Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4
for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
Connect the included ribbon cable to the CSI (Camer....
[17.5W 5V 3.5A] Raspberry Pi 4 Case, with iUniker 17.5W 5V 3.5A USB C Raspberry Pi 4 Power Supply with Switch Heatsink 40mm Cooling Fan for Pi 4 4 8gb/4gb/2gb
【Cooling Raspberry Pi 4 Case】Raspberry Pi 4 B Case with 40mm Fan. Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
【Accurately Access All Ports】iUniker Raspberry Pi 4 Model B Case Reserves Enough Space for Pi 4 Model B, So Users Can Access All Ports Without uninstall.
【Advanced Cooling System】Raspberry Pi 4 Case with 40mm Fan.This Fan Has Better Heat Dissipation Performance Than Regular. High Performance Heatsink Help Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
【5V 3.5A Type-C Power】iUniker Raspberry Pi 4 B Case with A Power Supply Which 5V 3.5A Type-C Port and Has UL Safety Certification. Pi 4 Power Supply with Switch Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
【18-month Guaranteed】Our Customer Can Get 18-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Our Team by Amazon Email or Support Email..
Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear
NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
SunFounder Raspberry Pi RAB Holder Breadboard Kit with 830 Points solderless Circuit Board Raspberry Pi Holder for Arduino R3, Mega 2560 & Raspberry Pi 4B, 3B+, 3 Model B, 2 Model B and 1 Model B+
The Sunfounder breadboard kit fits perfectly for a Raspberry Pi 4B, 3B+, 3 Model B, 2 Model B and 1 Model B+ , an R3 or Mega 2560 for Arduino.
The high quality RAB Holder makes everything convenient and neat.Enlarge the fun when you fix the Raspberry Pi and boards for Arduino..
This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails..
Including T-shape GPIO Extension Board and Ribbon Cable, which are special for Raspberry Pi 4B, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+.
Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs, ten 1k resistors, a screwdriver, and some screws..
GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)
Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes heatsinks for cooling down your Raspberry Pi better..
The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano
Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
2 Pack N64 Controller, iNNEXT Classic Wired N64 64-bit Gamepad Joystick for Ultra 64 Video Game Console
Connectivity: Advanced 2.4 GHz wireless RF. Gives you a range of up to 10-meters range. SIMPLE SETUP – Generic USB controller, this uses a standard USB port, if your program or application accepts USB controller input, JUST PLUG AND PLAY! Super sensitive buttons for precision control. Third party controller, not original SNES / NES controller. But it works phenomenal with the Raspberry Pi game emulation and so on..
Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie..
Please Note: DO NOT SUPPORT ANDROID TV BOX, C64(Commodore 64), Google Chromebook, Amazon Fire TV, Steam, Tesla Model. Do not support ONLINE games.
Extended battery life: The Wireless SNES Controller has a battery life of up to 3 years. Battery capacity: 500mA.
2 Pack USB Wired N64 Controller, suily Classic N64 PC Gamepad Joystick Controller for Windows PC MAC Linux Raspberry Pi 3 (Black/Gray)
Use the generic standard USB port, if your program or application accepts USB controller input, it can be used natively without drivers or patches, JUST PLUG AND PLAY!.
Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
Super sensitive buttons for precision control. Third party controller, not original Nintendo 64 controller. But it works phenomenal with the Raspberry Pi game emulation and so on. Cord is approx 5.9 ft. Long..
