Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP
42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe
【Precision Cutting】 - Sharp SKD cutting blade wheel and 6 Pcs high density ball bearing rollers clamps the pipe firmly during cutting, helping pipe cutter perform cutting for 5 to 50mm pipe with stability and precision, especially for metal & steel material, which frees you from the trouble of unfit pipe and uneven cutting surface because of instability.
【Heavy Duty】 - Made of high density but lightweight aluminum alloy, copper pipe cutter is durable and compact. It won’t be broken after many times of cutting and it will last a long time. And aluminum alloy body makes metal pipe cutter more suitable for high density metal material cutting.
【Clear Cutting】 - Tube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping f....
6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse
PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines
Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)
HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
