Best Push Lock Potentiometer

Feedback Control Model

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

Aexit 2 x Knobs & Hand Wheels Replacement Volume Control Rotary Knobs 1 Control Knobs 3/8\ Black

  • Overall Size : 43 x 18mm/ 1 3/4" x 3/4"(D*H).
  • Package Included : 2 x Potentiometer Knob.
Check Stock

Zarges Roof Rack Clamps (2) C/W 2 Padlocks

  • 【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
  • usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
  • 【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
  • 【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
  • receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
  • Push head firmly onto the pin and remove key.
  • 【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
  • 【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check Stock

Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

  • Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit.
  • LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring.
  • CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience.
  • STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly.
  • HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage.
Check Stock

Master Lock Receiver Lock Stainless Steel Barbell™ Receiver Lock Fits 5/8 in Receivers Weather Resistant Automotive Receiver Lock 1469DAT

  • LOCK APPLICATION: Best used for vehicles, trailers, and RV hitch locks.
  • EASE OF USE: Receiver lock features convenient Push to Lock locking mechanism: push lock body firmly onto the pin and remove key.
  • DURABLE DESIGN: Weather Tough seal and watertight cap provide protection from moisture and dirt.
  • Hitch lock is rated for Class III/IV 10,000 pound load.
  • SPECIFICATIONS: Usable length of receiver pin is 3-1/2 in..
  • Stainless steel lock fits 5/8 in. receiver openings.
  • Extended length shaft fits Toyota Tundra, Ford F-150/F-250/F-350, GMC/Chevy 2500/3500 and Dodge trucks with heavy-duty tow packages.
  • INCLUDES: One trailer reciver lock, two keys.
Check Stock

Master Lock 1479TAT Receiver Lock, 2 Pack

  • Usable length of receiver pin is 2-3/4 in. (70mm).
  • Push to Lock locking mechanism – push lock body onto pin firmly and remove key.
  • Weather Tough seal and water tight cap protects lock from moisture and dirt.
  • 10, 000 lb. Load Rating.4-pin cylinder for added pick resistance.Same key opens both locks.
Check Stock

uxcell 35mm x 22mm Aluminium Alloy HiFi Speaker Volume Control Knob 6mm Hole

  • For Potentiometer Shaft Dia. : 6mm/0.24".
  • For Potentiometer Base Max.Dia. : 20mm/0.8".
  • Total Size : 35 x 22mm/1.3" x 0.87"(D*H).
Check Stock

Vega Barebones - Ultra Low-Noise Variable Gain Amplifier VGA Module for RF & Software Defined Radio SDR Highly Linear & Wideband 30MHz-4000MHz Frequency Capability w/Bias Tee & USB Power Options

  • A wideband (30MHz-4000MHz), high-performance, general purpose LNA module with a built-in variable attenuator to maximize usability and portability.
  • The attenuation can be controlled either with the on-board potentiometer (analog control) or push button array (digital control).
  • Dual amplifier design with adjustable gain (20dB-50dB at 100MHz), low noise figure and low power consumption. Can be powered through bias tee....
  • Made in North America. Full 1 year warranty!.
Check Stock

ElecGear 8X ALPS 10K Replacement Trimmer Potentiometer for PS4, Xbox One, Elite, Switch Pro Wireless Controllers, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick

  • [ALPS 10KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS3, PS4 DualShock 4 series (PS4, Slim and Pro), Xbox One series (Xbox One, One S|X), Elite Series 1 and 2, and newest Xbox Series S|X. It’s also compatible with Nintendo Switch Pro and some 3rd party controllers like ‘Scuf’ and ‘Razer Raiju Ultimate’ with 10KΩ ALPS thumbstick module inside.
  • [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 10K ohm before ordering. Never judge its value by its color. (Be noticed: Choose 2.1KΩ version for PS5 DualSense and some rare PS4 controllers. ALPS version is not interchangeable with the orange version made by FU.).
  • [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting.
  • [For most joystick problem] – The potentiometer sensor needs ....
Check Stock

Land Rover Genuine ROOF Rail Rack Lock System with Keys Range Rover 03-12 VUB002240

  • ▶【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
  • usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
  • ▶【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
  • ▶【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
  • receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
  • Push head firmly onto the pin and remove key.
  • ▶【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
  • ▶【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check Stock