Best Radial Basis Kernel

SKF NU 215 ECM/C3 Cylindrical Roller Bearing, Single Row, Removable Inner Ring, Straight Bore, High Capacity, C3 Clearance, Brass Cage, Metric, 75mm Bore, 130mm OD, 25mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

SKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2\ Bore, 5-1/8\ Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF NJ 409 MAS/C3 Cylindrical Roller Bearing Single Row Removable Inner Ring Flanged Straight Bore Standard Capacity C3 Clearance Brass Cage Metric 45mm Bore 120mm OD 29mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

FAG NUP2309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Two Piece, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 36mm Width

  • FAG cylindrical roller bearing with a removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

Heartland Ranch Amy And Ty T-Shirt

  • Set of 4 ST225/75R15 ST 225 75R15, Max Capacity: 2830 pounds.
  • The Radial ply tire is constructed with double steel belts and double polyester cords for increased durability, and the shoulder design provides better heat dissipation resulting in longer tread life and even wear. Nylon cap ply ( A protective layer of nylon is wrapped around the entire tread area), to help prevent tread separation..
  • This ST 225/75R15 tire uses radial construction, created specifically for boating, cargo, utility, or horse and stock, as well as towable RVs and toy haulers..
  • Wheel NOT included! Refer to your existing tire sidewall and/or trailer owner's manual to determine the appropriate tire size and load capacity for your application..
  • We sent 4 tires with two packages! Please wait if you just receive one, the other is on the way. Warranty: Radial Trailer Tire guaranteed for 1 year! We offer free exchange for any quality problems within the warranty..
Check Stock

Great Northern Popcorn Black Bar Style Lincoln 8 Ounce Antique Popcorn Machine (Bar Style)

  • Makes roughly 3-gallon of popcorn per batch.
  • cleans up with water. Top Machine is 17.5 L x 20.5 W X 25.75 H inches.
  • Heavy-duty powder coated steel and stainless steel construction and works on standard 110 volt 860 watts (Commercial Quality).
  • Reject kernel tray kernel and oil scoop is included.
  • Switches include: spot light warmer, stirrer and pot heater.
Check Stock

SKF F4B 104-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/4\ Bore, 3-5/8\ Bolt Hole Spacing, 5730lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock