Miuzei Case for Raspberry Pi 4, Raspberry Pi 4 B Case with Fan 30mm, Pi 4 Model B 5V 3A Type-C Power Supply for Pi 4 B case, 4 pcs Aluminum Heatsinks Support Rpi 4B 8gb/4gb/2gb (No Raspberry Pi board)
▶【Newest Raspberry Pi 4 Case】9-layer Acrylic Board With Good Nisibility. Miuzei Raspberry Pi 4B Case Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
▶【Accurately Access All Ports】Miuzei Raspberry Pi 4 Model B Case Layered Design Reserves Enough Space for Pi 4 Model B So That Users Can Access All Ports Without Barriers.
▶【Advanced Cooling System】Raspberry Pi 4 Case with A Fan (35mm). Large Fan Has Better Heat Dissipation Performance Than Regular. Heatsinks Assists Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
▶【5V 3A Type-C Power】Miuzei Raspberry Pi 4 B Case with A Power Supply Which 5V 3A Type-C Port and Has ETL Safety Certification. Pi 4 Power Supply Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
▶【12-month Guaranteed】Miuzei’s Customers Can Get 12-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Miuzei Team via Amazon Email or Support Email..
UCTRONICS for Raspberry Pi 4 Dual Fan, Pi 4 Cooling Fan with Heatsink, Dual Fan Kit for Raspberry Pi 4 Model B
Specially suitable for the Raspberry Pi 4 Model B --- One dual cooling fan(50*25*13mm), one thermal tape(50*25*1mm) and two heatsinks(9*9*5mm), perfectly fit to the CPU and the other chips of the Raspberry Pi 4 Model B..
High speed and low noise --- The DC 5V dual cooling fan run quietly at high speed, effectively get rid of the noise..
Efficient heat dissipation --- The dual fan can be close to the heating chips for efficient heat dissipation with the thermal tape (It can stick the cooling fan with Raspberry Pi stably)..
Aluminum alloy material --- High quality aluminum material improves efficient heat dissipation, tough and durable..
Easy to install --- Remove the plastic film on the upper layer of the thermal tape and then stick the thermal tape to the bottom of the dual fan. Put the dual fan on the Raspberry Pi 4 Model B motherboard, then connect the red cable to the second pin, connect the black cable to the third pin. Stick the two heatsinks to the capacitance chip and the LAN chip..
Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4
❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Raspberry Pi 4 Fan, iUniker Raspberry Pi Fan 30x30x7mm Brushless CPU Cooling Fan with Raspberry Pi Heatsink Sets for Raspberry Pi 4 Model B, 3 B+, Pi 3B, Pi 2 (4-Pack with Heatsinks)
Fits for Raspberry Pi 4 Model B/ 3B+/ 3B/ 2B.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough..
Completely solve the overheating problem of you Pi..
Treedix 3.5inch TFT Touch Screen Module 50Hz 320x480 Resolution LCD Display with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry 4B Pi4
The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. Please note that the ABS case is specially designed for Raspberry Pi 4 Model B only..
The 3.5 inch touch screen has 480 x 320 resolution, with resistive touch control.It supports up to 125MHz SPI signal input.
support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom..
Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+,4B).
This product has passed CE and RoHS certification and support Raspbian/Ubuntu/Kali system, provide driver and image. It can display stable without flicker.
The case use split design make it easy to install, protecting your pi computer and screen, and cooling fan with aluminium bracket installed and thermal silicon pad for cooling the chip to keep your pi computer and screen cool always..
NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)
4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear
NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
