UCTRONICS Power Switch Cable for Raspberry Pi 4B Power Supply, USB Type C Male to Type C Female Extension Cable with ON/Off Button, Black
Designed for Raspberry Pi 4B Power Supply with USB-C female and USB-C male. Note: This cable is ONLY for power supply, NOT for Data transfer..
ON/OFF Switch effectively reduces wear and tear of the Raspberry Pi power port caused by plugging..
High quality 20 AWG cord, tin-coated copper 26 core cable wrapped with PVC, recommended max. current 4-5A and nearly no voltage drops. Only supports powering low-power devices such as the Raspberry Pi 4, and does not support quick charging protocols..
Easier to power ON/OFF your Raspberry Pi 4B, no more plugging and unplugging the connector..
ROHS compliant, better protect your power charger and Pi 4 board. Please note that the button is pressed to turn off the power, and the button is released to turn on the power..
Note: Only for Pi 4B, unable to support other devices..
This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
Packed well in nice box, also each item packed well separately..
High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Arducam Raspberry Pi HQ Camera, 12.3MP IMX477 Camera Module with CS-Mount Lens, Automatic IR-Cut Switching All-Day Image, Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W
Raspberry Pi HQ Camera: This camera module offers higher resolution, up to 12MP, which can deliver better image quality than 8MP. Also adopting IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
IR-Cut：The camera can switch IR-CUT filter in and out automatically, supports both day and night vision. which can keep you all-day image..
Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration..
Package included: Come with a CS-Mount lens and two cables, 300mm 15-22 pin cable for Pi 1-4 connection and 300mm 22-22 pin cable for Pi 0 and Compute Module connection. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
for Raspberry Pi 7 Inch Capacitive Touch Screen Kuman LCD HDMI Input 1024x600 Display with Case Stand
Capacitive touch control This Raspberry Pi screen resolution is 1024x600 It also has vertical and Horizontal image flip function Image 4 3/ 16 9....
Operating voltage The Touch Screen 5V 1a power supply current requirements within the above 2a on board 400mA DC-DC Boost Regulator to provide power....
Multifunctional when the 7 inch Touch Screen work with the Raspberry Pi it supports the Raspbian Ubuntu Win10 IoT single-touch and free drive When....
With protective case The Raspberry Pi Display comes with the protective case stand which is made with black acrylic Raspberry Pi board can be....
Good customer service If you need any technique support Please let us know we will be surely responsible to all problem Or You could refer the QA.
KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W, High-Power Motor Speed Control Board Dual H Bridge with IR Receiver
This Motor Driver HAT gives your Raspberry Pi the ability to drive two DC motors, with drive current up to 2A..
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions.
Reserved I2C SPI control pins, allows to work with other control boards and sensors. Comes with an IR receiver for communication with an infrared remote controller..
Included 4x M2.5*20MM screws, 4 xM2.5*10MM copper pillars, 4x M2.5 Nuts. Easy to install on your RPi board. Please note Raspberry Pi board, remote control and motors in the photos are Not Included!.
Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping 5V 2.5A
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
MMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for Raspberry pi with USB Port (Without OLED)
if the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat.
HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece..
WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion.
WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4..
Update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry) then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1,BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
FREQUENCY: Radio Frequency : Freq:144-148,219-225, (Main Band) 420-475,842-950 NOTE: TX =0, RX=0. Modem select: STM32-DVM/MMDVM_HS-Raspberry pi Hat(GPIO) or any other (GPIO board).
Greensen Camera Module High Definition Camera Module Board 5MP 160 ° Wide Angle Night Vision Camera 720/1080P Fisheye Surveillance for Raspberry Pi + 15 Pin Cable
High resolution: The sensor itself has a resolution of 5 megapixels and a fixed lens with a fixed focal length. The maximum video resolution is 1080p. This is clear enough for you and a practical part to take beautiful photos of your family..
Outstanding performance: This interface uses a dedicated CSI interface over the CSI bus. This high-bandwidth ink transfers pixel data from the camera back to the processor. You can change the length and expand it comfortably and in time..
Comprehensive compatibility: Our HD Raspberry Pi camera module is suitable for all models of Raspberry Pi 1, 2, 3 and 4..
Multiple use: This Pi camera module can record high-resolution videos and still images. You can use it for time-lapse photography, slow motion and other video techniques. You can also use it to build AI robots or install home security systems yourself..
Easy installation: The camera module connects the 15-pin ribbon cable of the Raspberry Pi to a special 15-pin MIPI camera (CSI). The Omnivision 5647 sensor is located in the fixed focus module..
❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
❤Reliability❤Fully compatible with most similar products.
the number of opening and closing times is not less than 1000 (tested at 20℃).
this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
❤Specification❤Opening size: 13mm × 13mm.
lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
