Best Quick Disconnect Ball Valve

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve:Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing:KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation:KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used:Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media:The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

IORMAN Universal 4500PSI Paintball Air Tank Regulator & Valve Guage (M18 Thread / 800PSI Output)

  • Universal fit makes this remote compatible with all markers. Rated up to 4500 psi..
  • Quick disconnect to ASA adapter included.
  • 30″ Unstretched Length, can be stretched to over four feet..
  • Rebuildable valve core allows you to replace the o-ring on the valve without needing to replace the entire remote line..
  • Includes one year warranty by Captain O-Ring LLC.
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • ...to ensure users and gauges safety: co2 tank pressure regulator has a manual pressure relief valve, you can pull pressure relief valve to release excess pressure when brew beer keg pressure reaches 45-50 psi to ensure safety of users and gauges. carbonated beverage brewing kit comes with O.D 1/4″ and 5/16″ quick disconnect barb fittings, which can be connected to co2 regulator beer threaded fitting to attach your I.D 1/4″ and 5/16″ brewing hose, saving your budget!.
  • Easy to install and use, brewing hose clamp strengthens seal, widely application: keg regulator is easy to install and use, just follow installation steps on this detail page or refer to attached product manual, you can easily complete it. included beer line clamps can further seal connection between beer gas tubing and barb fitting to ensure no gas leakage. beer regulator can be connected to your keg ball lock post disconnect, carbonation cap, corny cornelius keg by connecting with gas line..
Check Stock

HTTMT- US-FF801-BK- Adjustable Tow Towing Bar Bumper Mount 5000lb w/Chains RV Car Truck Jeep System

  • This adjustable Tow Bar includes quick disconnect brackets that can be bolted directly to the frame or bumper of many vehicles..
  • heavy duty Coupler A frame coupler fits 2" Hitch ball.
  • Tow bar attaches easily to bumper mounting brackets with two pins.
  • Quick disconnect brackets allow easy installation and removal.
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

Ultimate Washer UW11-PWABV038 Power Washer Ball Valve Kit 3/8-Inch Male Plug X 3/8-Inch Female Quick Connect, 3000 PSI for High Pressure Hoses

  • Carbon steel ball valve kit designed for high-pressure hoses..
  • Switch wands, tips, or hoses quickly and easily..
  • Valve is easy to turn and provides good leverage under high pressure..
  • Inlet: 3/8 in. Male Quick Connect Plug — Valve: 3/8 in. High-Pressure Ball Valve.
  • Outlet: 3/8 in. Female Quick Connect — Max PSI: 3,000 PSI.
Check Stock

Gurlleu DIN Valve Scuba Yoke Refill Station 4500psi High Pressure PCP Paintball HPA Tank Charging System with 36\ Stainless Steel Braided Hose (Silver)

  • Scuba Refill Adapter with 36" quick disconnect filling whip hose..
  • Built for standard Scuba K-Valve, J-Valve and H-Valve..
  • Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
  • Made of high quality aluminium alloy, which is anti-rust and durable..
  • Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder..
Check Stock

HK Paintball Airsoft Fill Whip Hose Extension 4500 Psi PCP, 36 inch Stainless Steel Air Fill Station & Charging System with Universal Quick-Disconnect Plug Adapter

  • Stainless Steel Material Support High Pressure : The braided stainless steel adapter support 4500 psi high pressure with 36 inch length,and the surface is polished plating, very strong and beautiful..
  • Universally Fit : The charging system extends the line from your tank to the re-fill station, which have 8mm quick release male plug and female socket on the end..
  • Advantage : We offer the 8mm quick disconnect adapter double male fill nipple that you can easy to connect with your existing fill valve/regulator..
  • Easy to use and install : Suitable for compressed air tank up to 4500 PSI. Our products are made of high quality materials, thick and durable, not easy to age, long service life..
  • Package including : 1* Paintball Airsoft Fill Whip Hose, 1* Quick Disconnect Adaptor Double Male Fill Nipple, 2* Gaskets..
Check Stock

Aupoko R134A R12 Valve Core Quick Remover Installer, Air Conditioning Adjustable High Pressure (Red) and Low Pressure (Blue) Valve Core Tool, 2 Pack

  • ...R134a valve core remover installer designs for using of servicing valves to remove and install the valve core R134 or R12 from a 1/4-inch male flare access fitting in AC systems without the loss of refrigerant. Excellent for replacing valve cores without discharging or reclaiming the system..
  • ☀ HIGH & LOW PRESSURE QUICK COUPLER --- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason..
Check Stock

R12 to R134A AC Retrofit Fitting Adapter Kit, R12 R22 to R134A High/Low Fitting Port Retrofit 1/4’’ to 7/16'-20 UNF Conversion Adapter,Fits for AC Air Conditioner Refrigerant

  • 【A/C Adapter】 – The AC fitting port adapter retrofit r12 to r134a is completely used to replace R12 R22 with R134A charging port 1/4″ SAE or 7/16”-20UNF adapter, perfect air conditioning conversion adapter kit..
  • 【PREMIUM QUALITY】 – R12 to R134A retrofit fast conversion adapter kit are made of high quality metal and plastic, solid construction for high heat resistance, durability and safety..
  • 【A/C VALVE CORES】-Applies to the replacement refrigerant valve core leak.These accessories can bear the oil, bear the impact, bear the corrosion, watertightness.
  • 【DIMENSION】 – These Low/High side retrofits/adapters/fittings will convert your old 1/4’’ SAE or 7/16″-20 UNF R12 R22 charging port and make it accept the R134a quick disconnect hose. Low Side, 1/4’’(7/16’’- 20) x 13 mm (Blue). High Side, 1/4’’(7/16’’- 20) x 16 mm (Red)..
  • 【PACKAGE INCLUDES】- 1 Pcs x Blue Low Side Quick Coupler, 1 Pcs x Red High Side Quick Coupler ,1Pcs Valve Core Remover,2Pcs Seal Caps,4Pcs R12 Valve Cores,2Pcs R134a Valve Cores..
Check Stock