LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4
COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case
ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
for Raspberry Pi 3B+ 3.5 TFT Touch Screen with Case Touch Pen and Heat Sink 320x480 Resolution LCD Display for Raspberry Pi 3 Model B Pi 2 Model B & Pi Model B
STARTO Raspberry Pi 3 B+ 3.5 inch Touch Screen connects with SPI directly and support HDMI screen display at same time, better as human interaction....
The Raspberry Pi 3.5 inch Touch Screen can adjust the resolution by the software which also available for connecting Raspberry Pi 3 B+ directly,....
The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without....
The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen case.
The 3.5 inch resistive Touch Screen can be directly....
Protecting your screen and pi,the split design is easier to install,with white nylon column to help screen maintain balance.(No include Raspberry Pi).
Miuzei Raspberry Pi 4 Touchscreen with Case Fan, 4 inch IPS Touch Screen LCD Display, 800x480 HDMI Monitor for RPI 4b 8gb/4gb/2gb with Touch Pen (Support Raspbian/Kali/Octopi/Ubuntu)- No Raspberry Pi
Raspberry Pi 4 Touchscreen – Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to 60fps..
Orange Pi Touchscreen – Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output..
Raspberry Pi 4 Screen Case – Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System – Raspbian, Kali-linux, Ubuntu, Octopi..
Touchfunction Support System – only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install touch drive), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display (no touch function)..
Packaging Content & After Sales – you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can make your lcd display case looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Yahboom Raspberry Pi Quiet Cooling Fan for Raspberry Pi 4B 3B+ 3B Intelligent Temperature Control Programmable RGB（OLED Display Include）
Random gifts: We will randomly select packages to give away the OLED screen matched with Raspberry Pi Cooling Fan. Perhaps the next lucky one is you..
The speed of the cooling fan can be changed according to the temperature of the raspberry PI through code programming, which can better ensure that your Raspberry Pi is running at a safe temperature.No wiring！No waste of IO port！It also expand Raspberry Pi 40pin header and can be used to connect to other devices..
There are three high brightness RGB lights on the temperature control expansion board. Through programming, you can not only change the color, but also use different color lights to represent different temperatures..
The Raspberry Pi cooling hat driver package is already installed and is suitable for all Raspberry Pi system images, while Yahboom offers all the necessary courses.★★★Important Note: Only the RGB lights will be on after the Raspberry Pi hat is powered on. You must run the program provided by Yaboom before the fan will rotate according to the temperature of the Raspberry Pi board. If you do not run the program, your fan will not rotate! ★★★.
The design of the Raspberry Pi IO port is not affected. Improved design, the fan runs absolutely quiet at any stage, please rest ....
for Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Mini Cooling Fan and Heatsink, 480x320 Resolution 60fps Monitor LCD Display
The 3.5 inch Touch display compatible with Raspberry pi 4 Case, better image performance, support Raspbian Buster System.The screen board design with Power Pin support connect with fan..
Come with mini cooling fan and heat sink make sure your pi works stable, achieve the best heat dissipation, no need to worry about heat dissipation..
Display resolution is 480*320, The raspberry pi display support 125MHz SPI signal input, it can display stable without flicker. When it work with raspberry pi, the refresh rate is about 60FPS, it is enough to play the video and game..
Protecting your screen and pi, the split design is easier to install and has good ventilation, with copper balance column to help screen maintain balance.(No include Raspberry Pi).
For detailed usage tutorials, system burning and driver installation, please refer to the user manual on the detailed description page..
