MakerSpot FFC Ribbon Flexible Flat Cable Set for Raspberry Pi Models A+, B+, 2, 3, 3B+, 4B.
[Plug to Connect] Easy to connect with camera and module for photo & video transfer..
[Application]: This FFC cable is perfectly compatible with Raspberry Pi camera, compatible with all Raspberry Pi boards: Models A+, B+, 2, 3, 3B+, 4B..
[Package Content] 6 FFC cables in different lengths: 50mm, 100mm, 200mm, 300mm, 500mm, and 1000mm..
Semi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega
This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ /....
It can be assembled very flexibly as a semi-closed enclosure, or as a two-layer bracket, or if you buy multiple sets, it can be used as a Raspberry Pi....
The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or....
The material of the lower cover and upper cover is 1.5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material..
AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi
Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..
Infrared Night Vision IR Camera for Raspberry Pi 4 Pi 3b+ Video Webcam with Case Suits for 3D Printer
New design Acrylic holder case make sure your pi camera is more stable and flexible, the case reserve the hole for heat-sink, IR led and screws hole,....
Compatible with all series, fit for Raspberry pi 4, Pi 3 B+ with 100cm FFC Camera Cable, and match 30cm FPC Cable for Pi Zero, also can works with....
HD resolution, the night vision camera is capable of 2592*1944 pixel static images, and also supports 1080P 30fps, 720P 60fps and 640*480P 60/90fps....
Better low light performance, IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition.
Typical usage scenarios, Home security and surveillance, motion detection, 3D printer observe, time-lapse photography and other Raspberry Pi camera....
Geekworm Raspberry Pi Hdmi in Module, Hdmi to CSI-2 C790, Hdmi Input TC358743 Supports up to 1080p60fps Video & Audio Supported Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W/CM4
【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable(15cm length) ✔1 x FPC 22pin 0.5mm cable(15cm length) ✔1 x I2S cable (15cm length).
Arducam IMX477 Autofocus and Software-Controlled Focus HQ Camera, 12MP 100° FOV Camera Module Compatible with Nvidia Jetson Nano/Xavier NX, M12 Lens
Motorized Focus: Smarter focus control than Official IMX477 High Quality Camera, no more hand touching needed.
2 modes of control focus: Fine-tune the focus with keyboard arrow keys.
No Hassle to Use: Focus motor controlled via camera I2C. No hardware modification required..
High Quality Imaging: Keep the high image quality of 1/2.3″ 12.3 Megapixel IMX477 sensor, max. still resolution 4056(H) x 3040(V). IR sensitivity: Visible Light Only.
Application: Highly recommended for a home surveillance system, monitoring 3D Printer, object recognition and tracking or other machine vision application demand high resolution camera with motorized control..
NOTE: It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Raspberry Pi 3/3B+/4)..