Best Pwm Fan Controller Pc

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

  • Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
  • In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
  • There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
  • Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
  • If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..
Check Stock

DIYPC CASE IDX2-BK-ARGB R, Black

  • 【Better Heat Dissipation】The CPU cooler comes with 4 heat pipes and a 120mm PWM fan to make sure excellent heat transfer from the CPU..
  • 【RGB Lighting】RGB lighting is adjustable to match your PC build..
  • 【Sync with MB】The RGB lighting can sync with the motherboard via a 5V 3PIN connector..
  • 【PWM Fan】The 120mm RGB PWM fan delivers a blast of color and improved airflow for extreme CPU cooling performance. Max. Air Flow: 68.2CFM.
  • 【Compatibility】The CPU air cooler supports most Intel & AMD sockets like Intel Intel LGA1700/1200/1151/1150/1155/1156 and AMD AM4/AM5..
Check Stock

CORSAIR Carbide Series 275Q Mid-Tower Quiet Edition Gaming Case

  • High-density sound damping material in the removable roof and side panels deadens noise for your whole PC..
  • An included PWM fan Repeater allows you to connect up to six PWM fans to a single 4-pin PWM header, controlling all your fan's speed and noise levels from a single header..
  • Clean and minimalist styling, finished with curved edges and soft accent lighting..
  • Two included 120mm PWM cooling fans provide ample airflow, with room for up to six 120mm cooling fans and multiple Liquid Cooling radiators..
  • Intuitively placed Cable routing channels and tie-downs makes it easy to route cables neatly away and optimize..
Check Stock

Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 3 Pin PC Fan Controller, 5V Fan Hub, Strong Paste+Magnetic Suction (12V 4-pin RGB is not Supported)

  • ... Taiwan brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities..
  • Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load..
  • Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized)..
  • Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay....
Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

  • 15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
  • Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • 2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.
Check Stock

AVERZELLA 2 Pack PWM Fan Hub Splitter 1 to 5 Splitter 5 Way PC Case Internal Motherboard Fan Power Extension Cable Cord Wire for ATX Computer Case 4-Pin and 3-Pin Cooling Fans (16 inch, Black)

  • 【PWM FAN SPLITTER】- 4-pin PWM fan power supply splitter extension cable can extend 1 CPU fan port to 5 fan ports to solve the lack of pc case fans ports and reduce the load on the motherboard..
  • 【Easy to Plug & Installations】- The Extension Cable Offers Greater Flexibility Between Motherboard and CPU Cooling Fans.The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop..
  • 【WIDELY COMPATIBLE】- The Cable is One 4-Pin Female Connector to 4-Pin Male Connector, Support 4-Pin and 3-Pin Fans Cable, The 1 to 5 Splitter 5 way Fan Power Extension Cable Compatible with 4-Pin and 3-Pin PC Case Motherboard Fans..
  • 【DURABLE CONSTRUCTION】 - Each PWM cable extension cord is sleeved in flexible and sturdy braided black nylon to more durable and make the inside of pc case looks more clean & tidy provide long-lasting performance as well as to avoid dust and breakage..
  • 【SERVICE & WARRANTY】- We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points

  • ✔MOST EFFICIENT SATA TO FAN ADAPTER IN 2019✔ Managing multiple fans from a single case input has become easier for you now. If your motherboard....
  • ✔PWM FAN CONTROLLER TEMPERATURE CONTROL✔ The CPU Port (red port), would be the only port that can be controlled by the operating system. The other....
  • ✔INSTALLATION & CONFIGURATION✔ Simple installation & easy configuration, this fan splitter will work even if only connected to the PSU with SATA....
  • ✔STEP BY STEP SET-UP✔ You will receive 1 hub & 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard....
  • ✔MONEY BACK PRODUCT WARRANTY✔ Our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. We....
Check Stock

Corsair CO-9050067-WW HD Series, HD120 RGB LED, 120mm High Performance RGB LED PWM Three Fans with Controller

  • Independent RGB LED lighting: Each of the 12 RGB LEDs, built directly into the fan frame, are independent, unlocking unique customization and lighting effects. Air flow – 54.4 CFM. Noise level – 30.0 decibels.
  • Intuitive 3-button controller: allows you to cycle through lighting effects, Effect speeds, and colors / PWM control: 800 -1725 PWM rpm control range.
  • High static pressure: provides improved performance over standard case fans/ quiet performance: ultra-thin fan blades ensure less vibration, noise and turbulence/two year Warranty.
  • Controller: 3 button (Effect speed, color, mode)/Effect speed: high, medium, slow/color: White, red, Orange, yellow, Green, Blue, violet, demo/ mode: static, Breathing, pulse, Breathing + pulse.
  • RGB LED hub: 6 port RGB LED hub / allows connection of up to 6 HD120 RGB LED lighting cables to a single fan hub / add more fans and have the same mode/color/Effect speed across all attached fans.
Check Stock

Corsair iCUE H100i Elite Capellix Liquid CPU Cooler

  • A high-performance RGB pump head provides powerful, low-noise cooling for your CPU, lit by 33 ultra-bright CAPELLIX RGB LEDs..
  • Includes a CORSAIR iCUE Commander CORE Smart RGB Lighting and Fan Speed Controller, for precise speed and lighting control over up to six RGB fans..
  • Two 120mm CORSAIR ML RGB Magnetic Levitation PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan..
  • Accurately control your cooling via PWM, adjusting fan speeds from 400 to 2,400 RPM..
  • Zero RPM fan profiles in CORSAIR iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise..
  • Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1200, 1366, 2011, 2011-3, 2066 and AMD AM2, AM3, AM4, FM1, FM2, sTR4, sTRX4.
  • Compatible with the new Intel LGA1700 with purchase of CW-8960091 or CW-8960093 spare parts.
Check Stock