Ace Instruments High Pressure Hand Pump Calibrator for Field Calibration,Calibration Labs Model: AI-DPI-2300 (Hand Pump Calibrator)
Features: Dual source of pneumatic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke..
Model: DPI-2300 | Range: 0 to 600 Kg/Cm2 | Material of Construction: SS 304 | Weight: 2.5 Kg Approx..
Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil..
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
High Pressure Hand Pump Calibrator for Field Calibration, Calibration Labs Model: AI-DPI-2300 (Only Hand Pump)
Features: Dual source of pneumatic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke..
Model: DPI-2300 | Range: 0 to 600 Kg/Cm2 | Winters Pressure Gauge Range: 0 to 700 Bar | Winters Vacuum Gauge: -1 to 0 Bar/ -1 to 3 Bar..
Material of Construction: SS 304 | Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil | Weight: 2.5 Kg Approx..
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
Pneumatic Pressure Calibrator by Ace Instruments for Testing & Calibration of Pressure & Vacuum Gauges Model: DPI-2200
Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)..
Material Of Construction: Alluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
Instructions for use: DO NOT operate this to generate pressure above 30 BAR. Use this unit only for Testing work Use this unit in environments specified in the manual The life of spares such as O-rings can be shortened by exposure to atmospheric conditions. For storage use an airtight container |.
Never remove the SS fittings fitted in the pump. These are fitted and tested for leakage. Use of Teflon tape on these parts after removal and refixing will damage the threads in the pump and our guarantee will become null and void.
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
Datacolor SpyderX Create Kit ‒ from Image capturing and Monitor Calibration to Color Matching and Color Measuring Ideal for Photographers and Graphic Artists SXD100
SpyderX Pro ‒ SpyderX is our most accurate, fastest (4X, easiest monitor color calibrator ever. Groundbreaking lens-based color engine provides a....
ColorReader EZ ‒ Color-coordinate your photo shoot seamlessly. Scan the flat surface of any color to instantly find its Savage Universal background....
Spyder Tripod – Stabilize camera for sharp images. Flexible legs plus lightweight portability gives you the freedom to set up shots from a variety....
Spyder Shelf – Provides vertical storage space in your work area by easily attaching to/or removing from your computer.
Spyder USB-C – Adapts USB-A cables to USB-C ports. The cable is compatible with Mac, Windows-based PCs, Android devices and iPad Pro.
1. The disassembly tool is designed according to the structure of most people and human teeth on the market. The calibrator removal tool can easily and comfortably remove the sun without worrying about tooth injury or contact with the oral cavity..
2.SAFE & DURABLE: Made of food-grade plastic, not natural rubber (easy to be allergic) no worry latex allergy. BPA free. 2mm thickness, our case is super sturdy and durable, no need to worry crack or break on the road..
3.The tuner removal tool can be immersed in 100 degree water for disinfection, or the attachment can be wiped for disinfection. This ingredient does not damage teeth..
4.Attachment surface-smooth and will not damage gums. The grip ring is suitable for any finger, and the pinch part has a handle, which is convenient to use..
Tel-Tru 38100964 Model Gt500R Resettable Bi-Metal Process Grade Thermometer Stainless Steel 5 Dial 1/2 Npt Back Connection 0.250 Diameter x 9 Long 304Ss Stem 50/500 Degrees Fahrenheit +/- 1% Full Span Accuracy
Commonly used in industrial, pulp and paper, food and beverage processing, HVAC, and OEM applications.
Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and....
90 degree Back angle, rear threaded connection design.
Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an....
Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..
Tel-Tru 34100966 Model Gt300R Resettable Bi-Metal Process Grade Thermometer, Stainless Steel, 3\ Dial, 1/2\ NPT Back Conn, 0.250\ Diameter x 9\ Long 304Ss Stem, 200/1000°F, 1% Full Span Accuracy
Commonly used in industrial, pulp and paper, food and beverage processing, HVAC, and OEM applications.
Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
90 degree Back angle, rear threaded connection design.
Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
Professional Hair Cutting Scissors for Hairdresser 6.5\ Lightweight 1.95oz Hair Trimming Scissors Premium Stainless Steel Barber Shears with Extra Sharp Convex Edge Blades for Salon and Home Use
ERGONOMIC DESIGN - the 6.5in professional haircut scissor with arc-shaped handle allows anybody to use it easily. With an adjustment screw, you can fine-tune this scissor to your desire for tension..
DURABLE QUALITY - our hair scissors are handmade with 100% percent upgraded 440C Japanese stainless steel..
EXTRA SHARP - each hair scissor is tempered with precise hand-sharpened blades, ensuring a clean, smooth cut without damaging or splitting hair ends..
WIDE APPLICATION - Made for professionals barbers, suitable for thick, curly, long and, soft hair, great for trimming beard and mustache..
WHAT YOU GET - a set of hair scissors, a screw calibrator, a leather travel bag, exquisite packaging..
Tel-Tru 34100664 Model Gt300R Resettable Bi-Metal Process Grade Thermometer, Stainless Steel, 3\ Dial, 1/2\ Npt Back Connection, 0.250\ Diameter x 6\ Long 304Ss Stem, 50/500 Degrees Fahrenheit, +/- 1% Full Span Accuracy
Commonly used in industrial, pulp and paper, food and beverage processing, HVAC, and OEM applications.
Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
90 degree Back angle, rear threaded connection design.
Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
