Best Ptfe Tube For 75mm Filament

Snapmaker PETG 3D Printer Filament 1.75mm, 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Blue)

  • Filament Dryer and Remove Moisture: Comgrow Dry Box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments, keeps the filament dry. Avoid entanglement, clogging, poor adhesion and layer migration caused by the dampness of the printing wire.(Note: Only used for the drying of 3D printer Filament).
  • Real-time monitoring of temperature and humidity: Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours.2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display.Press the power button to start, hold the function button(M) to change the dry time and the temperature setting..
  • Large storage volume: Comgrow dryer box can store 2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm.Works perfectly with all standard filament diameters 1.75mm/2.85mm..
  • Great sealed filament box: The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use.The upper cover has a snap button structure, and the sealing performance is good..
Check Stock

HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange

  • 【PETG Filament - Advantages 】 IEMAI PETG filament combine the advantages of PLA and ABS, it’s strong and durable, with high purity, low shrinkage and excellent adhesion, which makes your printing more delicate. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free..
  • 【PETG Filament 1.75mm - Clarity & Light Transmission 】Color :Transparent blue.
  • Tolerances: +/- 0.02 mm, 1 kg spool (2.2lbs).Our PETG Transparent offers excellent clarity, light transmission (in the translucent colors) and high gloss. NOTE: The light transmission of prints can be influenced by infill, thickness and varying size of printed the objects..
  • 【3D Printer Filament - Vacuum Packaging 】 Completely dried for 24 hours before packaging. IEMAI use vacuum-sealed bag for packaging 1.75mm petg filament to keep the humidity percentage controlled and at a minimum to maintain excellent printing performance..
  • 【PETG Filament 1.75 - No Tangle and Easy to Use】 Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. IEMAI PETG Spool is more stronger and can achieve very strong and sturdy prints..
  • 【3D Printing Filament - Print Smoothly】No clogging, ....
Check Stock

SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

CHPOWER PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety....
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

PTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer -Allen Tech PTFE Teflon Tube

  • ID:2mm(0.079'')/OD:4mm(0.158''),Length:5ft.Material: PTFE(common name:Teflon).For 1.75 filament Bowden 3D Printer,Translucent.
  • Temperature range (Degree F):-454 to 500. Flame rating: UL-224 VW-1(UL-recognized). Density: 2.15-2.20 g/cm3..
  • Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543. High lubricating ability and non-stick.
  • Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces.
  • Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial.
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder, Dry Box for Keeping Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material

  • 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament..
  • 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect..
  • 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality..
  • 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation..
Check Stock

SUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), Black

  • 【5 Rolls of 0.25kg 1.75mm SILK PLA Filament, Multiple Color Choices】5 rolls of 250g SUNLU 1.75mm SILK PLA filament.Color: Brass+Red Copper+Bronze+Green+Pink.The design of 250g SILK PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【 Shiny SILK PLA Filament】Compared to regular PLA 3D printer filament, SUNLU SILK PLA filament has a glossy, smooth silky surface that does not require polishing.The fantastic SILK filament has great colour and shine,making it ideal for printing art and craft.Great SILK PLA filament for any 3D print job.It has a nice silk looking shine on prints..
  • 【 Great Easy to Print】Feed smoothly and constantly without clogging the nozzle or extrude.Smooth SUNLU 1.75mm SILK PLA 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging..
  • 【Neatly Wound Filament】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of SUNLU SILK PLA filament with few knots, avoiding possible breaks..
Check Stock

Comgrow 3D Printer PLA Filament 1KG 1.75mm Spool Black Color

  • 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Please pass one end of the filament into the fixing hole to avoid being entangled after use..
  • High quality PLA filament for your 3D printer..
  • Compatible with any 3D printer that use 1.75mm diameter filament..
  • Recommended Extrusion / Nozzle Temperature 180¡ãC - 215¡ãC..
Check Stock

SUNLU 250g PETG Filament 1.75mm Bundle, 3D Printer Filament, Toughness PETG Filaments, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls, Black+White+Grey+Transparent+Blue+Green+Red+Orange

  • ① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use..
  • ②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use..
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers..
  • ④【Filament Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
  • ⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s..
Check Stock