Best Railing Fittings

Wanhork 304 Stainless Steel Deck Railing Connectors, for 2x4 (Actual 1.5x3.5in) Stair Wood Handrail Deck Railing Bracket (8 PCS, Black)

  • ADVANTAGE-This Deck Railing Connectors is made of 304 High strength Stainless steel.It is sturdy, durable, and forever rust free.It is suitable for the connection and installation of courtyard wooden railings..
  • SECURITY-This Deck Railing Connectors is made of 304 high-strength stainless steel as a whole, Compared to cheap products made of ordinary ABS, PP nylon and other composite materials, This product is absolutely safe, You don’t have to worry about it being attacked by rain or high temperature And weathering resulting in fracture. Our Deck Railing Connectors are the most valuable choice in terms of service life and safety..
  • EASY INSTALL: Step 1. Combine the Deck Railing Connectors with the top of 2"x4"(Actually 1.5"x3.5") transverse wood strip at a 90 degree angle, Drill the guide hole with a Wood Drill, and fix it with the drilling screw (Sanding / trimming may be required at railing ends' corners and edges due to wood external size error). Step 2. There are 6 holes on the side, and 6 screws are used to install the horizontal wooden handrail on the column (the screws are drilled in at 30 degrees)..
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs)

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel,So it can be used indoor and outdoor;.
  • This deck railing hardware fit 1/8-inch OD cable of railing system,The thread screws were designed for wood post,Length of lag screw is 4 inch and length of its thread is 2 inch;.
  • This swage lag screws used Integrated design,So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper;.
  • Note:Length of cable should be 1.5 inch shorter than wood post edge distance(as shown in fig.3).
  • If you want To DIY a high quality railing system,Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Walrkaur 304 Stainless Steel Deck Railing Brackets for 2'' x4''(Actual 1.55'' x3.5'') Railing Wood Post (16pcs)

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 40packs angle sleeves, 40packs adhesive sleeves, 80pcs adhesives, 1pc drill bit(9/32").
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre....
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 4Pack Cable Railing Post 42''x2''x2'' (Post Body 41'') Flat Top Level-drilled Post Stainless Steel Black Finish Top Mount Wood Concrete Level Deck, PS02 BH4L

  • Key feature – This square cable railing post (black finish) is designed for 42″ commercial cable railing projects. It is pre-drilled with 12 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection – This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance – This structural square post is designed with 3″ cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4″ sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 to find slice stabilizer posts to get a broader view. It is important to consult local building offices about the rules....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Steel DN Mate 45 30 90 Degree Angle 4 Sizes Drill Jig for Angled Holes/Straight Holes, Drill Guide for Cable Railing Lag Screw Wood Post, Durable Aluminum Alloy Drilling Jig for Deck Stair Handrail

  • ...to use and carry. We enchase the holes with steel protective sleeves, so no worry about it may crack during drilling, causing the guide holes to get broken or inaccurate..
  • Accurate 3 drilling angles: There are 3 different angles in this portable metal drill guide: 30 degree, 45 degree and 90 degree. Building a stair railing becomes much easier and more, convenient with the 30° & 45° angle holes and 90° for horizontal and vertical straight holes.A new beginner can quickly drill accurate 30/45/90 degree angle holes with a electric hand drill in the post with this tool, time-saving and perfect finish..
  • 4 different sizes of holes: This cable railing drill template guide jig offers 4 different size holes, 3/16” (4.76mm), 1/4”(6.35 mm), 5/16”(7.93mm), 3/8”(9.52mm), which are compatible with most cable railing hardware. The hole drilled by 1/4” fits most 1/8″ cable railings lag screws..
  • 4 Application: This drill guides for portable drills is widely use to  install of wooden, and metal deck railing posts for cable railings and DIY woodworking/Handrail projects. It can work with 6” woodworking F clamp and C clamp for no shaking and safer drilling..
  • This drill guide for straight holes is a part of our cable railing system, we have everything n....
Check Stock

Muzata Cable Railing Post Level-drilled Post Flat Top 36'x2'x2' Stainless Steel Black Finish Wood Concrete Top Mount Deck PS02 BH4S, PT1 PT2

  • Key feature – This square cable railing post (black finish) is designed for 36″ residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection – This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance – This structural square post is designed with 3″ cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4″ sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building....
Check Stock

Muzata 40Pack 1/8 Swageless Cable Railing Kit Invisible Terminal Fixed End Toggle Anchor for Metal Post Angle Adjustable T316 Stainless Steel Stair Deck Corner CB17 CV2 CL1

  • Completely Invisible & Multi-angle - Muzata cable railing kit fixed end CB17 works for 1/8" wire rope. It can be easily stuck and completely hidden inside the METAL posts to get a neat appearance. The multi-angle feature enables the toggle anchor terminal to rotate from 0-180 degrees. Note: this cable railing kit ONLY work as a fixed end, it need to work with a tensioner to construct a cable run.
  • ONLY works for hollow METAL posts(20mm≥hole size≥10mm ).Package include:40packs terminals.
  • No Need Crimper and Reusable - With the patent swageless design, you don’t need a Hydraulic Crimper to swage, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner & Wall Post Solution - With a well-designed compact body, you could use two invisible toggle anchor terminals CB17 at one corner METAL post of 2”x2” to 10”x10”, and they won't hit each other. This fitting is also a great solution for posts against the wall or situations that you are unable to get behind....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock