct drive dual extruder works with PLA, ABS, PVA (print with PLA), HIPS (print with ABS), PETG Filament, support 3rd party filament. CP2 The Best Dual Extruder 3D Printer Choice!.
  • 【Warranty and Service】All FLASHFORGE 3D printers come with lifetime technical support and a one-year warranty. We provide 24-hour online customer service, if you have any questions about the product operation or so....
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock