Best Ptfe Gaskets

3-Pack of Hydro Flask-Compatible Wide Mouth Lid Gaskets / Seals / Rubber Stoppers - BPA / Phthalate / Latex - Free

  • Perfect Replacements: Perfect replacement gaskets / rubber stoppers for your wide mouth Hydro Flask Lid / Hydroflask Lid. Made from high-quality, durable, food-safe silicone. BPA / Phthalate / Latex - Free.
  • Replace Your Lost Or Loose Gasket: There are many reasons to have spare gaskets on hand. Gaskets get lost periodically. Warped or worn out gaskets can cause leaks. Always have a spare on hand!.
  • Stop Using Damaged Or Leaky Gaskets: A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky bottle, defeating the point of having such a great bottle to begin with.
  • Save Money: Replacement gaskets for these lids are hard to find - don't buy a new lid, just get a new set of gaskets and you'll never run out.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing). Soak your gasket in vinegar periodically to prevent unwanted build-up.
Check Stock

3-Pack of 25 Oz Food Jar Gaskets Compatible with Zojirushi Food Jar Gaskets O-Rings Seals by Impresa Products - BPA-/Phthalate-/Latex-Free - Replacement for 25 Ounce Container or Thermos

  • Perfect Replacements: Perfect replacement gaskets / rubber stoppers for your Zojirushi 25 ounce Stainless Food Jars. Made from high-quality, durable, food-safe silicone. BPA / Phthalate / Latex - Free.
  • Replace Your Lost Or Loose Gasket: Hard to find, and we have you covered! There are many reasons to have spare gaskets on hand. Gaskets get lost periodically. Warped or worn out gaskets can cause leaks. Always have a spare on hand!.
  • Stop Using Damaged Or Leaky Gaskets: A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky bottle, defeating the point of having such a great bottle to begin with.
  • Save Money: Replacement gaskets for these lids are hard to find - don't buy a new lid, just get a new set of gaskets and you'll never run out.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM gaskets (based on in-house testing).
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

BVV 1/4\ 37 Degree Female JIC Stainless Steel Hose-24-inch

  • 1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
  • They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

4-Pack of Klean Kanteen (TM)-Compatible Café Cap and Wide Cap Gaskets / O-Rings / Seals by Impresa Products - BPA-/Phthalate-/Latex-Free - Maintenance Kit

  • Replacement For Wide Mouth Bottles: Perfect replacement gaskets / o-rings / seals for Klean Kanteen (TM) Café Caps and Wide Caps, including Café Cap 2.0, Café Cap 1.0, Wide Loop Cap and Flip D-Ring Cap. Gaskets Only. Bottle not included.
  • Replace Your Lost Or Loose Gasket: Gaskets get lost periodically and get warped/worn out over time. A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky bottle. Always have a spare on hand!.
  • Made From High-Quality, Food-Safe Silicone: Our gaskets are made from high-quality, durable, food-safe silicone and are BPA-free, phthalate-free and latex-free.
  • Save Money, Easy To Install: Replacement gaskets for these lids are often hard or expensive to find - don't buy a new lid, just get a new set of gaskets to last you 4x as long. Easy-to-install - directions below. 4 gaskets per pack.
  • Please note: This is an Impresa Products (TM) aftermarket replacement product meeting or exceeding the quality of OEM gaskets for Klean Kanteen (TM) (based on Impresa’s in-house testing).
Check Stock

Sprance CL220 Off-line Automatic Pool Chlorinator for Swimming Pool Ponds Garden,Replacement for Hayward Chlorine Feeder,Economy Off-Line Above-Ground Pool Automatic Chlorine Bromine Feeder

  • Updated CL220:The Off-line Automatic Pool Chlorinator is made of high-quality ABS material, and the overall cylinder is relatively sturdy and durable..
  • Automated Operation:The CL220 offline automatic chlorinating machine can automatically inject the added chlorine tablets, rods or bromine tablets into tap water, and then automatically add the purified water to the pool to complete the purification. Very simple and easy to operate..
  • Safe and Durable:The spiral pattern cover on the top allows the chlorine tablets to be placed more safely and conveniently, and the one-button finger opening operation increases the safety of use. High-quality fluorine rubber sealing ring improves corrosion resistance, making it safer and more durable to use..
  • Package Contains: The package contains the main body of the CL220 offline automatic swimming pool chlorinator, PVC hoses, clips, gaskets, PTFE tape and other installation accessories, which save you time and money..
  • Good after-sales service: We have good after-sales service. After receiving any questions, you can directly communicate with us, and we will give you a satisfactory reply as soon as possible..
Check Stock

SimPure Syringe Filter PTFE Hydrophobic Membrane 100 PCS 0.22um Pore Size 13mm Disc Diameter HPLC and GC Needle Filter Non-Sterile High Throughput Lab Filtration Barreled Packed

  • ✅Hydrophobic PTFE Membrane - The PTFE needle filter material is a PTFE membrane, with the naturally hydrophobic, it with broad chemical compatibility and strong chemical stability and inertia, strong hydrophobicity..
  • ✅Uniform Pore Size - 13mm disc diameter, 0.22μm, pore size, 100 pcs barreled packed. The PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
  • ✅ High-Quality - ISO 9001 certificated, ensuring the quality of the filter from the first inspection, mid-control inspection, patrol inspection, and warehouse inspection..
  • ✅Non-Sterile Syringe Filters - PTFE syringe filters housing is made of premium polypropylene(PP) material with a unique threaded interface (Luer lock) design, non-sterile, no adhesive, and no contamination of the sample. It can be autoclaved and sterilized at 121°C/249.8℉ for 30 minutes..
  • ✅Various Applications - The PTFE needle syringe filters are broadly used for infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. Also, the Luer lock filter is suitable for gas filtration..
Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

  • 3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
  • Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Check Stock

Yeipower Homogenizer Emulsifier Dispersion-Mixer Lab - PTFE Sleeves for All FSH Homogenizer Probes

  • Yeipower has found that customers using FSH homogenizers. PTFE Sleeves are not used enough..
  • Homogenizer working head because of long time use. The PTFE Sleeves fittings in the working head need to be replaced continuously..
  • PTFE Sleeves fit all the accessories in the working heads of the FSH series homogenizers..
  • The product includes 10 PTFE Sleeves. 5 sleeves for each of the 2 types of working heads..
  • Please contact me in the first instance if you have any questions about use. We will give you a satisfactory reply..
Check Stock