Da by Rain Barrel Spigot Faucet Kit PVC Bulkhead Fitting with Ball Valve and Garden Hose Adapter Barb 16mm 5/8 OD and Stainless Steel Pipe Clamps and Thread Seal Tape kit for 16mm ID Hose
Package: Garden spigot kit includes PVC ball valve x 1 and PVC bulkhead fitting adapter x 1 and PVC threaded connector x 1 and garden hose adapter....
High Quality: PVC, durable, non-toxic, unleaded,resists cracking and peeling, good for all seasons.Full port, fast and easy to empty your rain barrel....
Specifications: 3/4 inch ball valve, 5/8"(16mm) OD Barb Hose Adapter(for 16mm ID Hose), Perfect connect your Rain Barrel and Hose.
Easy to Install: Drill 1.5inch (37mm) hole to install bulkhead fitting adapter, 4 mm thick durable silicone seal gasket seal the water tight and....
Widely Application: Suitable for water bucket, aquariums, reef tank, irrigation, swimming pools, water parks.they are good tool that can be used in....
2' x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Camlock C and E Fittings
Pool Supplies - Flat discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Camlock C and E fittings) prevent oxidation and rust..
Standard Pump Hose - Hose Length: 50 feet.
Temperature Range : 23°F to 149°F (-5°C to 65°C).
Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 3.15 inch width when folding lay-flat).
Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
Excellent Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfie....
BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings
[Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
Use to evacuate a flooded yard, pump out water from a barrel, and more.
[Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
Fittings designed to fit standard garden hose spigot.
[Use Your Pump]: Threaded brass ends for use with your water pump.
Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
[No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
[Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
2 Pack 2' x 50' Swimming Pool Backwash Hose- Weather Resistant Heavy Duty PVC Lay-Flat Water Discharge Hose General Purpose Reinforced Pool Drain Hose for While Back-Washing Filter and Draining Pool
High Quality Material: Our heavy duty swimming pool backwash hose is made of reinforced PVC material with delicate workmanship, which is resistant to chemical, high-pressure and abrasion. Excellent wear resistance and weather resistance make it durable to use..
Universal Size: The inside diameter is about 2 inches, the length is about 50 feet. The applicable temperature ranges from 23°F to 149°F (-5°C to 65°C). Our universal size pool drain hose is suitable for most ground and above ground swimming pool equipment. 0.25mm thickness swimming pool backwash hoses can withstand the maximum burst pressure of 0.1Mpa..
Wide Application: As essential pool backwash accessories, our pool discharge hose can be widely used in most ground pool equipment such as pool drain hose, pool pump hose, pool filter waste hose, pool clean-out filter and so on..
Easy to Use and Store: Our PVC pool hose can be easily connected to the pump, which makes the whole thing easy and convenient. When you are ready for storing it for next use, just flat rolled up and store in a dry place out of direct sunlight. It will help you clean your pool water for a long time..
Package Information: There are 2 reinforced PVC material swimming pool backwash hoses included in the package, which mak....
D-WEIXIN 2' × 50' Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Hoses for Drain Pools and Clean Filters
The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical and burst resistant..
Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
Unlike traditional paper-thin single layer hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
2 Pack 1.5' x 50' Swimming Pool Backwash Hose- Weather Resistant Heavy Duty PVC Lay-Flat Water Discharge Hose General Purpose Reinforced Pool Drain Hose for While Back-Washing Filter and Draining Pool
High Quality Material: Our heavy duty swimming pool backwash hose is made of reinforced PVC material with delicate workmanship, which is resistant to chemical, high-pressure and abrasion. Excellent wear resistance and weather resistance make it durable to use..
Universal Size: The inside diameter is about 1.5 inches, the length is about 50 feet. The applicable temperature ranges from 23°F to 149°F (-5°C to 65°C). Our universal size pool drain hose is suitable for most ground and above ground swimming pool equipment. 0.25mm thickness swimming pool backwash hoses can withstand the maximum burst pressure of 0.1Mpa..
Wide Application: As essential pool backwash accessories, our pool discharge hose can be widely used in most ground pool equipment such as pool drain hose, pool pump hose, pool filter waste hose, pool clean-out filter and so on..
Easy to Use and Store: Our PVC pool hose can be easily connected to the pump, which makes the whole thing easy and convenient. When you are ready for storing it for next use, just flat rolled up and store in a dry place out of direct sunlight. It will help you clean your pool water for a long time..
Package Information: There are 2 reinforced PVC material swimming pool backwash hoses included in the package, which m....
Vent Systems 4\ inch Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate For Cooling Heating Ventilation System HVAC 4\ inch - Pack of (1)
3 INCH FLEXIBLE DUCTING - Our 3 inch boat blower hose is made of Aluminum and PVC Thermoplastic. 3inch diameter and 16.5 feet total length. Come with 2 pack stainless steel clamps..
DESIGNED for VENTILATION APPLICATIONS - The 3 inch flexible hose is designed aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents.
4-LAYER DEISGN: Our 3 inch vent hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage.
EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - The aluminum 3 inch dryer vent hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze.
WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other install....
COMPATIBLE WITH ATRIX OMEGA AND EXPRESS SERIES VACUUMS. The vacuum hose fits the Omega and Express Atrix series vacuums including models: VACOMEGASLFH, VACOMEGAU, VACOMEGASIPM, VACOMEGASECRH, VACGRNS, VACOMEGAS, and VACAMEXP, VACEXP-03, VACEXP-04, and VACEXP-IPM. Compare to SV-SH33.
STRONG MATERIAL. The Atrix vacuum hose is made of a strong carbon impregnated PVC hose ends, PVC/TPU Material, and 0.047 diameter hard drawn spring steel coil for the interior of the hose.
STRETCH AND ADJUSTABLE SIZE HOSE. The ESD safe vacuum hose has a range of 28.5″ to 6′ this allows for easy storage when not in use, as well as the ability to reach those hard to reach places.
ESD SAFE GROUNDED SYSTEM. The service vacuum utilizes a ESD static safe design for both the vacuum and the accessories and attachments included in the system. ESD is the sudden flow of electricity between two electrically charged objects caused by contact, an electrical short, or dielectric breakdown meaning there will be no electronic shock that could damage precious electronics.
GET THOSE HARD TO REACH SPACES WITH ATTACHMENTS. With the ability to stretch up to 6-feet the Atrix stretch hose allows you to reach behind the couch, under the bed, behind your desk and all of those awkward s....
3Inch Flexible Ducting Hose 16.5 feet Black Aluminum Ducting Dryer Vent Hose with 2 Screw Clamps for Heating Ventilation Air Conditioning (HVAC), Boat Blower, Exhaust Grow Tents
3 INCH FLEXIBLE DUCTING - Our 3 inch boat blower hose is made of Aluminum and PVC Thermoplastic. 3inch diameter and 16.5 feet total length. Come with 2 pack stainless steel clamps..
DESIGNED for VENTILATION APPLICATIONS - The 3 inch flexible hose is designed aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents.
4-LAYER DEISGN: Our 3 inch vent hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage.
EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - The aluminum 3 inch dryer vent hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze.
WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other install....
