THE ORIGINAL PATENTED TRIM PULLER IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing....
WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated....
THE AUTHENTIC, REVOLUTIONARY, TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or....
COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering....
DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to....
【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Dent Puller Kit, 56pcs Paintless Dent Repair Kit with T-bar Dent Puller, Double Pole Bridge Puller & Hot Glue Gun, Dent Removal Kit for Car Refrigerator Motorcycle Minor Dent and Deep Dent Remove
Paintless Dent Repair Kit: It is entirely paintless dent removal, The T-bar dent puller and double pole bridge puller are made of tempered high-carbon stainless steel and standard stainless steel, in the parts of the body contacted by the high-quality rubber, and the hot melt can be wholly removed without damaging the original paint. Tips: Recommended for cars with original paint, we are not recommended to use the repair kit if your paint gets damaged before you repair the dent.
Easy to Use: The dent puller kit is suitable for both professional and green hands. Using the principle of leverage to design the dent puller is ergonomic, easy to use, and can pull out dents easily, most of the dents can be removed within 30 minutes. Also, we offer detailed manuals to guide you, please don’t hesitate to contact us if you need help..
Widely Used: T-bar dent pullers come with 2 different puller lines. For big dents, you can use the puller lines to assist. For small dents, you can use the small blue glue tabs. Meanwhile, The remover can be detached into a short T-bar puller, with 25 glue tabs. Newest double pole bridge dent puller, You can insert the blue spacer directly, also insert the black spacer directly. Simpler and more versatile! 30 pcs different shape ....
Trim Puller Tool for Baseboard,Wood Trim Removal Tool for Floor Tile,Molding,Flooring,Siding, Trim Puller with 2PCS Noise Reduction Cover
【HARDENED STEEL TRIM PULLER TOOL】This Baseboard Removal Tool is made of hardened High-strength forged steel, Black matt coating, anti- rust and corrosion,can resist repeated heavy leverage well..
【LABOR-SAVING DESIGN 】 The trim puller tool for baseboard is with sharp edge can be easily driven into the seam of tiles ,baseboards and flooring without damaging the walls and floor, 15 degree wedged center design enables your removal work more efficiently.it can competent with the work of the crowbar, trim bar and wrecking bar..
【Ergonomic Handle】The trim puller is molded with EDPM rubber handle, anti-slip pattern design provides exceptional shock-absorbing , prolonged handle easy to grip , time and strength saving..
【MULTI-USE TOOL】This Tile Removal Tool with nail puller is Multi-function home improvement tool can be widely used in removing molding,door window decorative Panel ,carpet tack strip, glued countertops and other home renovation work..
【NOISE REDUCTION COVER】The trim removal tool equipped with 2pcs noise reduction cover ,which protect you from hearing hurts specailly when you work long time in tile removal,molding trim ,kitchen remold or other home improvement work..
Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389
Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes..
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385
The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes..
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
YOTOO Bearing Pullers Set 5 Ton Capacity, Bearing Separator Kit
HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool..
COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs..
VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully..
WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals.
WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us..
YOTOO Bearing Puller Set 5 Ton Capacity, Bearing Separator Kit
HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool..
COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs..
VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully..
WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals.
WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us..
Oni Tools CAT Injector Sleeve Cup Remover & Installer Set for Caterpillar 3406E C10 C12 C15 C16 C-18 Engine 9U-6891 OEM Replacement
Includes alternatives to 9U6877 Thrust Bearing, 9U7258 Driver Cap, 221-9778 Puller Stud, 4K-0367 Nut - Full, 5P-8247 Hard Washer and 128-7889 Puller....
Works on Caterpillar C-10, C-12, C-15, C-16, C-18 and 3406E engines. The new puller bridge can be used on all three engines..
This tool kit was design to install and remove fuel injector cups. Makes the removal process quick and easy..
Heavy duty steel process, anti-corrosion, high precision and hardness that provides a much longer service life..
Oni Tools ensures quality products and stands behind top of the line manufacturing. We guarantee our products to last and offer support along the way..
Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
