ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs
...which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
Specifications and Accessories: 34 oz used fluid bot....
5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)
Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
They don't break easily, and have nice sealing performance, not easy to leak.
Air valve can be applied for a long time.
Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
PureSec Inline Shut Off Ball Valve 1/4 inch OD Tubing&Hose&Pipe Use Plastic Quick Connect Fittings for Water Purifier RODI System (Pack of 5)
★WATER&FOOD USE MATERIALS: Our valves are made from safe, food grade materials.They are manifold and widely used for RO system,plumbing or irrigation System etc.
★SIZE&TUBE COMPATIBLE WITH: 1/4 inch OD to 1/4 inch OD.
Fits standard 1/4 inch water line used on most osmosis reverse systems ( check your tube size carefully before order).
★EASY INSTALLATION: New generation Non-Locking Clip technology offers an easy DIY installation without tools required, Just Push to Lock..
★FUNCTION&QUALITY: Quick Connectors are used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality..
★Notes: Our valves are reusable, it can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)..
DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
Water Line Hookup and Installation Kit for Refrigerators and Ice Makers
Provides water to refrigerators, icemakers, water coolers and dispensers, humidifiers and more.
Installs in less than 30 minutes. Quick-Connect fittings offer quick and easy installation with no tools required.
Includes: 15 feet of 1/4 inch NSF Certified water line, Shutoff Valve, Two 1/4″ Quick-Connect Water Line Connector Adapters, 1/4″ x 1/4″ x 1/4″ Quick Connect Tee Fitting, and Instructions with Graphics.
Installation Kit works with most systems using standard 1/4 inch tubing, including reverse osmosis and water filter systems.
Quick Connect Garden Hose Fittings, 4-Pack, Male and Female Solid Brass Connectors, Heavy-Duty Rust Resistant Coupler Supports High Water Pressure Systems, Easy Disconnect Fitting
Garden Hose Quick Connect Fittings – These garden hose quick connect fittings can be used to support a wide range of outdoor landscaping tools and accessories such as gardening hoses, faucets, sprinklers, water distribution systems, and hose bibs..
Rust Proof Solid Brass Construction – DBR Tech garden hose quick connectors are made with a premium-grade brass which makes it stronger and more durable for outdoor plastic or aluminum connections..
Supports High-Pressure Water Flow – The heavier-duty brass not only looks cleaner and more professional it can withstand up to 200 PSI which is important for maintaining fast, continuous water flow without bottlenecking the stream..
Leak-Resistant GHT Threading – Our garden hose connectors quick connect adapters utilize a ¾” GHT water hose threading to ensure a clean, stable connection that keeps water from leaking out and being wasted during operation..
Long-Lasting Outdoor Resilience – Durable and rust-resistant our garden hose quick coupler can outlast hard water, inclement weather, rain, and more, so you can leave it hooked up all year-round. Make to sure to turn off outdoor faucets during winter..
Under Sink Water Filter Install Kit, Complete Filtration System for Kitchen and Bathroom Faucets
Enjoy crisp and clean filtered water directly from your sink faucet!.
QUICK & EASY INSTALLATION – Ready in less than 20 minutes. The PureWater Filters® Under Sink Water Filter Kit comes with everything you need, including easy to follow instructions and graphics. The included Quick-Connect fittings offer fast and secure leak-proof installation..
CLASS 1 FILTRATION MEDIA – NSF Certified and Tested for NSF/ANSI Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I..
MADE IN USA – Includes FREE Lifetime Warranty for Defective and Malfunctioning Parts. A PureWater Filters® Lifetime Warranty registration card is included in every box..
INCLUDES: Inline Water Filter with 3/8” Leak Proof Quick-Connect Fittings, 5 Feet of 3/8” NSF Polyethylene Tubing, 3/8″ to 1/2″ Female Connector, 3/8″ to 9/16″ Female Adapter, 3/8″ to 9/16″ Male Adapter, Mounting Bracket with Screw, and Easy-to-Follow Installation Instructions..
CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs
Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
Made of quality plastic and stainless steel.
3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
Working Temperature: 0-60°C | 32～140°F.
The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
