SINGER | Even Feed Walking Presser Foot - Fork, Perfect for Matching Stripes & Plaids, Quilting & Sewing with Pile Fabrics
SINGER PRESSER FOOT: The even feed foot is also great for matching plaids or stripes and sewing fabrics with nap or pile, to keep them from shifting.
GENUINE SINGER ACCESSORY: It is a genuine SINGER Accessory in a carded blister pack and it fits SINGER C1, C2, C3, C4 Series and M1, M2, M3 Series.
BEST PRESSER FOOT FOR QUILTING: The even feed foot, sometimes called a walking foot, is used for sewing several layers of fabric, and is a must-have when quilting.
FABRIC FEEDING SYSTEM: The Even Feed Foot has its own set of feed dogs that work in conjunction with the sewing machine’s feeding system, for perfect fabric feeding.
USE WITH LOW SHANK MACHINES: The Thick Fabric Sewing is used with low-shank sewing machines, including brands Babylock, Bernina, Brother, Elna, Euro-Pro, Husqvarna Viking, Janome, Juki, Kenmore, Necchi, New Home, Pfaff, Simplicity, White.
The free motion presser foot can be used together with the acrylic sewing ruler on the market. According to the thickness of the acrylic sewing ruler, the sewing foot can be raised or lowered to achieve a beautiful sewing effect.
Sewing ruler feet are made of strong metal, The sewing machine presser foot is the small attachment.
If you do not know what shank your machine is, all you need to do is lower your foot and then measure the height of the center of the hole for the screw from the needle plate.
If the ruler foot frame you bought is not suitable for your machine, please send us a message and we will replace it with a suitable ruler.
PannySewCraft Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More!
►High Quality Premium Sewing Feet From TFBOY.
►Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
►Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
► Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
► Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
VANICE Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More
Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
High Quality Premium Sewing Feet From VANICE.
Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Wide Variety of Stitch Patterns: Easily sew both stretchy and knit fabrics with the 2/3/4 thread overlock with chain stitch and cover stitch, 3-thread narrow overlock, and 3-thread rolled hem.
Adjustable Stitch Length: Change the length of your stitch according to your project by simply turning the dial located on the exterior right-hand side within the range of 1 to 4mm.
Bright LED Light: Brightens the needle entry area. The LED light will not heat up even during long hours of operation.
Lay-In Tension Slots: Thread easily and efficiently by following the color-coded thread paths on the tension slot.
Presser Foot Pressure Adjustment: Ability to adjust the presser foot pressure according to the type of material being sewn.
Kalevel Stainless Steel Hemming Clips Wide Rolled Hem Presser Foot Adjustable Bias Tape Binding Binder Foot Set of 9 for Sewing Machine
9pcs Value Pack -- This item includes an adjustable binding presser foot, 3pcs wide rolled hem pressure foot set (1/2in, 3/4in, 1in), and 5pcs hem clips with measurement..
Bias Binding Presser Foot -- Perfectly sew the wrapping edge of cloth strip and ensure the same sewing effect on both sides. The adjustable range of unilateral cloth width is from 5mm to 20mm..
Rolled Hem Pressure Foot -- Widely used in clothes and other projects with lightweight fabric. 3 Sizes included: 1/2 inch, 3/4 inch and 1 inch. You can use them alternately to meet your different needs..
Stainless Steel Hemming Clips -- Measure hems up to 3 inches wide without any crook, and keep projects tightly in place, great for hemming clothing, curtains, skirt, pants or shorts and more..
Compatibility -- Adjustable hem foot and binder foot fit most low shank snap-on Singer* (some Singers require low shank adaptor), Brother, Babylock, Janome, Kenmore, White, Juki, New Home, etc..
Wide Variety of Stitch Patterns: Easily sew both stretchy and knit fabrics with the 2/3/4 thread overlock with chain stitch and cover stitch, 3-thread....
Adjustable Stitch Length: Change the length of your stitch according to your project by simply turning the dial located on the exterior right-hand....
Bright LED Light: Brightens the needle entry area. The LED light will not heat up even during long hours of operation.
Lay-In Tension Slots: Thread easily and efficiently by following the color-coded thread paths on the tension slot.
Presser Foot Pressure Adjustment: Ability to adjust the presser foot pressure according to the type of material being sewn.
Walking Foot for Low Shank Sewing Machines for Quilting or Thick Fabric Sewing Professional with Instructions(5MM)
★ Function: This walking foot is very useful for sewing material such as leather, suede, velvet, vinyl, satin and other fabrics. These materials are difficult to be fed when sewing but this foot can prevent such materials from crumpling..
★ High Quality: This sewing machine presser foot is made of zinc alloy material which is rust resistant and durable for long time use. It's great for quilting and sewing when matching prints or plaids.
★ With Instruction: This presser feet come with detail using instruction in English for your reference. Any problem, please contact us freely..
★ Application: This guide foot just fits standard low shank sewing machines. Please double check if your sew machine type is suitable..
★ Quality Assurance: All of the product are strictly inspected before shipment, so please purchase with confidence. Please contact us if there is a defective product due to manufacturing reasons..
Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More
Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm..
Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adapter), Babylock, Euro-Pro, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines.
2 Pieces Sewing Machine Presser Foot Straight Stitch Foot Universal General Purpose Zig Zag Foot for Most Sewing Machines Domestic Low Shank Sewing Machines (2 Pieces)
Durable material: the general purpose foot is made of stainless steel, own bright color, not easy to rust, can be applied for a long time.
You will get: 2 pieces universal general purpose feet, compatible with most household low shank sewing machines such as Singer, Brother, Janome, Kenmore and so on.
Easy to install and adjust: the straight stitch foot can fit easily on the bracket on the sewing machine, you can use and adjust any pressure on foot without using a screwdriver, bringing convenience to your life.
Applications: the sewing machine presser foot works well on general sewing machines on most types of fabric, it also good for elastic insertion and basic mending.
Warm notice: the general purpose presser foot has a wide needle slot that allows stitches up to 7 mm in width.
