Best Ptfe Tube

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ...ocked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile....
Check Stock

MUYI 10 Meters = 32.8 Feet PTFE Teflon Tube OD 4mm ID 2mm for Chemical Electrical Equipment

  • Material: PTFE (Polytetrafluoroethylene)..
  • Outside Diameter: 4mm, Inside Diameter: 2mm, Length: 10 Meters.
  • Use for wiring in Chemical and Electrical Equipment..
  • 【NOT coil with spool!】Please feel free to contact us if the tube is less than 10 meters, we will take responsibility for you..
Check Stock

Buchi Multivapor 048778 PETP Tube Adapter Set for P-12 Parallel Vortex Evaproator, 20mm OD Test Tube (Pack of 12)

  • Configuration with evaporation unit, tube adapters, preparation/transfer rack and glassware.
  • Material in contact with sample PETP (or PEEK alternatively), PTFE, PFA, glass.
  • Temperature deviation: ± 3 °C max. (instrument calibrated at 20 °C).
Check Stock

Mercury Quicksilver 91-74057Q5 GREASE GUN W/ 3oz GREASE TUBE 2-4-C WITH PTFE OUTBOARDS OUTDRIVES TRAILERS ALL, Model: , Outdoor&Repair Store

  • Mercury Grease Gun with 3oz. tube of Mercury 2-4-C Marine Grease with PTFE..
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

  • 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
  • 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
  • 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
  • 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
  • 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check Stock

Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality Ender 3 V2 Ender 3 Ender 3 pro 3D Printer Not for Ender 5

  • 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work....
  • Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the....
  • With more terminal housing and pins as spare parts, in case fail installation and waste ..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock

Foamnseal FNS 500 Polyurethane Foam Dispensing Gun / Tool

  • ■ PTFE coated, stainless steel canister adaptor, needle and check valve. TEFLON coated gun body and barrel for easy foam canister loading and....
  • ■ Accepts Great Stuff Pro, Handi-Foam, Handi-Seal, Touch ‘n Foam and Touch ‘n Seal foam sealants with a screw-on top.
  • ■ Adjustable foam output knob allows pinpoint dispensing and variable foam bead size control from 1/8" to 3" (0.3 cm to 8 cm). Foam shut off....
  • ■ Smooth needle nose dispenser tip for use for easier cleaning and for use with plastic straw tube extenders for foaming hard to reach areas or....
  • ■ Less foam waste when compared to foam sealants with straw dispensers. No post-dispensing foam drip. Restartable for up to 30 days..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

JOANLAB Lab Distillation Apparatus Glass Organic Chemistry Kit 24/40 Laboratory Glassware Distillation 19psc

  • 19 Piece Deluxe Organic Chemistry Glassware Set.
  • This kit includes a distillation column and bleed tube for steam distillation or gas flow reactions. The components of the kit are held in foam case. The overall case size is 510mm x 400mm x 130mm..
  • All glassware is jointed (24/40).And the separatory funnel is with PTFE stopcock..
  • Made of borosilicate glass and by hand blowing,advantage is no bubbles..
  • DRIECT FROM MANUFACTURER:JOANLAB is a manufacturer which has more than 11 years experience in the field of lab products. No middlemen ..
Check Stock