Best Quick Disconnect Battery Terminal

M Series Battery Disconnect Switch, 300A Marine Battery Cut Off Switch 48V Power Kill Switch Isolator Single Circuit Battery Shut Off Switch for Car Vehicle RV Trailer Marine Boat Solar

  • 【Battery Disconnect Switch】All boats and vehicles with an engine have at least one battery in order to start the engine and providing power for loads such as lights, electronics etc. This battery isolator switch is used for 48V DC systems to isolate and secure the electrical system, to achieve safe switching between batteries, loads, and charge sources..
  • 【Premium Material】The battery cut off switch is made of ABS plastic housing and Tin-plated Copper studs, which could contribute to maximum conductivity, protecting wiring from dirt, corrosion and rain..
  • 【Safety】Our marine battery switch meet CE Certification and ABYC requirements, one-piece terminal stud design never loosens over time. External ignition protection makes it safe for installation aboard gasoline powered boats..
  • 【Easy Operation】Battery disconnect switch with On/Off position. Switch ON=Power to closed circuit, Switch OFF = No power to the cut-off circuit..
  • 【Wide Application】This red battery disconnect switch could be used as a power cut off, greatly appliacable for RV, travel trailer, marine, boat, hull, camper, solar panel and emergency power battery pack etc, Eliminating any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
Check Stock

X-Haibei Pair 175 amp 2 Gauge Battery Quick Connector Gray, Jumper Cables Connect Disconnect Plug for Trailer

  • Easy to install and use. Copper-plated silver termial. You can use it for long time. Does not generate sparks when inserted or removed..
  • Provides simple and convenient method for disconnecting power to a winch or other electrical device such as remote battery chargers, trailers, or for any purpose requiring a high-current, quick-disconnect connector..
  • Complete set: 1 Pair (2 connector ends, 4 terminal pins ).
  • 1 connector Dimension: 3"x2"x0.75"(inch).
Check Stock

Fluke BT510 Battery Analyzer

  • ...In order to let you understand more intuitively and clearly understand the grounding of the components, the power circuit probe tester comes with an LED indicator and a buzzer. The test light can perform a quick self-test to ensure your tool is in good condition. When the current exceeds 7A, the circuit tester will disconnect the current automatically and give you a buzzer prompt, reminding you whether the tested component is faulty..
  • [ How to Use ]: Clip the red clip to the positive electrode of the car battery and the black clip to the negative electrode of the car battery, press button to “Positive”side with LED lighting RED, conact the tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester..
  • [ Packing Include ]: 1 X Power Scan, 1 x Probe Tip, 1 x Battery Hookup Clips, 1 x User Manual, 2 x clips. The cable length of the circuit tester is about 4m(13ft) which allows you access and test any electrical system easily. Note: This circuit tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage..
Check Stock

Side Post Knife Blade Master Switch, 12V-24V Battery Disconnect Switch, 250/750 Amps Knife Blade Isolator, Auto Battery Cut Off Shut Off Switch for Car Boat RV ATV Vehicles (with Long Bolt)

  • 【Compatible】: This knife-blade battery disconnect switch is only applicable to the negative battery terminal. Its rated current is 250V, and the instantaneous current is 750V. It is suitable for cars, RVs, yachts, vans and trucks..
  • 【Convenience】: This battery disconnect switch is knife blade type and it is easy to install and use. Switch the knife, then power will cut..
  • 【Top Quality】: Our side post knife blade master switch is made of brass material which is corrosion resistance and it has good electrical conductivity..
  • 【Highly Practical】: The battery disconnect switch is used to isolate and secure the electrical system, eliminating any power draw from the battery when vehicle or boat is not in use..
  • 【100% Satisfaction Guarantee】: Confidence comes from quality, this is a promise to you and a spur to us. Word-class manufacturing and high-quality ensure an extended lifetime of our product. Reach us for any questions or issues with our product, we are here of your issue..
Check Stock

CZC AUTO 1-2-Both-Off Battery Disconnect Switch 12V 24V 48V Master Isolator Cut Off Switch Battery Selector Switch for Marine Boat Car Truck Camper Trailer RV Vehicles

  • SOLID BATTERY TERMINAL: made of durable brass and electroplated with copper, which is rust and corrosion resistant, for safety use. With bright metallic color for easy daily check. With a long bolt for convenience.
  • WIDELY APPLICATION: apply to the battery has side post terminal with 3/8’’ hole. Also used for electrical equipment. DC 12V-24V system, 250A continuous and 750A momentary at DC 12V. CZC AUTO blade switch is suitable for car, boat, truck, vehicle, RV, ATV and etc..
  • EASY TO INSTALL & USE: assemble the battery shut off switch to the negative cable. Turns power on and off by just lifting the lever up or down, on/off 2 position.
  • NO MORE DRAINED BATTERY: batteries that are empty and not charged for a long time will shorten the life causing you to replace it. This battery cutoff blade type switch allows you to eliminate any unwanted parasitic power draw from the battery.
  • WARRANTY: CZC AUTO offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our side post battery terminal negative disconnect switch, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

Jtron Top Post Battery Isolator Switch Link Terminal Quick Cut Off Disconnect Master Kill Switch Brass Pure Copper Car Battery Switch with PVC Case Automotive Power Kill Switch Blue+Case

  • ▶EXCELLENT COMPATIBILITY–Universal Car Truck Boat Battery Terminal Master Disconnect With PVC Case Cover.
  • ▶MADE OF 100% Pure Copper–Heavy Duty Wearproof Anti-Slip Dustproof Corrosion Resistant.High Temperature Resistance,Good Conductivity,Stable Performance.
  • ▶EFFECTIVE TO SOLVE THESES PROBLEMS:Electric Leakage And Loss Of Electricity.Corrosion Resistant.
  • ▶SAVE YOUR CAR POWER–Deters Theft And Unwanted Battery Drain,Protect The Whole System From Draining Out.For Some Old Car,The Battery System Is Very Fragile And Won't Start If you Park The Car For A Long Time.Here Is The Cure!.
  • ▶NOTE - Jtron Battery Quick Cut-off and Connect Switch Comes With A 100% Satisfaction Guarantee,Friendly 24/7 Customer Service.Exquisite Protective Package Box..
Check Stock

Nilight 50035R 2FT Ring Wire 2 Pin Lug Cable Eyelet Terminal Harness Extension Charge Cord Quick Disconnect SAE Connection Lead for Motorcycle Car Tractor with 10A Fuse 2 Years Warranty

  • 1. SAE to O ring terminal harness wire, comes with 2 feet long SPT-2 16AWG flexible copper wire include 10A fuse, designed for extending car..
  • Multi-purpose: provide convenient way to either keep your hard-to-access battery charged and alive or draw power from your own battery to save other....
  • Excellent Compatible SAE Connector: 2 pin, positive insulated, quick connect/disconnect. Can plugs into most maintenance battery chargers such as....
  • High Protection: 10A fused is included in safe box for electrical protection while the SAE connector is positive insulated and designed with a....
  • Wide Application: It can be added to car, motorcycle, snowmobiles, tractor, riding mower, scooter, ATV, boat etc to keep battery charged easily. Avoid....
Check Stock

MILAPEAK 10pcs (5 Sets) 6 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 6 Positions Pre-Insulated Terminals Barrier Strip (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strips are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making 6 individual connections or by using the whole barrier bar or part of it up to 6 connections to a single line. Once the connections have been made....
Check Stock

X-Haibei Pair 175 amp 1/0 Gauge Battery Quick Connector Red, Jumper Cables Winch Quick Disconnect Plug with Caps for Trailer

  • Easy to install and use. Copper-plated silver termial. You can use it for long time. Does not generate sparks when inserted or removed..
  • Provides simple and convenient method for disconnecting power to a winch or other electrical device such as remote battery chargers, trailers, or for any purpose requiring a high-current, quick-disconnect connector..
  • Complete set: 1 Pair (2 connector ends, 4 terminal pins,2 CAPS ).
  • 1 connector Dimension: 3"x2"x0.75"(inch).
Check Stock

LotFancy Top Post Battery Master Disconnect Switch, 12V 24V Battery Kill Switch for Car Auto Truck Boat RV ATV Motorcycle, Battery Quick Cutoff Switch, Knob Type, 125/500 Amps

  • 【COMPATIBLE】This top mount battery disconnect switch is easy to install on Negative battery top post (Only). Rated 500 amps surge and 125 amps continuous at 12 volts.
  • 【EASY TO USE】This compact knob style battery disconnect switch is installed directly onto a battery terminal and work by unscrewing or tightening the battery switch into an “on” or “off” position to control electrical flow. Knob Can Be Removed Completely to Deter Theft.
  • 【HIGH QUALITY】Our top post battery cutoff switch is made of Zinc Alloy Copper Plating. It features superior performance and good conductivity. This battery kill switch is rust and corrosion resistant.
  • 【WIDELY APPLICATION】This battery shutoff switch is ideal for cars, boats, trucks, RVs, Vehicles, motor homes, jet skis, motorcycles, race cars and more top post battery devices with 15-17mm diameter pile head.
  • 【NO BATTERY DRAIN】This battery isolator switch provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain. It also acts as a deterrent for car theft. By simply unscrewing its cap, you keep your car safe from thieves.
Check Stock