Seaboard Air Line Passenger Service: The Streamlined Era
Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines
Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
Steps of installation: 1.Prepare a fuel line hose.
Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Beaquicy Washer Stainless Steel Hoses with 90 Degree Elbow - 4 Ft Long Red and Blue (2 Pack) Burst Proof - Hot and Cold Striped Water Supply Lines for Washing Machine - 10YEAR WARRANTY
✅【SAFETY AND DURABLE】:Stainless Steel Washer Supply Hose 4 Ft use true 304 stainless steel for braided outer protective cover , can effective protection against rust and leaking. 4 Ft Stainless Steel Washer Hoses has a 3/4-inch female hose thread connection, and the stainless washer hoses are equipped with 90-degree elbows on one end for an easy and smooth installation in tight spaces. Washing machine hot and cold water hoses fit for almost all washers..
✅ 【PRODUCT INCLUDES】:Each package includes two water supply line, 1 x Blue colored stainless hose for cold Water, 1 x Red colored stainless hose for hot water. Washer supply hoses are color-coded to ensure easy matching of hot-to-hot and cold-to-cold from the water supply faucet to the washing machine. 4 FT Washing machine stainless hose with a 90 degree elbow will work from 15° F - 158° F can be used in both high and low temperature environments..
✅【10 YEARS WARRANTY】:The 4 FT Washing Machine Hoses with 3/4" 90-Degree Elbows supports 10 years return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping,if you have any quality probl....
MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines
Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
Steps of installation: 1.Prepare a fuel line hose.
Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
For Use with R2AT & 2SN Hose: Do not use on the following types of line/hose: Soft cover power washer hose, irrigation tubing, plastic tube of any kind., R5 cloth covered, or Super High-Pressure Skive Hose..
Use with (1) each of 1/4"( .25" ) Inner Diameter & Outside Diameter of .53" - 3/8" (.38") Inner Diameter & Outside Diameter of .69" - 1/2" (.50") Inner Diameter & Outside Diameter of .81.
NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case
NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
LENGTH: The line length of this ice maker connector is 25-feet.
CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection.
MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength.
DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting.
EASY INSTALLATION: This flexible supply line is very easy to install.
This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Goodyear Air Hose Reel Retractable 3/8\ Inch x 50' Foot Hybrid Polymer Hose Max 300PSI Commerical Polypropylene Construction
REEL SPECS - This Hose Reel is crafted of heavy duty impact resistant light weight durable Polypropylene Enclosed Spring Driven Case, a newly designed swivel hose inlet connection protecting against leaks.
The 3/8" inch x 50 foot Premium Commercial Hybrid Flex Polymer Hose is a blend of Rubber/PVC and a working pressure of 300PSI / 20BAR.
Included a 36" (0.9m) Lead-in Hose and ergonomic PVC grip.
Our Air Hose Reels our suitable for both air and water usage.
Premium Commercial Hybrid Flex Polymer Hose is a blend of Rubber/PVC, has superior bend radius, no memory (eliminating kinks), lays flat, Resistant to: Water/Oil, Ozone, Weather, Abrasion.
works in conditions of -40°F to 176°F (-40°C to 80°C).
Enclosed Spring Driven Case houses the newly designed swivel hose inlet connection protecting against leaks.
the Auto Guide System, retracts the hose orderly way w/ no pile up.
