GeeekPi Mini Tower UPS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, Raspberry Pi UPS Plus Hat, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B
Support OLED display, UPS Plus integration, ICE Tower Cooler integration..
The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information..
The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃..
The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources..
Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in ....
Raspberry Pi 3 b+ Case, iUniker Raspberry Pi 3 Model B+ Transparent Case with Raspberry Pi Heatsink for Raspberry Pi 3B+, 3B - Access to All Ports (Clear)
This is a Very Nice Looking Clear Protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B.
The case is a made of ABS that snaps together around the Raspberry Pi.
It provides the best available protection/accessibility for the Raspberry Pi.
Wall Mountable. Access to All ports. For New Raspberry Pi 3 b+.
Raspberry Pi is not included, Comes with 2pcs Heatsink.
iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)
Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
With Quiet Cooling Fan, it can drop the temps for your Pi.
Include Raspberry Pi Heatsink, Better Cooling Experience.
BITMAIN Antminer T9 S1 S3 S5 S7 S9 A3 D3 L3 V9 120mm High Temp Fan Duct 4 INCH USA Made 1 PCS
Raspberry Pi 4 Touchscreen - Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to....
Orange Pi Touchscreen - Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio....
Raspberry Pi 4 Screen Case - Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System - Raspbian, Kali-linux,....
Touchfunction Support System - only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install....
Packaging Content & After Sales - you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can....
Raspberry Pi 4 Cluster Case, iUniker Raspberry Pi 4 Case with Cooling Fan and Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, 3 B+, Pi 3 B, Pi 2 B, Pi B+ (4-Layers)
Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
Compatible With Current Raspberry Pi's including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
With Quiet Cooling Fan, it can drop the temps for your Pi.
Include Raspberry Pi Heatsink, Better Cooling Experience.
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display
Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
Miuzei Raspberry Pi 4 Touchscreen with Case Fan, 4 inch IPS Touch Screen LCD Display, 800x480 HDMI Monitor for RPI 4b 8gb/4gb/2gb with Touch Pen (Support Raspbian/Kali/Octopi/Ubuntu)- No Raspberry Pi
Raspberry Pi 4 Touchscreen – Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to 60fps..
Orange Pi Touchscreen – Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output..
Raspberry Pi 4 Screen Case – Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System – Raspbian, Kali-linux, Ubuntu, Octopi..
Touchfunction Support System – only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install touch drive), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display (no touch function)..
Packaging Content & After Sales – you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can make your lcd display case looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
GeeekPi Raspberry Pi 4 4GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 5V 3.6A 18W Power Supply with ON/Off Switch, HDMI Cables for Raspberry Pi 4B (4GB RAM)
Includes Raspberry Pi 4 4GB Model B with 64-bit quad-core CPU (4GB RAM).For 2GB Version,please refer to ASIN: B0B7DFF7TY.
8GB Version,please refer to ASIN:B09LYP7QH3.
This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
SunFounder Raspberry Pi Touchscreen 7 Inch Capacitive Screen IPS Monitor LCD Display Supports HDMI USB-C for Raspberry Pi 4B 3B+ 2 Model B Windows with Bracket
Portable USB Touch Screen - This 7inch Raspberry Pi touchscreen features 1024×600 high resolution, 178° wide viewing angle, low comsumption and 5ms response time, providing you with the excellent performance, it is such small size that makes it portable to take outside..
Plug and Play - Just plug the HDMI cable and USB cable to the corresponding interfaces of the monitor and the Raspberry Pi, then the Raspberry Pi screen can work, no driver. Easily achieve the five-points touch fuction..
OSD Menu Function - You can manage the colour/image adjustment, language setting for the display via OSD Menu function, the volume and power can be managed by the buttons, Raspberry Pi 4 monitor will give you the best use experience..
Multi-application - This Raspberry Pi display applies to Raspberry Pi devices as well as computers with HDMI interface, supporting Raspbian/ Raspberry Pi 400/ Ubuntu/ Kali/ Retropie/ Arduino/ Linux/ Win10/8/7 OS..
Different Design for Use - A screw thread at one side of the screen allows you to assemble the screen on the camera tripod, 4 screw holes (M4) with a 75mm spacing on the back of the monitor support to hang the screen on the wall, besides a bracket is included for the display to stand..
