Outdoor Phone System - Waterproof Telephone Cabinet Call Box Weatherproof
Complete Outdoor Phone System - Includes Phone, Weatherproof Enclosure with Blue Phone Label, Secure Side Latch and phone wall-jack with mounting....
NEMA Box - A vandal-resistant and weather-resistant Nema type approach to an outdoor phone system that is guaranteed to withstand any weather....
Easy Install - Enclosure includes 4 external mounting holes allowing you to mount to any wall or fence.
Hard Wired Phone - The phone that is included has a keypad that allows you to dial any number including 0 for the front desk, 911 for emergency or any....
Phone Line - You Do need to have a live phone line to run into the enclosure box to make the phone work. This phone line will power the phone so no....
Shallow-mount subwoofer with true high-performance This sub is slim enough to be mounted in virtually any vehicle Delivers extreme bass with minimum depth Four-layer voice coil for max power handling Dark gray modified-spoke cone with bracing for clear bass response Ventless solid-pole design for direct mount to enclosure rear wall Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth Injection molded SoloKon cone Ribbed Santoprene surround High-temp coil wire Slender,.
strong steel basket with coil-cooling perimeter venting, Durable Spiralead tinsel leads Stitched surround for enhanced cone-to-surround strength Tough double-stitched surround Special spring-loaded binding posts for minimizing depth UniPlate system redirects heat away from motor structure Stamped Steel Basket Push Pin Terminals Top-mount depth : 4-1/4" Cutout diameter : 9-3/16" Frequency Response : 25 - 500Hz Sensitivity : 87.2 dB Minimum Sealed Enclosure : 0.8 cu. ft. Maximum Sealed Enclosure : 3 cu. ft. Minimum Ported Enclosure : 1.25 cu. ft. Maximum Ported Enclosure : 1.75 cu. ft. Subwoofer Design : Round / Circle.
Rockville RSST12 Single 12" 0.9 cu.ft. Sealed Car/Truck Shallow Sub Enclosure
Features: RockvilIe RSST12 Single 12" 0.9 cu.ft. 5/8" MDF Sealed Truck Subwoofer Enclosure Box. Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!. Designed For 12" Shallow Mount Subwoofers. Machine precision cut mounting holes.
5/8" USA Heavy Duty MDF Construction. Top of the line Glue for extra durable adhesion. High quality GOLD spring loaded terminals. Designed, tested, and engineered to work perfectly with high powered subs. Designed to give the best sound quality. Enclosure Measurements:.
Type of Enclosure: Sealed Truck/Shallow. Enclosure Sub Size: Single 12" Shallow. Dimensions in Inches: 20" (L) x 7.5" (Bottom Depth) x 5" (Top Depth) x 15". Top and Bottom Depth: 15". Mounting Depth: up to 6" (enough depth for any shallow sub on the market).
Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.1 Cubic Feet. Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.9 Cubic Feet.
BUD Industries JBH-4961-KO Steel NEMA 1 Sheet Metal Box 6 L x 10 W, Gray
【Specifications】Product name: Electrical Box.
【Product Size】Outer Size of enclosure box (Approx.): 5.91"x5.91"x3.54"(150mmx150mmx90mm)(L*W*H).
Inner Size of enclosure box(Approx.): 5.16" x 5.16" x 3.27"/131 x 131 x 83mm(L*W*H)- - (Allowable Error: ±2mm)..
【Industrial Electrical Box】: electrical unit is not only weather resistant but also waterproof and does not allow dust to enter. You can drill holes inside depending upon your project requirement with no cracks and compromise.
【Easy to operate】: electrical unit is easy to install, Hinged enclosure makes the opening and closing easier.
For the internal mounting, industrial enclosure features an mounting bosses,more convenient for your project..
【Comprehensive Industrial Enclosure】: The junction box features two or three plastic latches for added security and locking. Moisture proof, sunscreen, anti-corrosion for safety from weather based environmental hazards.
StarTech.com 2 Post 9U 19" Wall Mount Network Cabinet-Adjustable Depth 6-15"-Locking IT Switch Depth Enclosure-Vented Computer/Electronics Equipment Data Rack w/Shelf, Hook & Loop Tape (RK9WALM),Black
9U 2 POST SECURE RACK: Wall mount network cabinet enclosure is designed to protect critical network/computer/electronics equipment/switches from damage & is lockable to prevent unauthorized access.
DURABLE AND ADJUSTABLE: This SPCC cold rolled steel locking electronics/data cabinet holds up to 200 lb (90 kg) and can support depths between 6in and 14.6in & comes with a moveable vented 1U shelf.
SPECS: 9U 19" Enclosed cabinet | 2 Post | EIA/ECA-310-E compliant | Mounting depth: 6 to 14.6 in. | 198.9 lb (90 kg) capacity | Lockable door & sides | 1U vented shelf included | 5 year warranty.
DESIGNED FOR COOLING: The door and sides are a strong mesh for abundant airflow around devices, and if additional cooling needed, up to four optional 120mm fans can be installed for active cooling.
PRE-ASSEMBLED: This rack is pre-assembled and ready to be installed. Includes cage nuts and screws, 4 security keys, grounding lugs, and 3m of Hook-and-Loop tape to keep cables organized and secure.
Package Includes: (1) Kicker 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. (1) RockvilIe DBM12 2000w 2 Ohm Marine/Boat Mono Amplifier Amp w/Covers+Bass Remote. (1)RockvilIe RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. What's in the Box: 1 x enclosure assembly. 2 x vertical mounting brackets. 1 x horizontal mount base. 1 x Horizontal mount hook(retainer). 1 x Horizontal mount plate(retaining clamp).
7 x stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure. 11 x nylon flat washers (to be used on all mounting fasteners). 4 x stainless steel pan head phillips M4 x 25mm (for mount base to vehicle). 1 x owners manual. 2 x Kicker stickers. KICKER 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. Two Ohm Speaker. Thick ABS Tube Construction. Flexible Horizontal or Vertical Mounting System.
Spring-Loaded Speaker Terminals. CompR Woofer and Reflex Sub. Ceramic Magnet. Advanced Heat Management System. Signature Double Red Stitching. Grilles included. Dimension (L x W x H): 3 inch x 3 inch x 3 inch. Weight: 30 lbs. Type: Reflex.....
Kicker 15" Solo Baric L7S L7S152 Solobaric Subwoofer+Vented Sub Box Enclosure
Package Includes: (1) Kicker 15" Solobaric L7S Car Subwoofer. (1) RockvilIe 15" Vented Kicker Solo Baric L7 S15L7 Sub Enclosure Box. 20 Drywall Wood Screws (Wood screws are the type of screws.
the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. Features: Kicker L7S152 15" 2000 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S15-4. Dual Two-Ohm Voice Coils. Injection-Molded Polypropylene Cone. Patented Corner Ribs Minimize Distortion.
SoloKon 360-Degree Back Bracing. Ribbed Santoprene Surround With Blue Surround Stitching. UniPlate Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management. Thick Tinsel Leads. Large Ceramic Magnet. Cast Aluminum Basket. Satin-Nickel Plated, Spring-Loaded Speaker Terminals. The Solo-Baric L7S 15-Inch Subwoofer works best with a sealed or ported enclosure and 1,000 watts of recommended power. See below for more details. Specifications: Size: 15" (38.1 cm).
4U Server Chassis - Front I/O Access to PCI Cards - Rackmount Computer Enclosure - Compact 15' Depth Case (ATX, Micro ATX, Mini-ITX) 7X Full Expansion Slots - 8 Bays: 2X 5.25 6X 3.5 - Tupavco TP1842
[Easy Access] Front accessible expansion slot card ports and I/O components.
[Compatible] Enclosure supports all types of ATX motherboards (full-size ATX, microATX, miniATX) as well as the PS-2 ATX power supply or mini-redundant PSU (not included).
[Rack Mount] Mountable to any standard 19” server rack. Dimensions are 19″ x 4U x 15″ Deep.
[Features] Equipped with for 7 Drive Bays, 2 x 5.25″ and 6 x 3.5” (internal), 7 (full height) expansion slots, 1 x 120mm and 2 x 80mm fans included, power and reset switch, 2 x USB, LEDs for Power & HDD.
[Reliable] Constructed of a Heavy-Duty SGCC Steel (1.0 mm) and Aluminum (for handles) with industrial quality and ruggedness. No Assembly Required.
