UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A Mini Power Over Ethernet Expansion Board for Raspberry Pi 4 B 3 B+
Improvement: Based on the original U6109, we have improved the device compatibility to be compatible with more brands of switches.
also compatible with non-standard 48v power supply (only through 45+, 78-).
PoE input 40-57V with multiple protection circuits..
Designed For RPi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
Mini-Size: Nearly half the official size, does not occupy the GPIO pins of Raspberry Pi, saving more space for your other hardware, while still being able to be housed in most Raspberry Pi cases..
Well-ventilated Environment Recommended: It’s normal to become hot when the HAT operates. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation..
Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB
Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)
4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
Raspberry Pi 4 Computer Model B 8GB Single Board Computer Suitable for Building Mini PC/Smart Robot/Game Console/Workstation/Media Center/Etc.
powful cputhe cpu of the raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc.the operating clock has been changed from pi3's 1.2ghz to 1.5ghz, and the speed has become a different dimension with the updated architecture..
video output/gputhe on-board gpu of the raspberry pi 4 supports 4kp@60 and newly supports h.265 decoding, opengl es 3.0, etc.as for the video output, two micro hdmis with smaller connectors are installed, and the raspberry pi 4 also supports dual screen output..
usb 3.0with a new soc, the speed of the raspberry pi 4 around i/o has been improved, and finally usb 3.0 is supported.usb boot is faster and more convenient..
network&bluetoothgigabit ethernet (wired lan) has also been significantly speeded up from 300mbps of pi 3b + to 1000mbps (logical value).in addition, bluetooth supported version has been upgraded to 5.0, and the transfer speed of pi 4 has been doubled..
power input connectorthe power input connector of the raspberry pi 4 has been changed to usb type c. it is easier to use than micro usb and can supply a larger current reliably.the power requirement of raspberry pi 4 model b is 5v 3.0a, which is higher than the previous....
iUniker Raspberry Pi 4 4GB Starter Kit - 32GB Edition Raspberry Pi 4 Case Aluminum Case 20W 5V 4A Raspberry Pi 4 Power Supply with ON/Off Switch HDMI Cable for Pi 4B 4GB RAM
Includes Raspberry Pi 4 4GB Model B with (4GB RAM).
This Raspberry Pi 4B case is a Passive Cooling Aluminum Case.
5V 4A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on/ off your Pi.
Power supply with Professional Certification: TUV, RoHS Certification.
32GB High Speed Class 10 Card with Card Reader, Support All of the OS for your Pi.
LoveRPi MicroUSB to USB 4 Port Black OTG Hub for Raspberry Pi Zero
FULL SIZE USB PORTS FOR RASPBERRY PI ZERO: Simple plug and play USB hub for MicroUSB OTG capable devices including HP, Lenovo, Dell, and Acer Computers and Tablets..
REQUIRES HIGH QUALITY 1A OR HIGHER POWER CAPABILITY: The host device must provide adequate power to the connected USB devices or the USB devices may not be recognized or disconnect during use. For Raspberry Pi Zero, we recommend using our LoveRPi 2.5A certified power supply with power switch for best results..
NON-BLOCKING PORTS: Our hub is laid out so that multiple USB devices can be plugged in without blocking each other. It is laid out ideally so that each port can be used and interference is minimized..
FULL SPEED USB 2.0 PASSTHROUGH: Get the most bandwidth for your USB based devices without sacrificing performance through our reliable USB hub chipset..
AVAILABLE IN BLACK AND WHITE AND PROJECT READY: Need to add USB ports to a Raspberry Pi 0 project? The external case can be disassembled by pulling the top and bottom apart. Integrate it directly into your customized project!.
Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)
Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator
[What Is It] Small, portable with self contained radio and antenna, SHARI(SA818 Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
[Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
[Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
[Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
