DeepCool CK560 WH Mid-Tower ATX Case, Airflow Front Panel, Full-Size Tempered Glass Window, 3X 120mm ARGB Fans, 1x 140mm Fan, E-ATX Motherboard Support, Front I/O USB Type-C, White
DeepCool CK560 WH PC case was designed following the latest PC component requirements to create an high-airflow gaming case without being too bulky which widely supports motherboards E-ATX, ATX, Micro-ATX and Mini-ITX.
CK560 WH features cross pattern on the front panel to maximize ventilation in the gaming case, quick-release design makes the front panel can be easily removed from the case and mounted back to the position with the magnets and bottom hooks.
High-compatibility CK560 WH ATX gaming case is compatible with 360mm AIO radiator on front or 280mm radiator on top, meanwhile, maximum 175mm CPU air cooler height limitation offers more choices for mighty dual-tower cooler with 140mm fans like DeepCool Assassin III.
DeepCool CK560 WH PC case has an efficient cooling system thanks to the pre-installed three front ARGB fans and a 140mm rear non-ARGB fan which allows ample airflow, CK560 WH supports up to 6pcs 120mm or 5pcs 140mm fans to build High-airflow wind channel in the gaming case.
DeepCool CK560 WH gaming case maximize potential with flexible configurations of any system setup, which supports PSU up to 160mm and 380mm GPUs in length, meanwhile, an adjustable built-in GPU bracket provides extra support extra weight for graphics card to avoid sag.
Radiator Cap, Replace 16401-31480, 1640131480 Compatible with Toyota - 4Runner Avalon Camry FJ Cruiser Highlander Sequoia Sienna Tacoma Tundra Venza Yaris, ES350 GS300 GS430 GX460 RX350 SC430, More
REPLACEMENT RADIATOR CAP : The radiator cap holds the coolant inside the radiator, but it also works as a two-way valve that keeps the right pressure inside so the radiator does it work correctly. If the pressure isn't maintained, the coolant can boil and evaporate, putting the engine at risk of overheating. Symptoms of a Bad Radiator Cap: air enters the system, low coolant level, coolant leaks, overflowing reservoir, overheating engine..
REPLACES PART # : 16401-31480, 1640131480, 16401-46610, 1640146610 radiator cap. The radiator cap can compatible with: 2007-2012 ES350 | 2006 GS300 | 2006-2007 GS430 | 2010-2013 GX460 | 2010 HS250h | 2005 IS300 | 2005-2006 LS430 | 2007-2015 RX350 | 2010-2011 RX450h | 2005-2010 SC430. Once you have a replacement and your engine is cool, simply unscrew the old cap, and install the new by screwing it on..
ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit
PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
Constructed from opaque yellow hard-plastic components.
3 out of 5 cap adaptors include steel rings to hold the ada....
(Pack of 2) Universal 14" Electric Radiator Cooling Fans Slim Push Pull 12V 80W Engine Fan with Mount Kit（Diameter 13.98" /14.76" Depth 2.76")
10 Blades 12V 80W radiator engine cooling fan with mounting kit.
Fitment: Truck/Van/Trailer/RV/Pickup etc.Any Radiator Depending on Size.
Aids to Cool the Entire Engine Bay, including Radiator, A/C System, Intercooler, Oil System, and Transmission.
Easy direct installation, require NO modification Warranty: 3 Year.
How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!.
DOKIKO 725PCS Car Push Retainer Clips & Auto Fasteners Assortment-16 Most Popular Size,Nylon Bumper Push Fasteners Rivet Clips
Includes about 30 kinds of clips to fit in holes in all kinds of sizes including 7mm, 8mm, 9mm and 10mm holes..
Made of high-quality nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
Widely used for radiator yoke, trim panel, door trim panel, bumper, car fender, side skirt, grille, engine cover, mud flap and splash guard shield retainers rivet clips replacement.
Suitable for Mercedes Benz, BMW, GM, GMC, Ford, Chrysler, Toyota, Lexus, Honda, Acura, Dodge, Jeep, Nissan, Infiniti, Mazda, Subaru and other cars.
Mean Mug Auto 201225-3129A Door Trim Panel Retainer 9mm Hole Clips for Toyota - Replaces OEM # 90467-10188 90467-A0005
Size: Top Head Diameter: 13mm, Bottom Head Diameter: 18mm, Stem Diameter: 8.5mm x 9mm, Stem Length: 14mm.
Application: They can be used for Door Trim, Engine Cover, Splash Shield, Side Skirt, Grille, Bumper, Fender, Radiator shield yoke, Door Trim Panel....
Application: They are perfect for 9mm Hole on Door trim and panels and will be use in most of the DIY for Toyota.
Interchangeable with OEM Numbers 90467-10188, 90467-A0005 for Toyota Sienna Corolla Camry Tacoma Tundra Sequoia Matrix Prius RAV4 Scion Avalon Land....
Here's what you'll receive: 25x Door Panel Trim Retainer 9mm Clips, with warranty..
FINDAUTO Complete Radiator+Replacement Engine Cooling Fan Fits 2008 Ford Escape 2008 Mercury Mariner
TOP QUALITY – All Cooling Fans and Radiator are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit..
FUNCTION OF THE RADIATOR – For an engine, the radiator forms the chief part of the cooling mechanism. If there is a fault in the radiator, the entire performance and the life of the engine can be at serious risk..
FUNCTION OF THE COOLING FAN – The radiator cooling fan draws air past the fins of the radiator core to lower the coolant temperature that will circulate through the engine,It receives a signal from a coolant temperature sensor when the engine is running too hot, and it turns the cooling fan assembly on..
WHAT YOU WILL GET – 1PC high quality electric cooling fans and 1PCS complete radiator as the picture show..
NOTE – Before you make the order, Please make sure your car using this type standard connector..
