Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker
This usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android.
The vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver..
VK-172 automatically adapt the baud rate, The baud rate has any data output..
The default output is GPS protocol data,you can modify the PS/GLONASS protocol data by testing software or serial commands..
VK-172 built-in high-gain LNA, dual-channel LDO, large area radiation GPS optional baud rate 4800, 9600, 19200, 38400, 5700, 115200, etc..
APROTII Raspberry Pi Screen, 7 inch 1024x600 IPS Portable Monitor, 5-Points Capacitive Touchscreen Display Mini HDMI Monitor for Laptop Raspberry Pi 4B 3B+3A+ & Banana Pi win7/8/10/11 & Game Consoles
...oduction, delicate picture quality and richer colors. The 5-point touch has a 3-5 millisecond touch response, allowing you to freely slide, scroll, select, zoom, and move the cursor, without frame drops due to finger enlargement. Note: if the monitor doesn't boot, pls use another USB cable for extra power.
【7"Raspberry Pi Touchscreen Monitor】APROTII 7" Raspberry Pi screen supports almost Raspberry Pi on the market, Raspberry Pi 4/4b/3b+/3b/2b/Zero W... The monitor is plug and play, no driver need. Connect the screen to the device via the HDMI port, USB C cable powers and enables touch functionality.The monitor will output accurate image and fills the screen perfectly, no manual calibration required. You can adjust the resolution according to your needs..
【Mini Portable HDMI Monitor】This 7 in portable monitor can be connected with laptop/computer via the HDMI interface, and there are three modes copy mode, expansion mode and sub-screen mode can be freely switched. 7 inch mini size saves space but expands your working space, this small portable touch monitor is a great choice for your work, study and leisure.
【Wide compatibility Touch Screen】APROTII 7" IPS Portable Touch Monitor for Raspberry Pi 4B 3B+3A+2B+CM3/3, Banana Pi and BB Black. ....
AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator
[What Is It] Small, portable with self contained radio and antenna, SHARI(SA818 Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
[Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
[Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
[Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B
【DACPi Aluminum Case】Ultra-Thin NUC Aluminum Alloy Case, specially designed for Raspberry Pi, reseved all interface of Pi 4..
【X950 DAC Shield】 Uses a Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also provides a....
【Cooling Solution】Considering that the cooling fan will interfere with the sound quality, only use P165-B embedded heatsink to dissipate heat,....
【How to Power】 5Vdc +/-5% , ≥3A (Via Type-C of Pi 4).
(Recommended to use Geekworm UL listed 5V 4A Type-C power adapter(ASIN:B09J856PND)..
【Compatibility】Only for Raspberry Pi 4 (NOT include Pi 4 board), compatible with Volumio, Rune, OSMC, MoodeAudio, Raspbian Jessie, Openelec etc..
Libre Computer Board ALL-H3-CC H5 2GB (Tritium) Mini Computer with Upstream Free Open Source Software Support
UPSTREAM FREE OPEN SOURCE SOFTWARE: Libre Computer Tritium boards are fully supported by upstream u-boot and Linux. It features the highest level of upstream device driver support among all SBCs on the market including Raspberry Pi. All of our platforms are carefully selected to ensure long term software support..
PROPERLY ENGINEERED FOR RELIABILITY AND LONG TERM SUPPORT: Designed in accordance to proper manufacturing specifications and does not utilize high voltages and unstable clock frequencies that may cause reliability issues. It features both LTS software support and hardware availability..
LOWEST COST AND HIGHEST PERFORMANCE: Optimized the highest performance at the lowest cost, this quad-core platform offers the best TCO when selecting an platform to power modern IoT applications and appliances. It features similar form factor and GPIO interface for easy porting from applications developed on Raspberry Pi..
COMPILE FROM LATEST SOURCE: Tritium does not require any proprietary blobs to boot into full accelerated Linux desktop. Advanced features such as 3D acceleration and HW video acceleration. This is one of the first boards to achieve full stack blob-free support..
FIRST PARTY SOFTWARE AND SUPPORT: Libre Computer provides first party images ....
SunFounder Raspberry Pi 4 Display Touchscreen 7 Inch HDMI 1024×600 USB IPS LCD Screen Display Monitor for Raspberry Pi 400 4 3 Model B, 2 Model B, and 1 Model B+, Windows Capacitive Touch Screen
ENJOY HD VISUALS: SunFounder 7" raspberry pi touch screen has HD 1024x600 resolution, 16.7M(8bit) color numbers for high color reproduction. 16:9 rectangular display format conversion. You can enjoy crystal-clear viewing of all your content with an IPS 170° wide viewing angle..
MULTIPLE APPLICATION: Supports Raspbian/Win7/Win8/Win10 (plug and play), Android/Linux (configuration required). You can also download the Installation Manual for Raspberry Pi from the selling page. (Note: HDMI-Micro HDMI cable for Raspberry Pi 4, HDMI-HDMI cable for Raspberry Pi 3)..
LOW CONSUMPTION: The 7 inch touschscreen consumes less power and works well with Windows computers. It is easy to install drivers for various operating systems..
WIDE TOUCH AREA: Module size is 165.30(W)*121(H)*7.75(T), and the active area is 154.21(mm)*85.92(mm). Most screens on the market have touch problems if the software isn't adjusted, but this small HDMI screen has no problems reaching the sides..
PLUG & PLAY: The display is equipped with Micro USB and HDMI ports. Connect the screen to the device via HDMI and power it via USB. With USB power, you can achieve touch function without a power cord or drive..
Provide online user manual, please check the manual carefully before using!.
15.6inch IPS screen,1920x1080 high resolution. Toughened glass capacitive touch panel, 6H hardness. 3.5mm audio jack supports HDMI audio output.
Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers.
When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie. When used as a computer monitor, supports Windows 11/10/8.1/8/7.
Embedded ferrite Hi-Fi speaker. Also supports VGA input (specific cable is required and should be purchased separately). 100x100mm spacing mounting holes (M4 screw hole) for general wall mount. Comes with 75° tilt angle stand.
Hosyond 7 Inch IPS LCD Touch Screen Display Panel 1024×600 Capacitive Screen HDMI Monitor for Raspberry Pi, BB Black, Windows 10 8 7
7’’ IPS LCD standard display, 1024 × 600 Hardware resolution, Up to 1920x1080 software configuration resolution..
Capacitive touch screen, maximum support 5 point touch.Support backlight control alone, the backlight can be turned off to save power..
Not only Support Raspberry Pi, BB Black, Banana Pi and other mainstream mini PC,but also can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display..
Used as a raspberry pi display that supports Raspbian, Ubuntu, Kali-Linux, Kodi, win10 IOT, free driver, plug and play..
Work as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free driver..
