BriskHeat HSTAT101004 XtremeFLEX Heating Tape with Adjustable Thermostat Control, 288W, 120 Volt
Heating Tape for Water Pipes: Is designed for process temperature control, freeze protection, and supplemental heat.
heated pipe tape provides accurate thermal response when you need it.
Adjustable Thermostat: The temperature control of this electrical heating tape provides fast uniform heat up to 425°F (218°C).
Durable and Flexible: The multi-stranded resistance wire and serpentine woven heating element of this pipe heating tape are moisture and chemical resistant.
heated tape for water pipes comes in a protective silicone rubber sheath.
Dimensions: This heating tape with thermostat is 1-inch wide and 4ft long.
ideal solution for de-icing pipes and valves.
Safe to Use: Pipe warmer has glass and electrically conductive metal surfaces.
the 6-foot power cord ensures greater protection for a truly versatile, safe product.
ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
30PCS Automatic Chicken Water Nipple Poultry Waterer Feeders Hen Duck Screw Style Water Drink Feeder
...esh water from these 360-degree nipples..
【STURDY AND DURABLE】: Made of durable plastic and stainless steel. Wear and corrosion resistant, well-sealed, strong and sturdy, durable. Ideal for broilers, breeders, laying hens, small hens, ducks, and hunting birds..
【EASY TO USE AND CLEAN】: Screw directly into PVC pipe or use reducer tee with Teflon tape for round PVC pipe. The nipples are removable, so you can easily clean them when needed..
【AUTOMATIC WATER SUPPLY WITHOUT LEAKAGE】: Water is sensitive, no drinking and self-stopping, no leakage, so that your chickens can drink clean water, have healthy breeding, and keep the environment dry and hygienic. You can apply them to pipes, buckets, etc to make convenient water feeders for chickens, geese, broilers, feeders, small hens, ducks, hunting birds, etc..
【WHAT YOU GET】: You can get 30pcs chicken water nipples. The screw size is 11/ 32 inches, and the pilot hole of the drill bit is 5/ 16 inches. It is recommended that 3 chickens/birds share 1 nipple. Suitable for automatic watering of most poultry such as chickens and ducks. If you have any questions, please feel free to contact us..
The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
All four outlets are non-threaded sockets.
2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Furniture Grade means this fitting has a non-marked, glossy finish..
【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
Furniture Grade means this fitting has a non-marked, glossy finish..
DO NOT use these fittings for plumbing projects..
The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
MAXKOSKO Water Pipe Heat Tape for Pipe Freeze Protection, Self-Regulating Heating Cable for Metal And Plastic Home Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 6Ft. 120V
PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long..
HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped..
ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary..
EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F))..
FOR BOTH PLASTIC AND METAL PIPES: The heat tape for water pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter..
MAXKOSKO Pipe Heat Cable for Pipe Freeze Protection, Self-Regulating Heat Trace Cable for Metal And Plastic Home Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 30Ft. 120V
PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long..
HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped..
ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary..
EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F))..
FOR BOTH PLASTIC AND METAL PIPES: The heat tape for water pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter..
【Heavy Duty & Premium Quality】The Libraton PVC pipe cutter body is made of durable hardness aluminum alloy steel. The thick 2.5mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide ....
SDTC Tech 12-Pack U-Shaped PVC Water Pipe Clamps Fit for 25mm OD, Compatible with 3/4" ID PVC Pipe
1" Inner Diameter U-Shaped PVC Pipe Support Clips suit for water supply systems for civil and industrial constructions, not easy to deformation and durable..
Fit Pipe OD: approx 25mm / DN20, compatible with 3/4" ID SCH 40 PVC Pipe..
Made of high quality PVC, with tight structure, Toughness and high strength, can fix and protect the pipelines well..
Comes with screws and hollw wall anchors, easy and convenient for installation, and keep your pipe close to the wall..
