ORICO 3.5''Hard Drive Enclosure USB C 3.1 to SATA 6Gbps for 2.5/3.5 SSD HDD Computer External Hard Drive Enclosure Up to 18TB with UASP Tool-free-HM35C3
3.5" External Hard Drive Enclosure -- Easily connects your 3.5/2.5 inch SSD & HDD to PC, laptop, game console, router for data transfer or expanding storage. Metal panel protects the hard disk from outside scratches and maximizes the use of your 3.5"/2.5" HDD and SSD again, offering comprehensive protection for your valuable data(Connect to smartphones need make sure your phones support the OTG).
6Gbps with UASP Accelerated -- The SATA interface of 3.5 drive enclosure supports 6Gbps max transfer speed and UASP accelerated transmission protocol,70% Faster than conventional USB 3.0 when connected to a computer that also supports UASP. ( USB port is standard USB C 3.2 Gen 2 which provides ultra-fast data transfer speed up to 10Gbps).
Easy Installation -- Plug and play with tool-free installation, no driver needed.SSD enclosure with the detachable USB-A to USB-C cable (1M), it is quite flexible to connect and take along.
Hot-swap supported. No request for extra power supply. 【Please click the "Safely Remove Hardware" icon on your PC first then unplug it to avoid data loss when complete usage】.
Intelligent Auto-Sleep -- When the external hard drive case does not operate for 10 minutes that will automatically stop rotating and enter the hibernat....
ineo Aluminum M.2 2280 SSD Heatsinks with 20mm Fan and Pure Cooper Strip for M.2 NVME SSD [C2600 Fan]
20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 8°C - 25°C cooling effect (Varies depending on the environments), very suitable for game players..
Compatible with PCIe NGFF NVMe M.2 SSD Size.
8 x 0.8mm small square): Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
Low viscosity, no damage to the M.2 SSD warranty label..
Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
Cotillon in E-Flat Major, D. 976 – Widerschein, D. 949 – Waltz (Albumblatt) in G Major, D. 844 – 2 waltzes, D. 980
Specially designed heatsink for PCIE NVME M.2 2280 size SSD or SATA M2 2280 size SSD. Also engineered to fit perfectly and easily into the PS5 SSD expansion slot..
Double-Sided Heat Sink. Cooling your SSD to a safe temp to avoid overheating and throttling, improving the performance of your SSD with 10°C – 30°C cooling effect.
Easy to Install. Suitable for various heights M.2 SSD. With 6 screws, fixed screws on two side of the heatsink, offer a better protection of your M.2 SSD.
NVMe M.2 SSD Cooler Heatsinks with 20mm Fan Powerful Cooling…
Compatible with PCIe NGFF NVMe Key-M Key-B M.2 SSD Size: 0.87 x 3.15in. (22 x 80mm), fits for 850 EVO, 860 EVO, 960 EVO, 950 PRO, 960 PRO, etc..
20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 10°C - 30°C cooling effect (Varies depending on the environments).
5V Power Supply: 15PIN SATA Power interface, 1W power consumption..
Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
Low viscosity, no damage to the M.2 SSD warranty label..
Aggistar USB 3.0 2.5inch HDD SSD Case SATA External Enclosure Storage Hard Disk Drive Mobile Harddisk Box OTG Support Portable 5TB
2.5" External Hard Drive Enclosure: Easily connects your 2.5 inch SSD & HDD to PC, laptop, PS4, Xbox for data transfer or expanding storage. It protects the hard disk from outside scratches and makes SATA hard drive portable for the data storage. It is awesome for booting up old HDD/SSD and recovering important files of broken PC..
5Gbps: The maximum data transfer speed of the USB 3.0 interface is 5Gbps. The SATA interface of this enclosure supports UASP accelerated transmission protocol, 70% Faster than conventional USB 3.0 when connected to a computer that also supports UASP. Backward compatible with USB 2.0 or 1.1 ports..
Easy Installation: Tool-free installation. Plug & Play, No driver is needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply. 【Please click the "Safely Remove Hardware" icon on your PC first then unplug it to avoid data loss when complete usage】.
Secure Hard Drive Friendly: The blue LED indicator lets you know the working status easily. The attached EVA foams inside protects your hard disks from improper shaking and scratches. With a detachable 30cm cable, it is quite flexible to connect and take along. (Note: If there are screws on....
UGREEN 2.5\ Hard Drive Enclosure USB 3.0 to SATA III for 2.5 Inch SSD & HDD 9.5mm 7mm External Hard Drive Case Support Max 6TB with UASP Compatiable with WD Seagate Toshiba Samsung Hitachi-Black
2.5" External Hard Drive Enclosure: Easily connects your 2.5 inch SSD & HDD to PC, laptop, PS4, or Xbox for data transfer or expanding storage. It protects the hard disk from outside scratches and makes SATA hard drive portable for data storage. It is awesome for booting up old HDD/SSD and recovering important files from broken PC..
5Gbps with UASP Accelerated: The maximum data transfer speed of the USB 3.0 interface is 5Gbps. The SATA interface of this enclosure supports UASP accelerated transmission protocol, 70% Faster than conventional USB 3.0 when connected to a computer that also supports UASP. Backward compatible with USB 2.0 or 1.1 ports..
Easy Installation: Tool-free installation, plug & play, no driver is needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply. Please click the "Safely Remove Hardware" icon on your PC first then unplug it to avoid data loss when complete usage..
Secure Hard Drive Friendly: The blue LED indicator lets you know the working status easily. The attached EVA foams inside protect your hard disks from improper shaking and scratches. With a detachable 30cm cable, it is quite flexible to connect and take along. Note: If the....
RSV External Hard Drive Enclosure Adapter USB 3.0 To SATA Hard Disk Case Housing - For 2.5 9.5mm 7mm WD Seagate Toshiba Samsung Hitachi SATA III HDD SSD 10TB PS4
Portable hard drive premium, sturdy, stylish aluminum case.
External hard drive USB3.0 Gen 2 (5Gbps) adapter cable with USB connector providing ultra fast read and write speeds for the latest desktop and laptop.
SSD external hard drive case compatible with 7mm / 9.5mm 2.5 inch SATA hard drive from Seagate/WD/HGST/etc, and SSD from.
Usb 3.0 external hard drive enclosure Hot-swappable, plug and play, unnecessary rebooting and extra drivers..
External usb case compatible with multiple OS - WINDOWS XP, 7, 8, 8.1 ,10 or above, MAC OS X 10.6 or above.
EZDIY-FAB M.2 SSD heatsink 2280, Double-Sided Heat Sink, High Performance SSD Radiator for PC / PS5 for PCIE NVME M.2 SSD or SATA M.2 SSD- Black
Aluminum Alloy Heatsink with the most heat dissipation designed specially for 1x M.2 SSD 2280 DIY Desktop PC SSD.
Aluminum alloy-Groove design, Double-sided cooling design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer..
Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc..
The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better..
EZDIY-FAB Heatsink is designed to be installed and removed fast and easily.
