High Pressure Hand Pump Calibrator for Field Calibration, Calibration Labs Model: AI-DPI-2300 (Only Hand Pump)
Features: Dual source of pneumatic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke..
Model: DPI-2300 | Range: 0 to 600 Kg/Cm2 | Winters Pressure Gauge Range: 0 to 700 Bar | Winters Vacuum Gauge: -1 to 0 Bar/ -1 to 3 Bar..
Material of Construction: SS 304 | Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil | Weight: 2.5 Kg Approx..
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500
The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Ace Instruments High Pressure Hand Pump Calibrator for Field Calibration,Calibration Labs Model: AI-DPI-2300 (Hand Pump Calibrator)
Features: Dual source of pneumatic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke..
Model: DPI-2300 | Range: 0 to 600 Kg/Cm2 | Material of Construction: SS 304 | Weight: 2.5 Kg Approx..
Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil..
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20 Tube - Oval Keg Lid
【Includes All You Need】Keg lid + Air stone + 20-inch tubing.
All the metal parts are made of SS304, the head of the pressure release valve is made....
【Widely Used for Home Brew】 Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all the homebrew kegs that require....
【Best Carbonation & No More Shaking】Forced Beer Carbonation: the diffusion stone will send a tremendous number of gas bubbles out through the beer....
【Safe Pressure Release & Cleaning Tips】 1. For safety concerns, the valve will automatically open up when pressure in the keg reaches 50-55 psi.
【Life Time Service】We are committed to offering you high quality product as well as superior service! Please feel free to let us know if any....
SOLO 378 3-Gallon Concrete Tank Sprayer W/Viton Seals and O-Rings, Large Base
DURABILITY- Durable high-density polyethylene (HDPE) tank is resistant against UV ray impact and is corrosion-resistant and transparent. Equipped with chemical-resistant EPDM seals for use with alkaline and disinfecting solutions. All Viton seals for durability and safety with a wide variety of chemicals.
EXTENDED REACH- 48” nylon-reinforced hose for extended reach.
PRESSURIZATION- Built-in inflation valve allows pressurizing sprayer using a compressor. Large piston pump pressurizes the sprayer as much as 50% faster than the competition. Automatic pressure relief valve releases pressure at 45 psi and may be used to release pressure manually when desired.
VERSATILE- 28” unbreakable wand and commercial shut-off valve assembly. Four-nozzle assortment for multiple spraying tasks: adjustable, fan spray, hollow cone, and jet stream nozzles. Accepts TeeJet type nozzles. 4.5” opening allows easy filling and thorough cleaning.
TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds
Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
